ESR 2APEW Caricatore Wireless Magnetico User Guide
- June 14, 2024
- ESR
Table of Contents
ESR 2APEW Caricatore Wireless Magnetico
Instruction for use
Important Reminders
- For maximum charging speed, use a Quick Charge 2.0/3.0 charging adapter.
- Remove all cards and metal attachments other than the magnetic ring from your case before placing it on the charger.
- If the charger overheats while charging, remove your phone and allow the charger to cool before resuming charging.
- This charger is not compatible with cases thicker than 5 mm.
- Please be sure to align your phone with the center of the charger.
- The charger must be connected to a power source to begin wireless charging.
Safety Warnings
- To avoid damaging the device, do not attempt to disassemble it, expose it to an open flame, or submerge it in water.
- Do not expose the device to extremely hot, humid, or corrosive environments.
- Do not expose the device to corrosive liquids, as they will seriously damage the product and void the warranty.
- Do not attempt to disassemble or modify the device in anyway, as it may cause serious damage and void the warranty.
- Do not place the device in temperatures below O cc (32 cF) or above 60 °C (140 °F).
This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
This product is intended for use within Europe. Electronic Silk Road Corp. hereby declares that this product 2C503 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU,2014/35/EU,2014/30/EU. The Declaration of Conformity for the 2C503 is available from www.esrgear.com
This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>