MiBOXER WiFi + 2.4G Waterproof 5 in 1 LED Controller Instruction Manual

Mi-Light
Subordinate New Brand
Waterproof 5 in 1 LED Controller (WiFi + 2.4G)
Instruction Manual

Product features

This product uses WiFi + Bluetooth + 2.4G wireless transmission technology, low power consumption, strong anti-interference ability. WiFi + Bluetooth connect network can greatly enhance the connect network experience. When the router is disconnected, Bluetooth can also directly connect and control equipment at close range.
After successful network configuration using [Tuya Smart] app to achieve wireless dimming, remote control, group control, scene control, timing control, music movement, biorhythm, sleep plan, wake plan, one key execution, automation, etc.
functions. And it supports 2.4G remote control.

| 16 Millions of colors to choose| | Remote control Control distance 30m
---|---|---|---
| Color temperature adjustable| | Smartphone app control
| Smartphone app control| | Support third party voice control
| 2.4G RF wireless transmission technology| | Group contro
| WiFi wireless control support long-range control| | Biorhythm
| Auto-transmiting & Synchronization (only for remote control dimming)| | Support music rhythm
| Device sharing| | Sleep / wake up plan
| Tap-to-Run & automation| | Support scene customization
| Timing setting / countdown turn on / off LED light| | Do not disturb mode
| DMX512 controllable (Only for RGB+CCT output mode DMX512 LED transmitter is needed)| | Waterproof and dustproof grade IP67

Set up output mode

Set up correct output mode based on the feature of lights
Setting method: Press “SET” button continuously to switch output mode (attention: it will fog out without operation within 3 seconds)
Outout mode sheet (confirm output mode based on color of indicator)

Compatible with these 2.4G RF remote controls
(Purchased separately)

2.4G RF Remote control instruction

1.  Linking Code Instructions
   Power off 10 seconds and power on again or short press ” SET ” one timeShort press ” I ” button 5 times within 3 seconds.
   Lights blink 10 times quickly means unlinking is done successfully.
   Linking failed if light is not blinking slowly, Please follow above steps again.
   (Note: Light that have linked can’t link again)

2. Unlinking Code Instructions
   Power off 10 seconds and power on again or short press ” SET ” one timeShort press ” I ” button 5 times within 3 seconds.
   Lights blink 10times quickly means unlinking is done successfully.
   Unlinking failed if light is not blinking quickly, Please follow above steps again.
   (Note: Light haven’t linked that don’t need to unlink)

3. Auto transmitting & Synchronization (only for remote control)
   Remote signal auto transmitting
   One light can transmit the signals from the remote control to another light within 30m, as long as there is a light within 30m, the remote control distance can be limitless.
   Dynamic modes auto synchronization
   Multi lights can synchronize if they are in same dynamic mode and linked with same remote (distance between each light is within 30m)

4. Dynamic mode table selection (only for remote control)
   Select dynamic mode table 1:
   While the light is in static mode, short press “ $+” button 5 times quickly until blue light flashes 3 times slowly, static mode is activated successfully.
   Select dynamic mode table 2:
   While the light is in static mode, short press “ S- ” button 5 times quickly until yellow light flashes 3 times slowly, static mode is activated successfully.
   Dynamic mode table 1 (default)****

Speed
---|---|---
1| Dynamic Mode| Adjustable
2| White light Gradual change
3| RGB gradual change
4| Seven colors jump to change
5| Jump to change randomly
6| Red light gradual change
+Flash 3 times
7| Green light gradual change +Flash 3 times
8| Green light gradual change
+Flash 3 times
9| White light gradual change
+Flash 3 times
5. PWM high frequency / low frequency switching (only for remote control)
Switch to high frequency (16KHz):
Press “OFF” button 1 time within three seconds and press “ON” button 5 times, Activated successfully once led light flashes 2 times quickly.
Switch to low frequency (250Hz):**
Press “ON” button 1 time within three seconds and press “OFF” button 5 times, Activated successfully once led light flashes 2 times slowly.

