Guangzhou Ezvalo Technology STZ07D Tap Light User Manual

EZVALO Wireless Charging Gadgets
USER MANUAL

Wireless Charger

1. Magnetic Charging Dock L (Left)
2. Magnetic Charging Dock R (Right)
3. Wireless Charging Area
4. Indicator Light L (Left)| 5. Indicator Light (Middle)
6. Indicator Light R (Right)
7. USB Type-C Port
---|---

How to use

1. Place a phone that supports wireless charging in the wireless charging area as shown in the above image. If the indicator light (M) flashes slowly, it indicates that the phone is charging.
2. Place the Portable Speaker and Tap Light on either magnetic charging dock to charge the devices.
3. All three indicator lights indicate the charging status. During charging, the corresponcing indicator light will flash stowly. The tight stops flashing and remains on when the device is fully charged.

If the phone is not charging normally, the indicator light (M) will start flashing rapidly. To ensure :

1. The back of your phone should not have any metal, pop sockcts, or credit cards.

2. Put the phone in the center of the charging surface (this lets the charging coil in your phone line up with the one inside the wireless charger).

3. Phone cases should be no thicker than 5 mm for effective charging.

Specifications

The charging port is the universal Type-C port

Compatible Devices
Apple: iPhone12/12Pro/12proMax/11/11pro/11pro Max/XS/XS Max/XR/X/8/8P
Huawei: Mate 40 Pro/Mate 30 Pro/Mate RS Pro/Mate 20 Pro/ P40 Pro/P30 Pro
Honor: V3OPro
Xiaomi: Mil1/Mi 10/MIX 3S/MIX 2S
OPPO: Ace 2
Samsung: $21/S20/$10/S9/S8/S7/Note 20/Note 10

This product supports quick wireless charging and short+ange wireless power transfer via magnetic induction. It is compatible with Qi-enabled devices. When used with a 5V adapter, its maximum output is 5W. When used with an adapter that is QC2.0 or above, its maximum output is LOW. It can detect foreign metallic objects.

Portable Speaker

1. Button
2. Speaker Grille
3. Charging Contact

How to use

Press the button and hold for 3 seconds. The speaker will emit a notification sound to indicate that it is on. The flashing indicator light indicates that the speaker is searching for a device for pairing. Turn on Bluetooth on your phone and search for “EZVALO STZ” under available devices. Select “EZVALO STZ” to pair automatically. Once paired, the speaker will emit a notification sound. The indicator light will remain on as long as the device is connected.
If no device is paired successfully within 10 minutes, the speaker will turn off automatically. Turn it on again to pair with the device.

Multi-Function Button

1. To turn on the speaker, press and hold for 3 seconds. Press once to pause. Press again to play;
2. Press twice to disconnect the current Bluetooth device and pair with a new device;
3. To tum off the speaker, press, and hold for 3 seconds.

Low Battery Alert
You will get a notification alert when the battery is low. Please place the speaker on the wireless charging pad’s magnetic charging dock for prompt charging.

Charging
Place the speaker on the charging pad’s magnetic charging dock. If the corresponding indicator light on the charger flashes slowly, it indicates that the speaker is charging It stops flashing and remains on when the speaker is fully charged.

Specifications

Tap Light

1. Touch Switch
2. Lampshade
3. Charging Contact

How to use

Turning On/Off
Touch the top of the Tap Light, where the touch switch is located. The Tap Light will light up gradually. Touch again to turn it off. The light will dim slowly until it is completely off (Please do not hit the Tap Light repeatedly).

Charging
Place the Tap Light on the charging pad’s magnetic charging dock. if the corresponding indicator light on the charger flashes slowly, it indicates that the Tap Light is charging. Kt stops flashing and remains on when the Tap Light is fully charged.

Specifications

Notes

Please read this instruction manual carefully before using the product and follow the instructions accordingly.

1. Please ensure the adapter that you’re using is certified, meets standard requirements, and is compatible with the product. Please avoid using or leaving the product in direct sunlight or high temperatures for prolonged periods;
2. Devices must be placed right side up for charging and stability;
3. Operating Temperature: 0~45°C;
4. Before discarding the product, detach the case with the appropriate tool and remove the lithium-ion battery inside. Before removal, ensure that the product is powered off. Please dispose of the battery in a safe manner:
5. Please do not place the product on an inclined surface of 6° or more.

FCC Statement

This device complies with part 15 FCC Rules. Operation is Subject To the following two conditions.

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications nat explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC radiation exposure (only WPT)
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Radiation Exposure Statement (only BT)
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

EZVALO Customer Service
Email: service@ezvato.com
MADE IN CHINA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>