Blukar K9116-3 Head Lamp User Guide
- June 14, 2024
- Blukar
Table of Contents
Blukar K9116-3 Head Lamp
Welcome
Thank you for purchasing this Blukar product. To ensure optimum performance
and safety, please read this user manual carefully and keep it for future
reference. If you need any additional assistance, please contact our customer
support team or email us at
support@blukartech.com.
Package Contents
- 1 x LED Headlamp
- 1 x Headband
- 2 x 18650 Batteries
- 1 x USB Charging Cable
- 1 x User Manual
Specification
| Lighting Modes | 5Modes |
|---|---|
| Battery | 4400mAh |
| Input | DC 5V/1.3A |
| Power | 7W |
| Battery Voltage | DC 3.7V |
| Adjustment Angle | goo |
Structure Diagram
Battery Installation
- Please remove the plastic film of the batteries.
- Pay attention to the “+”and “-“side, install the battery in a correct direction.
Lighting Modes
Press the switch button to turn the light on/off and adjust the light mode.
Zoomable Design
Rotate the lens to adjust the focus, and you can freely choose floodlight mode
or spotlight mode.
- Floodlight Mode: Counterclockwise Rotation
- Spotlight Mode: Clockwise Rotation
Charging
- Charging: the red light is always on: Fully Charged: the green light is always on.
- Please make sure the product is fully charged when you use it for the first time.
- When the headlamp is in low power mode, the indicator light flashes red.
- Please use the supplied or certified USB cable to charge. When fully charged, please close the dust cover to protect the charging port.
Precautions
- Do not use the product while charging.
- The high light mode is very bright; in this mode it is normal for the headlamp to heat up. The perceived temperature depends on personal perception and the ambient temperature. The maximum temperature is within the standard limits. The headlamp is safe to use.
- It is not recommended to leave the product in an uncharged state. If not used for a long period of time, charge the headlamp at least once every 3 months.
- Do not overload the circuit while charging, as this may cause electric shock or fire.
- Do not use this product in extremely hot or cold environments.
- Keep it away from water, fire, flammable gas and corrosive liquid.
Warning
- Do not look directly into the light source to avoid eye irritation.
- Do not disassemble and replace the internal parts of the lamp by yourself to avoid damaging the products.
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
- Children should use this product under the supervision and guidance of adults.
TEL: 1-800-360-5881
EMAIL: support@blukartech.com
WEBSITE: www.blukartech.com
© Shenzhen Teng Xun Zhan Yi Technology Co., Ltd. All rights reserved.
Product Name: LED Headlamp
Model: K9116
Manufacturer: Shenzhen Teng Xun Zhan Yi Technology Co., Ltd.
Manufacturer Address: Room 302, Building 8, Yunli Intelligent Park, Fada
Road, Bantian Street, Longgang District, Shenzhen, Guangdong, China