Blukar K9112 LED Headlamp User Guide
- June 14, 2024
- Blukar
Table of Contents
Blukar K9112 LED Headlamp
Physical Diagram
- Sensor Button
- Switch Button
- Charging Port
- Headband
- Angle Adjustment Plate
- Headlamp
Welcome
Thank you for purchasing this Blukar product. To ensure the best performance
and safety, please read these instructions carefully before operating the
product. It is strongly recommended that you keep this manual for future
reference.
Packing List
- 1 × Headlamp
- 1 × Headband
- 1 × USB Cable
- 1 × User Manual
Specifications
- Brightness Mode: Strong Light /Low Light / Red Light / Red Strobe Light
- Battery capacity: 1200mAh
- Adjustable Angle: 45°
On / Off Mode
Press the switch button 1 time to turn on the light (Strong Light). Press the
switch button 2 times to switch the light (Low Light). Press the switch button
3 times to switch the light (Red Light). Press the switch button 4 times to
switch the light (Red Strobe Light). Press the switch button 5 times to turn
off the light.
Sensor Mode
- Press the sensor button 1 time to enter the sensor mode (Strong Light).
- Press the sensor button 2 times to switch the light (Sensor Mode, Red Light).
- Press the sensor button 3 times to turn off the sensor mode and turn off the light.
Note
- In any operating mode, if you select a brightness mode and no operation for more than 5 seconds, the light will directly switch off when you press the button again.
- In the induction mode, the blue light will light up at the button.
- Waving your hand within 15cm in front of the headlamp to turn on/off the light in sensor mode.
Charging Mode
Connect the power, the indicator light (red) is on, then enter the charging
mode; the green indicator light is always on when fully charged. Please use
the supplied or certified USB cable for charging. After charging, please close
the dust cover to protect the USB port.)
- TEL: 1-800-360-5881
- EMAIL: support@blukartech.com
- WEBSITE: www.blukartech.com
- Shenzhen Teng Xun Zhan Yi Technology Co., Ltd. All rights reserved.
- Product Name: LED Headlamp
- Model: K9112
- Manufacturer: Shenzhen Teng Xun Zhan Yi Technology Co., Ltd. Manufacturer Address: Room 302, Building 8, Yunli Intelligent Park, Fada Road, Bantian Street, Longgang District, Shenzhen, Guangdong, China
- www.blukartech.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>