K F CONCEPT KF50.0021 4G LTE Outdoor Security Camera with SIM Card User Manual

June 14, 2024
K F CONCEPT

**K F CONCEPT KF50.0021 4G LTE Outdoor Security Camera with SIM Card User Manual

**

Disclaimer

Due to the continuous updating of our products&software, there may be a discrepancy between this user guide and the App interface. All the instructions are subject to the actual operation interface.
The contents of this manual are subject to change without notice in accordance with product updates or modification. Actual interface is subject to current the camera App version. Feedback or comments may be directed to E-mail: security@kfconcept.com, www.kfconcept.com


Pleas e Scan For More Information

Package Checklist

  • Camera*1

  • Solar Panel *1

  • Screw Package *1

  • Mounting Base *1

  • Instructions *1

  • Product Disclaimer *1

  • Type C Charging Cable *1

Product Description

Function Description
Power key Press and hold the power key, the red light indicates that the

device is turned on.
Reset key| Press and hold for 5 seconds until the blue light flashes, successfully resets
4G SIM card| Enables wireless communication
Micro SD card| Stores video image files

Charging Instructions

TIPS: When using the product for the first time, please use a DC 5V-1A adapter to fully charge the product for about 10h.
There are two options to generate the daily charging of the device:

  1. Use a DC 5V-1A/2A adapter to charge the battery
    Charging indicator

    Charging port
    Function| Indicator status
    ---|---
    While charging| Green light on
    Fully charged| No light

  2. Charge the battery with the solar panel
    Charging indicator
Charging port Function Indicator status
While charging Green light on
Fully charged No light

Product Connection

  1. Insert the SIM card into the device with the power off, then restart the device.
    Diagram 1
    SIM Card Slot (chip facing down)

    (insertion direction)
    TIPS: The complimentary SIM card has been optimized for this device. SIM card includes 100MB of complimentary data, which can be recharged once fully used up.
Function Indicator status
Turn on Press and hold the power key, the red light is on
Successfully identification of SIM card Red light and blue light flash

alternately for about 1 min and then it turns blue light stays on.
2. Download the App:
Two download methods:

1. Search for “UBox” to download using the App Store or Google Play.  

2. Scan the QR code to download  


Supporting devices: Smartphones, excluding iPad/PC/NVR. Supporting systems: Andorid 5.0 and above, iOS 10.0 and above.
Please open all App permissions during installation to ensure connectivity and permission to receive alerts and notifications.
TIPSI: During the APP installation process, there will be a E number of “open permissions” notifications, including: notifications, access to the photos, access to the microphone, access to the network. Please enable the appropriate permissions.

3.  **Register your account using your email**  

Register your account using your email

Tips :
Reasons for unsuccessful registration:

  1. The mobile phone network is not activated, or the App does not have permission to access network and location.
  2. Mailboxes with att.net, msn.com, or hotmail.com suffixes may not Receive an authentication code.
  3. If you do not receive the authentication code, please check your junk mailbox.
4.  **Add a device:  

** Click “Add a device’ in the App, select “Setup 4G Device”, and m continue adding according to instructions in the App.

TIPS: Failure to find/add device

  1. Possible reasons: the SIM card is not inserted, the SIM card is not inserted correctly, the operator of the SIM card is not compatible with the camera, the SIM card has no signal in local area, there’s no traffic in SIM card, the app usage permissions are not fully opened, or the APN of the SIM card is not correctly filled in.
  2. Ensure the phone is in a stable position when scanning the QR code, and keep a distance of 10-15cm between the mobile phone and the lens.
  3. Restart the device and try again;
  4. Please contact customer service at security@kfconcept.com if attempts to connect remain unsuccessful.

Product Installation

  1. Place the device in the area you intend to use it; and open the App to ensure the monitoring picture is smooth. If it is, move to the next step. m
  2. Install the device at a height of 2-3 meters above the ground (the installation position should not be at a 90° angle to the ground) so as to maximize the effectiveness of the infrared sensor.

TIPS:

  1. If amoving object approaches the PIR sensor vertically, the camera may not be able to detect any motion.
  2. The PIR should be placed in a location with adequate airflow which is not exposed to extreme sunlight or cold. Excessive temperature or light fluctuation may lead to malfunction.
  3. Keep the camera at least Im away from any wireless device to avoid interference.

Camera installation

  1. Please install the metal bracket on the wall;

  2. Adijust the camera bracket hole to align with the metal bracket hole;

  3. Tighten the camera bracket and fix to wall;

  4. Install solar panels at a right angel to ensure sufficient sunlight

App Installation

  1. App interface E
    Enter to select your family or smart device location

  2. Recharging 4G SIM card
    If you use the 4G SIM card included with product, you can recharge it in the following ways:

  3. 105 system mobile phone: scan the QR code on the SIM card package and follow instructions to recharge

  4. Android system mobile phone: scan the QR code on the SIM card package, follow instructions or use the recharge app

  5. Activity detection setting
    If the camera is placed in an area with frequent traffic and movement, it is recommended that the Detection sensitivity is turned off or set to low sensitivity, so as to avoid unnecessary alters and drain battery life


Specifications

PIR detection 10 M0 degrees
Resolution 2304 X1296
Weather resistance P66
Ambient temperature Working: 20 ~ 60 C, Humidity <90%   g0 o

Storage : 20 ~ 60 C, Humidity <90%
Input|  DC 5V-1A/2A

FAQs

  1. Fail to turn on
  2. Make sure you have turned on the power button.
  3. Please use a DC 5V-1A/2A power adapter to charge the battery. The light does not prompt – out of power
  4. Connection problems
  5. Device not binding: the SIM card is not inserted correctly, the SIM requires recharge, or App permission has not been enabled.
  6. Device offline: the device has no power, the SIM card has no balance, device signal weak (App display below 2 grids).
  7. If you cannot view the video remotely, ensure that the mobile phone network signal is sufficient.
  8. The PIR sensor can not trigger an alarm
  9. Please make sure that the camera working.
  10. Please make sure that the camera is installed in the correct position, © Please make sure that the distance and sensitivity of the PIR are set properly.

If there are still problems, select the customer service icon in the upper right corner of the App interface to speak to our team, or contact security@kfconcept.com

Notice

  1. This device is designed to record motion events, but not support H long-time video recording.
  2. The battery is built-in, please do not remove it from the camera. 3. When you dispose of used batteries, please comply with local waste and recycling regulations.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsi- ble for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio comma nictations. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna
  2. Increase the separation between the equipment and receiver connected.
  3. Consult the dealer or an experienced radio/TV technician for help. 4. This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

  1. This device may not cause harmful interference
  2. This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm the radiator of your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

FCC ID: 2AKFO-F8

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

K F CONCEPT User Manuals

Related Manuals