EZVALO BL2 Wireless Speaker User Manual
- June 15, 2024
- EZVALO
Table of Contents
EZVALO BL2 Wireless Speaker
Specifications
- Model: BL1
- Power input: 5V 2A / 9V 2A
- Charging efficiency: 75%
- Battery capacity: 1800mAh
- Product dimensions: About 206.8 X 196 X 49.2mm / 8.1 X7.7 X1.9 inch(LXWXH)
- Product material: ABS + PP + Metal
- Speaker specifications: 40mm / 1.58 inch
- Bluetooth connection distance: 10m / 394 inch
Product Overview
Main features and functions of the product
- Wireless Speaker
- Wireless fast charging
- Phone holder function
- Simple and exquisite design
- Stepless dimming night lamp
- Charging distance 6 mm
Instructions
Power-on
- Connect the USB port of the USB cable to 5V 2A/9V 2A power adapter, and the other end to the Type-C port of the product.
Light touch
- Click to turn on/off the light;
- Press and hold to adjust brightness.
Wireless charging
After powering-on, place the device that needs to be charged close to the phone holder (aligned in the center) to start wireless charging.
- When charging wirelessly, please place the phone according to the indication on the sticker. If the phone is not in the right place, wireless charging will not be achieved or it’s efficiency affected;
- If there is any metal material on the phone case, please remove the phone case before wireless charging;
Note
- The wireless charging function will not be activated until power-on;
- It is recommended that the product should use a 9V 2A adapter for a better charging experience.
Bluetooth
- Press and hold: turn off Bluetooth;
- Press: turn on Bluetooth pairing. On your phone enter Bluetooth pairing; turn on the Bluetooth function of your phone, search for Bluetooth device named “EZVALO BL1”, click to select it and begin automatic pairing. After the pairing is complete there will be a sound indicating successful connection. If no pairing connection is made within a prolonged timeframe, it will automatically enter shutdown;
- Double click to connect or disconnect both speakers.
Note
- When Bluetooth is ready to connect, the status indicator light will flash, after successful connection the indicator light will be continuously on.
- When in the Bluetooth ready-to-connect or connection status, the indicator will turn off after 5 minutes.
Charging
The product has a built-in lithium battery. Please use the Type-C charging cable delivered with the product for charging;
- The indicator is red when charging;
- After fully charged, the red indicator will go out.
Safety Information
Notes
- If using a power adapter for power supply, please use an FCC or UL power adapter that meets all requirements of relevant standards;
- If charging with a phone case on, it is recommended that the case be less than 3 mm thick;
- If there is any metal material on the phone case, please remove the phone case before wireless charging, otherwise it may lead to heat damage;
- Do not use or keep this product under direct sunlight or high temperature for a long time;
- Do not charge the battery too close to magnetic cards, magnetic recording media, or precision instruments;
- Do not disassemble or modify this product;
- Please keep this product away from water or other liquids;
- If you want to clean this product, please disconnect the power first;
- Operating Temperature Range: 0~45°C;
- Please do not place the product on an inclined surface of 6° or more;
- The product has a built-in lithium battery and must not be exposed to an overheated environment.
For Germany market
Information on the collection and recovery rates achieved (Section 18 (4) sentence 3 ElektroG): https://www.take-e-way.de/leistungen/berichts-und- informationspflichten/
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
CAN ICES-005 (B)/NMB-005 (B)
This Class B RFLD complies with the Canadian standard ICES-005
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Caution
- Risk of fire or explosion or defeat the safeguard of equipment if the battery is replaced by an incorrect type. Replace only with the same or equivalent type.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- High or low extreme temperatures or low air pressure at high altitudes that the battery can be subjected to during use, storage or transportation.
- Leaving the battery in an extremely high temperature and/or low air pressure surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
IC
This device complies with Industry Innovation, Science and Economic Development Canada’ s licence-exempt RSSs. Operation is subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS – 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
Hereby, Guangzhou EZVALO Technology Company Limited declares that the radio
equipment type BL1 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.Ezvalo.com
RECYCLING
EZVALO Customer Service
- Email: serice@ezvalo.com
- MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>