ATEN US3312 2-port USB-C 4K Display Port KVM Switch User Manual
- June 15, 2024
- Aten
Table of Contents
ATEN US3312 2-port USB-C 4K Display Port KVM Switch
Product Information
- Product Name: 2-Port USB-C 4K DisplayPort KVM Switch with Remote Port Selector
- ( Model : US3312)
- Manufacturer : ATEN International Co., Ltd.
- Trademark : ATEN and the ATEN logo
- Part Number : PAPE-1223-X20G
- Release Date: September 2022
Package Contents:
- 1 2-Port USB-C 4K DisplayPort KVM Switch with Remote Port Selector
- 1 User Instructions
Hardware Overview
The KVM switch has the following components:
- Front View:
- 1 port LEDs
- 2 console ports
- 3 remote port selector
- 4 USB-C connector 1
- 5 USB-C connector 2
Support and Documentation
All information, documentation, firmware, software utilities, and
specifications can be found on the ATEN website at
http://www.aten.com/download/
For technical support, visit www.aten.com/support
Product Usage Instructions
Installation
- Connect the USB mouse, USB keyboard, and DisplayPort monitor into their respective ports on the US3312. Note: The USB Type-A ports can be used for USB peripheral sharing. Connect the USB peripherals and the USB keyboard or USB mouse into a USB hub, and then connect the USB hub into one of the USB Type-A ports.
- Connect the USB-C connectors of the attached KVM cables intotheir respective ports on the USB-C devices that you are installing.
Operation
- To switch KVM control between the two computers:
- Press the remote port selector. The port LED for the selected port will light green.
- To switch between high speed and normal speed modes:
- Press and hold the remote port selector for 3 seconds.
Package Contents
- 1 2-Port USB-C 4K DisplayPort KVM
- Switch with Remote Port Selector
- 1 user instructions
US3312 2-Port USB-C 4K DisplayPort KVM Switch with Remote Port Selector
Hardware Overview
Front View
- Port LEDs
- Console ports
- Remote port selector
- USB-C connector 1
- USB-C connector 2
Installation
WARNING: To prevent damage to your installation from power surges or static electricity, it is important that all connected devices are properly grounded.
- Connect the USB mouse, USB keyboard, and DisplayPort monitor into their respective ports on the US3312.
- Note : The USB Type-A ports can be used for USB peripheral sharing. Connect the USB peripherals and the USB keyboard or USB mouse into a USB hub, and then connect the USB hub into one of the USB Type-A ports.
- Connect the USB-C connectors of the attached KVM cables into their respective ports on the USB-C devices that you are installing.
Operation
- Press the remote port selector to switch KVM control between the two computers. The port LED for the selected port lights green.
Switching Between High Speed and Normal Speed Modes
To switch between high speed and normal speed modes, press and hold the
remote port selector for 3 seconds.
- High Speed Mode: The port 1 and port 2 LEDs fl ash once to indicate the device is set to high speed mode. This is the default setting.
- Normal Speed Mode: The port 1 and port 2 LEDs fl ash twice to indicate the device is set to normal speed mode.
Support and Documentation Notice
All information, documentation, fi rmware, software utilities, and specifi
cations contained in this package are subject to change without prior notifi
cation by the manufacturer. To reduce the environmental impact of our
products, ATEN documentation and software can be found online at
http://www.aten.com/download/
Technical Support
Scan for more information
- ATEN Website
- User Manual
© Copyright 2022 ATEN® International Co. Ltd.
ATEN and the ATEN logo are registered trademarks of ATEN International Co.,
Ltd. All rights reserved. All other trademarks are the property of their
respective owners.
Part No. PAPE-1223-X20G
Released : 09/2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>