Arenti P2 T Smart Pan Tilt Wi-Fi Camera User Guide
- June 14, 2024
- Arenti
Table of Contents
QUICK GUIDE
Smart Pan Tilt Wi-Fi Camera
Quick start guide
Packing list
Product description
- LED indicator
- Microphone
- Speaker
- Reset
- Power port
- SD card slot
Notice
To reset the device, press and hold the reset button for 5s.
The camera beeps when the operation is completed.
LED indicator of camera:
| Flashing red light (slow) | Wait for network config |
|---|---|
| Flashing red light (fast) | Connecting the network |
| Fixed red light | Camera is malfunctional |
| Fixed blue light | Camera is working correctly |
Installation
-
Use the included mounting bracket to fix the camera to a clean surface.
-
Put the camera on a flat surface.
Product configuration
Scan QR code to download and install the Arenti APP. Also, you can search “Arenti” on App Store (IOS) or Google Play (Android).
https://apps.apple.com/app/arenti/id1495605136| https://play.google.com/store/apps/details?id=com.arenti.smartlife
Registration
Open the App. If you are a new user, tap to create a new account and follow
the prompts to complete account setup.
Note: You must agree with the Privacy Agreement.
Pairing
Open APP home page, Click “+” or “Add” and select icon according to actual
camera.
Power on the device. For about 30 seconds, the camera will emit start-up tone
and LED indicator will flash red slowly.
Note: When pairing, please put the camera and mobile phone close to the
router. If camera is not in the red slow blinking after 30 seconds of powering
on, press and hold the reset button for 5 seconds to reset, and then configure
the network again.
Select the Wi-Fi network and input the password, and then click “Next”. Make sure that your phone has connected to a fluent and steady Wi-Fi already.
Scan the QR code in your phone with the camera and click “Next”, when the camera comes out “dong dong dong” and LED indicator becomes solid blue.
If no device is found and the pairing process is not successful, please check below instructions:
- Wi-Fi network is 2.4GHz.
- Wi-Fi password entered is correct and the same Wi-Fi net work is used on the mobile device.
- Camera is in pairing mode.
- Check your WiFi for network activity.
If there doesn’t work please or you have any other problems, please contact support@arenti.com to get help.
Notice
If you have multiple cameras, please follow steps again to add devices one by
one.
To change Wi-Fi network, please restore the camera to factory settings and
follow steps to add the camera.
Specification
| Product name | P2 | P2T |
|---|---|---|
| Resolution | 1920×1080 | 2304 x 1296 |
| Angle of view | 100° | 110° |
| IR Distance | Up to 10m | |
| Pan/Tilt | 0°-355° (Pan); -15°-78° (Tilt) | |
| Working temp | -20°C to 50°C | |
| Local storage | Micro SD card (up to 128GB) | |
| Input power | DC 5V, 1A | |
| Consumption | Up to 4.5W | |
| Supported phone OS | iOS 9 / Android 5.0 and above version | |
| 2.4G Wi-Fi | 2412-2472 MHz (Max. power < 20dBm ) |
Legal notice
Support www.arenti.com
Symbols ****Direct current (DC)
**** Don’t throw batteries or out of order products with the household waste (garbage). The dangerous substances that they are likely to include may harm health or the environment. Make your retailer take back the products or use selective collect of garbage proposed by your city.
**** Hereby, we declares that the radio equipment type ‘P2(T)’ is in
compliance with the Directive 2014/53/EU The full test of the EU declaration
of conformity is available at the following Internet address:
www.arenti.com
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provide with antenna
installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Safety Information
Power Adapter Safety：
- The power plug is intended to serve as a disconnect device.Do not drop or cause an impact to the power adapter.
- If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens,stop using it at once. Continued use may lead to electric shocks, short circuits, or fire.
- Do not touch the device or the power adapter with wet hands. Doing so may lead to short circuits, malfunctions, or electric shocks.
Child’s safety
- Comply with all precautions with regard to child’s safety. Letting children play with the device or itsaccessories may be dangerous.
- The device and its accessories are not intended for use by children. Children should only use the device with adult supervision.
Operation safety
- Use the device under allowed humidity and temperature conditions.
- Do not aim the device at strong light sources (such as lamplight, and sunlight) when focusing it,to avoid reducing the lifespan of the CMOS sensor, and causing overbrightness and flickering.
- Observe local laws and regulations, and respect the privacy and legal rights of others.
© 2023. All rights reserved. All trade names are registered trademarks of
respective companies Apple, the Apple logo, iPhone are trademarks of Apple
Inc. registered in the U.S. and other countries. Google, the Google logo,
Android are trademarks of Google Inc. App Store is a service mark of Apple
Inc. Google Play is a service mark of Google Inc.
V1.0 202306
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>