JOY-iT DSO-200 High End Oscilloscope Instructions
- June 13, 2024
- JOY-It
Table of Contents
JOY-iT DSO-200 High End Oscilloscope
Product Information
| Product | DSO-200 |
|---|---|
| Description | The DSO-200 combines the power and functionality of a high-end |
oscilloscope with the form factor and stability of a handheld
device, making it the perfect tool. This makes the instrument
perfect for troubleshooting any type of electronic system.
Sampling Rate Bandwidth| Not specified in the provided text extract.
Vertical Sensitivity| Not specified in the provided text extract.
Horizontal Time Base| Not specified in the provided text extract.
Test Voltage Range| Not specified in the provided text extract.
Trigger Modes| Not specified in the provided text extract.
Coupling| Not specified in the provided text extract.
Product Usage Instructions
To use the DSO-200, please follow these steps:
- Connect the DSO-200 to the electronic system you want to troubleshoot using the appropriate cables.
- Make sure the DSO-200 is powered on and ready for operation.
- Adjust the vertical sensitivity and test voltage range settings according to your specific requirements.
- Select the desired trigger mode for capturing the waveform.
- Choose the appropriate coupling method for accurate signal measurement.
- Observe the display to view the waveform and analyze the electronic system’s behavior.
- Refer to the user manual’s additional information section for more detailed instructions or troubleshooting tips.
- If you encounter any issues or need further assistance, please refer to the support section of the user manual for contact information.
PRODUCT DESCRIPTION
The DSO-200 combines the power and functionality of a high-end oscilloscope with the form factor and stability of a handheld device, making it the perfect tool. This makes the instrument perfect for troubleshooting any type of electronic system.
PRODUCT SPECIFICATIONS
- SAMPLING RATE 2,5 MS/s
- BANDWIDTH 200 kHz
- VERTICAL SENSITIVITY 10 mV/Div – 20 V/Div
- HORIZONTAL TIME BASE 10 μs/Div – 50 s/Div
- TEST VOLTAGE RANGE X1: 80 Vpp (-40 V – 40 V) X10: 800 Vpp (-400 V – 400 V)
- TRIGGER MODES Auto, normal, single
- COUPLING AC, DC
- CALIBRATION (SQUARE WAVE) Frequency: 1 kHz, Duty Cycle: 50%
- BATTERY 1000 mAh Lithium Battery, rechargeable via USB-C (5 V / 1
OVERVIEW
CONTROLS
BUTTON /OPERATION /FUNCTION
- /Short press /Select parameter
- /Short press /Exit auto-calibration
- Long press Enter auto-calibration
- /Short press /Select parameter
- AUTO /Short press /Automatic calibration for frequencies above 45 Hz
- MODE /Short press /Change trigger mode
- Long press Change edge detection
- /Short press /Adjust parameter
- /Short press /Adjust parameter
- RUN /Short press /Run/pause waveform Enter auto calibration (Auto calibration page)
- /Long press /Show/hide parameters
- /Short press /Off
- Long press On
DISPLAY
- Trigger mode indicator
- Baseline indicator
- Vertical sensitivity
- 1X/10X mode indicator
- Horizontal time base
- Input coupling
- Pause/Running indicator
- Trigger voltage indicator
- Trigger edge indicator
ADDITIONAL INFORMATION
Our information and take-back obligations according to the Electrical and Electronic Equipment Act (ElektroG)
- SYMBOL ON ELECTRICAL AND ELECTRONIC EQUIPMENT:
- This crossed-out dustbin means that electrical and electronic appliances do not belong in the household waste.
- You must return the old appliances to a collection point. Before handing over waste batteries and accumulators that are not enclosed by waste equipment must be separated from it.
- RETURN OPTIONS:
- As an end user, you can return your old device (which essentially fulfills the same function as the new device purchased from us) free of charge for disposal when you purchase a new device.
- Small appliances with no external dimensions greater than 25 cm can be disposed of in normal household quantities independently of the purchase of a new appliance.
- POSSIBILITY OF RETURN AT OUR COMPANY LOCATION DURING OPENING HOURS:
- SIMAC Electronics GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn, Germany
- POSSIBILITY OF RETURN IN YOUR AREA:
- We will send you a parcel stamp with which you can return the device to us free of charge. Please contact us by email at Service@joy-it.net. or by telephone.
- INFORMATION ON PACKAGING:
- If you do not have suitable packaging material or do not wish to use your own, please contact us and we will send you suitable packaging.
SUPPORT
- We also support you after your purchase. If you have any questions or encounter any problems, please do not hesitate to contact us:
- E-Mail: service@joy-it.net.
- Ticket-System: https://support.joy-it.net.
- Phone: +49 (0) 2845 – 9360 – 50 (10 – 17 oʼclock)
- Please visit our website for more information:www.joy-it.net.
- WWW.JOY-IT.NET.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>