ZZiPP ZZIGGY, ZZIGGYW Portable Battery Powered Speaker User Manual

: June 3, 2024
: ZZiPP

Table of Contents

Introduction
SAFETY INSTRUCTIONS
FEATURES
BLUETOOTH CONNECTION
TWS LINK
POWER SWITCH FUNCTION
SPECIFICATIONS
Customers Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ZZiPP ZZIGGY, ZZIGGYW Portable Battery Powered Speaker User Manual

Introduction

Thanks for purchasing this ZZIPP product, please read this instruction carefully to understand how to operate the product correctly. Please store this instruction in a safe place after reading as a reference in the future.

SAFETY INSTRUCTIONS

To reduce the risk of electric shock, do not remove the cover or the side. Always contact qualified personnel for repairs.

To reduce the risk of fire and electric shock, do not expose the appliance to moisture and direct contact with liquids.

Safety Icon

To avoid the risk of fire or shock do not expose the product to rain or direct and excessive humidity. If the environment is much colder than the temperature of this product, wait for it to adjust to room temperature before turning it on. Do not use the product for permanent installations. Only connect the product to circuits grounded and protected. Always disconnect it from the power supply before cleaning it or replacing the fuse.
Replace the fuse with another of the same type and the same rated voltage.
Do not clean the product with solvents or aggressive detergents. Use a soft, clean cloth.
Before connecting the product to a power supply, make sure the cable of power supply is not damaged.
Make sure that the voltage of the electrical outlet is within the range indicated on the product (on the housing or on a sticker).
Never disconnect the product from the socket by pulling the cord.

FEATURES

2 MIC – LINE – HI Z Input
1 RCA LINE input
Bluetooth connectivity
TWS function for wireless connection of 2 speakers
1 LINE output
Battery powered with charge indicator
2 band EQ on MIC channels
Reverb on MIC channels
Signal clip indicator on each channel

Signal / clip indicator: Displays the input signal status in color. Green signal present. Red Signal clipping.
Volume control: Adjust the volume of your source.
Treble control: Adjust the high frequency balance of your source.
Bass control: Adjust the bass frequency balance of your source.
Reverb control: Adjust the amount of reverb applied to your source.
Select switch: move the switch to the
GUITAR or MIC position to select the type of source.
Channel input: Analog input for connecting micro phone (XLR) and instrument (TS unbalanced) cables.
RCA input: Input for the connection of line sauces for the left and right channel.
Line output: To connect another speaker. NOTE Line out is post mix.
TWS / Reset: Press the TWS button on the same time on both ZZIGGY and wait them paired (one TWS LED blink slow, another one doesn’t blink), then connect Bluetooth devices to achieve stereo sound play.
Power cord connector
Bluetooth pair button: Used to set up pairing with Bluetooth devices.

BLUETOOTH CONNECTION

Press the button to activate the Bluetooth (key 12 on the previous page).
Activate the Bluetooth on the source device and select from the list ZZIGGY devices.
Play an audio file from the source to activate the sound on the device.

TWS LINK

The TWS link allows wireless connection of 2 ZZIGGY speakers

Press the TWS button on both speakers.
Wait a few moments for the connection.
By connecting a Bluetooth source, playback on the two speakers will be stereo.

POWER SWITCH FUNCTION

When the speaker is connected to the power supply and the switch is in the ON position, the speaker works and the battery charges. (Slow charge)
When the switch is in the OFF position, the battery does not charge and the speaker is turned off.
When the switch is positioned on CHARGE ONLY, the speaker is off and only the fast charging circuit works, which allows the battery to be recharged faster than the ON position.

SPECIFICATIONS

Type	Multi position PA system battery powered
Trasducer	6,5” Woofer – 3 x 2,75” neodimium voice coil
Frequency response	60 – 18000 Hz
Max SPL	114 dB
Amplification	Class D
Power output	120 W
Input channels	3
EQ	2 band channel EQ
Effect	Reverb
Enclosure material	Polypropylene plastic
Mounting option	35mm pole mount, tilt-back, floor monitor
Power supply	110-240 V 50/60 Hz
Battery	Rechargeable lithium ion battery 6 x 2600 mA
Measure	330 x 250 x 290 mm
Weight	8 Kg

The declaration of conformity in the form complete can be found at the company:
Zzipp Group S.p.a. or available online at the site: zzippgroup.com
Refer to the competent authorities for information on authorizations or possible restrictions before using the device.