6. “Do Not Disturb” mode is activated and shut down (default activated) Turn on “Do Not Disturb” mode (wide using in the area which have power failure frequently to save energy)
   2.4G RF Remote turn on and turn off instruction
   Turn on “Do Not Disturb” mode:
   Press “OFF” button three times within three seconds and press “ON” button three times, Activated successfully once led light flashes four times quickly.
   Attention: Do not disturb mode is activated
   1. When the light is OFF status (For example: Use app or remote to turn off light) The light is OFF status once you turn off power and turn on again. (User must turn off and turn on power twice times to activate light or use APP / remote to activate light) 2. When the light is ON status The light is ON status once you turn off and turn on power one time. Turn off “Do Not Disturb” mode: Press “ON” button three times within three seconds and press “OFF” button three times, closed successfully once led light  flashes four times slowly.
   Attention: The light will be always “ON” status if you turn on and turn off power once user closed “Do Not Disturb” mode. App turn on and off “Do Not Disturb” mode instruction (check details in page 8)

App turn on and off “Do Not Disturb” mode instruction (check details in page 8)

Smartphone APP control instruction

Network Configuration (Don’t support 5G router)

1. Download and install [Tuya Smart] app Search for [Tuya Smart] in Apple or Google store or scan following QR code to download and install the app. Please open the app click ” Register ” button to create account while using it in the first time, Log in directly if you already had account.https://miboxer.com/light/app/tuya.html

2. Network Configuration
   (1) Connect controller with power supply.
   (2) Confirm indicator light is flashing quickly (2 flashes per second),
   If indicator light isn’t in fast flashing state, there are two ways to enter:
   ♦ Long press ” SET ” key until indicator light flashing quickly.
   ♦ Power off and on controller 3 times.
   (3) Connect phone with home WiFi network in the 2.4GHz frequency.
   (4) Open homepage of app and click “+ ” button at the upper right corner of page.
   (5) Click ” Lighting ” on the left side of page and then click ” Light Source (BLE+Wi-Fi) ”
   (6) Follow app prompts to complete configuration.

App turn on and off “Do Not Disturb” mode (default ativated)
Click the light which need to be set up or group control — click “More” — click “Power-on behavior” — turn on or off

Alexa voice control instruction

Please add device into [Tuya Smart] app (check details in page 7), then start following steps

1. Open Alexa App
2. Click “More” on the bottom of right corner
3. Click “Skills & Games”
4. Click “ ” on the top of right corner
5. Type into “Smart life” and search
6. Click “Smart Life” skill, follow instruction to finish configuration and start voice control

Google Home voice control instruction

Please add device into [Tuya Smart] app (check details in page 7), then start following steps

1.  Open Google Home App
2. Click “+” on the top of left corner
3. Click “Set up device”
4. Click “Works with Google”
5. Click “ ” on the top of right corner
6. Type into “Smart life” and search
7. Click “Smart Life” skill, follow instruction to finish configuration and start voice control

DMX512 LED Transmitter Control (Purchased separately)

Only for RGB+CCT output mode

DMX512 LED Transmitter Link/Unlink

1. Follow instruction of DMX512 transmitter (FUTD01), Choose the zone for the light by pressing “ + ” or “ – ” (e.g. “CH12” means zone 12)

Link
The controller is powered off for 10 seconds and then powered on, or press “ SET” button 1 time.
Short press “ ” 3 times within 3 seconds while the indicator of controller is ON
Link is done once indicator of controller flashes 3 times slowly
Unlink
The controller is powered off for 10 seconds and then powered on, or press “ SET” button 1 time.
Short press “Ge)” 5 times within 3 seconds while the indicator of controller is ON
Unlink is done once indicator of controller flashes 10 times quickly

If the link or unlink failed, please follow the above steps again.

Single Color

Dual White

RGB

RGBWRGB+CCT

Instruction

Attention

1. Please turn off power supply before installation.
2. Please ensure input voltage to be same as requirements from device.
3. Don’t disassemble device if you are not expert, otherwise it will damage it.
4. Please do not use the light in the place with widely range metal area or strong electromagnetic wave nearby, otherwise, the remote distance will be seriously affected.

Made in China

Documents / Resources

| MiBOXER WiFi + 2.4G Waterproof 5 in 1 LED Controller [pdf] Instruction Manual
WiFi 2.4G Waterproof 5 in 1 LED Controller, WiFi, 2.4G Waterproof 5 in 1 LED Controller, Waterproof 5 in 1 LED Controller, 5 in 1 LED Controller, LED Controller, Controller
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>