K F CONCEPT PO1-02 Lens Mount Adapter User Manual
- June 15, 2024
- K F CONCEPT
Table of Contents
K F CONCEPT PO1-02 Lens Mount Adapter
Note: Before using the adapter, please carefully check the information on the product page to ensure that the adapter is compatible with your camera and lens.
Reminder
- When shooting while moving, please hold your camera tightly if your lens is heavier than the camera.
- If you receive a “Can’t press the shutter” message during use, please set the menu mode to “Lensless Shutter” or “Shutter Priority”.
Installation And Disassembly
- Step 1: Align the red mark on the lens with the corresponding mark on the lens adapter, then rotate clockwise until tight.
- Step 2: Align the lens adapter with the corresponding mark on the camera mount, then rotate clockwise until tight.
Disassembly
- Step 1: Turn off the camera power and remove the mount adapter that is connected to the lens. Hold down the “lens release button” on the camera and rotate the adapter counterclockwise until it can be easily removed.
- Step 2: Hold down the “lens release button” on the lens adapter and rotate the lens counterclockwise until it can be easily removed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>