Pipishell PIMFK3 Full Motion TV Wall Mount Instruction Manual

Pipishell PIMFK3 Full Motion TV Wall Mount Instruction Manual

Thank you for choosing this product! We strive to provide you with the best quality products and services in the industry. Should you have any issues, please don’t hesitate to contact us.

IMPORTANT SAFETY INFORMATION

• Please carefully read all instructions before attempting installation. If you DO NOT understand the instructions or have any questions or concerns, please contact our technical support line at 1-800-556-9829 (US/CA)/44-808-196-3885 (UK) or customer service at specified in this manual.
  [email protected].

• CAUTION: Avoid potential personal injuries and property damage!

• DO NOT use this product for any purpose that is NOT explicitly
  DO NOT exceed weight capacity. We are NOT liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

• This product is designed for use in wood stud, solid concrete, concrete block and brick walls  .

  • DO NOT install into drywall alone.

• The wall must be capable of supporting five times the weight of the TV and mount combined.

Weight Restrictions

If your TV weighs more, this mount is NOT compatible

WARNING
DO NOT exceed the maximum weight indicated. This mounting system is intended for use only within the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in failure of the mount and its accessories, causing possible damage and or injury.

Check the VESA Pattern of Your TV before the Installation

100mm 3.9″
200mm 7.9″
300mm 11.8″
400mm ≈ 15.7″

Minimum VESA pattern: 100mm / 3.9″ (W) x 100mm / 3.9″ (H)

If your TV VESA is greater than 400mm x 400mm / 15.7″ x 15.7″ or less than VESA 100mm x 100mm / 3.9″ x 3.9″, this mount is NOT compatible.

If this mount is NOT compatible, please contact customer service at [email protected] to find a compatible mount.

Verify Your Wall Construction

CAUTION
DO NOT install into drywall alone

If you are NOT sure of the wall construction, please contact our customer service at [email protected]

Tools Needed (NOT Included)

• **Tape Measure

**

• **Pencil

**

• **Electric Drill

**

• **7/16″ (11mm) Socket Wrench

**

• **Phillips Screwdriver

**

Tools Needed for Wood Stud Installation

• Stud Finder
  
  OR
  Awl
  

• **5/32″ (4mm) Wood Drill Bit

**

Tools Needed for Solid Concrete, Concrete Block and Brick Wall Installation

• **3/8″ (10mm) Concrete Drill Bit

**

• **Hammer

**

Supplied Parts and Hardware

WARNING: This product contains small items that could pose a choking hazard.

Before starting assembly, verify all parts are included and undamaged. DO NOT use damaged or defective parts.

If you require replacement parts, pleas contact our customer service at [email protected].

• PLEASE NOTE: NOT all hardware included in this package will be used.

Supplied Parts and Hardware

Step 1

• TV Bracket 02 x 2
  

• Washers (If needed)
  B1] x 4 M4/M5

[B2] x 4 M6/M8

• Spacers (If needed)
  [F1] x 8 L2.5mm

[F2] x 4 L10mm

[F3] x 4 L22mm

• TV Bolts (Only one size of the bolt fits your TV)
  NOTE: The bolts shown are actual size.
  M4 x 12mm [C1] x 4

M4 x 30mm [C2] x 4

M6 x 15mm [D1] x 4

M6 x 35mm [D2] x 4

M8 x 25mm [E1] x 4

M8 x 50mm [E2] x 4

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>