Blukar K9138 High Power LED Flashlights User Guide
- June 13, 2024
- Blukar
Table of Contents
User Guide
Blukar LED Torch
Model No.: K9138
Welcome
Thank you for purchasing this Blukar product In order to ensure optimum
performance and safety, please read this user manual carefully and keep it for
future reference.
If you need any additional assistance, please contact our customer support
team or send us an email to support@blukar.com
Specifications
Material | Aluminium Alloy |
---|---|
Input | DC 5V/2A |
Power | lOW |
Modes | High/ Medium/Low/Strobe/ SOS |
Zoom Mode | Zoom Out/Zoom In |
Package Contents
1xLED Flashlight | 1xBattery Plastic Tube |
---|---|
1xUSB Charging Cable | 1xUser Manual |
3xAAA Batteries | 1xStorage Box |
1AAA Battery Holder |
Lighting Modes
- Short press the button to turn the light on / off and adjust the light mode
- In any operating mode, if you select a brightness mode and no operation for more than 8 seconds, the light will directly switch off when you press the button again.
Zoomable Design
Zoom Out: To enlarge the illuminated area
Zoom In: To gather light for maximum intensity
Installation of Batteries
- Open the back cover of the LED torch
- Note the positive (+) and negative (-) of the battery
- Install the torch properly with the positive side in and the negative side out
- Turn to close the back cover of the torch
You have 3 Types of Battery Options:
Charging
- Please make sure the product is fully charged when you use it for the first time
- The four-cell battery indicator shows the corresponding charge level
- Please use the included or certified USB cable for charging when the light is dimmed.
- Charging: blue light flashing; fully charged: the blue light is always on
- The blue light will flash when the flashlight power is weak
Warning
-
Avoid drops, impact, and extrusion.
-
The high light mode is very bright; in this mode it is normal for the torch to heat up The perceived temperature depends on personal perception and the ambient temperature[be maximum temperature is within the standard limits. The torch is safe to use.
-
Do not disassemble and replace the internal parts of the lamp by yourself, so as not to damage the product or even cause safety hazards.
-
The light source of this luminaire is not replaceable and the whole luminaire should be replaced when the light source has reached the end of its life.
-
It is not recommended to leave the product in an uncharged state.
If not used for a long period of time, charge the torch at least once every 3 months. -
Please use a safety-certified adapter when charging, and never overload the circuit, as this may cause electric shock or fire. Cut off the power in time after fully charged.
-
Do not use this product in extremely hot or cold environments (< – 25 C / > 40 “C)
-
Keep it away from water, fire, flammable gas and corrosive liquid.
-
Children should use this product under the supervision and guidance of adults.
-
Do not look directly into the light source to avoid eye irritation.
-
In order to prolong the service life of the battery, please do not overcharge or over discharge.
-
If you do not use the flashlight for a long time, please take out the battery When the AAA battery is exhausted, it needs to be replaced with a new battery directly and cannot be charged Old and new batteries cannot be mixed.
This product is subject to the provisions of European Directive 2012/19/EC.
The symbol showing a wheelie bin crossed through indicates that the product
requires separate refuse collection in the European Union. This applies to the
product and all accessories marked with this symbol. Products identified with
this symbol may not be discarded with normal household waste, but must be
taken to a collection point for recycling electric and electronic appliances.
This recycling symbol marks e.g. an object or parts of the material as
valuable for recycling. Recycling helps to reduce the consumption of raw
materials and protect the environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>