AUTIGE W27 3 In 1 Foldable Rotating Wireless Charging Stand User Manual

June 13, 2024
AUTIGE

AUTIGE W27 3 In 1 Foldable Rotating Wireless Charging Stand

AUTIGE-W27-3-In-1-Foldable-Rotating-Wireless-Charging-Stand-
product

Product Information

The product is a multi-functional blender designed to help you prepare various types of food and beverages. It is equipped with a powerful motor and stainless steel blades for efficient blending and grinding. The blender comes with a 1.5-liter glass jar, which is durable and easy to clean. It also has multiple speed settings and a pulse function for precise control over blending consistency. The product has a sleek and compact design, making it suitable for any kitchen countertop.

Product Usage Instructions

  1. Place the blender on a stable and flat surface.
  2. Plug in the power cord into a suitable electrical outlet.
  3. Ensure that the glass jar is properly attached to the blender base.
  4. Add the ingredients you want to blend into the glass jar. Make sure not to exceed the maximum capacity indicated.
  5. Place the lid securely on top of the glass jar.
  6. Select the desired speed setting based on your blending requirements. The lower speed is suitable for softer ingredients, while the higher speed is ideal for harder ingredients.
  7. If necessary, use the pulse function to achieve a more precise blending consistency.
  8. Press and hold the power button to start the blending process.
  9. Monitor the blending process and stop once you have achieved the desired consistency.
  10. After use, unplug the power cord from the electrical outlet.
  11. Carefully detach the glass jar from the blender base and clean it thoroughly with warm soapy water.
  12. Wipe the blender base with a damp cloth to remove any spills or residue.
  13. Ensure all parts are completely dry before storing the blender.

Overview

Wireless Charger Stand

Device Layout

AUTIGE-W27-3-In-1-Foldable-Rotating-Wireless-Charging-Stand-fig-
\(2\)

Horizontal/Vertical Mode

Folded Mode

Folds up minimally more portable

Product Parameter

  • Product name: Foldable 3 in 1 wireless charger Stand
  • Material quality: ABS + zinc alloy + Silicone
  • Dimensions: 888025 mm
  • Interface: USB-C
  • Input: 9V-2A,12V-2A
  • Mobile phone output: 5W/7.5W/10W/15W
  • iWatch output: 2.5W
  • Airpods: 3W
  • Compatibility: support mobile phones, Airpods, and iWatch that comply with the Qi standard

Steps for usage

  • The device is connected to the power supply through the charging cable, and then it can be powered on. when charging the mobile phone, place the mobile phone in the mobile phone charging area to start charging, the magnetic wireless charging will automatically locate itself by magnetic force.
  • After fully charged, simply take off the phone, during the charging process, if you need to terminate the charging, take it directly.
  • When charging the Apple Watch, place the Watch flat in the charging area to start charging the Watch. After fully charged, directly remove the Watch; During the charging process, if you need to terminate the charging, remove the iWatch directly.
  • When charging the Airpods, place the Airpods flat in the charging area to start charging;
  • After fully charged, simply remove the Airpods; During the charging process, if you need to terminate the charging, remove it directly.

Special Note

  1. When charging the Watch, recommended to use flat and vertical charging at 90°. Do not select 30°, as charging may not be possible at this angle.
  2. Recommended to use the supplied charging cable for power supply, and not to use the original iPhone cable.
  3. Please use a qualified PD protocol or QC protocol power charger, otherwise may lead to unstable or abnormal blink.
  4. If you use a protective shell, please use the mobile phone protection shell with magsafe function.
  5. Please do not use the mobile phone protection shell with a metal back or the mobile phone protection shell which thicker than 4mm.

LED light status indication

  • Power on ————— LED red and blue lights are on
  • Standby ———— LED red light is on
  • Charging ———— LED blue light is on
  • Full charged ———- LED blue light turn off
  • Foreign body status: LED red and blue lights flash alternately

Packaging accessories

  • 3 in 1 wireless charger *1
  • USB-C charging cable *1
  • Manual *1

The content of this manual and product specifications are subject to change without notice.

FCC statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of thedevicemust be respected.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

AUTIGE User Manuals

Related Manuals