ATEN VC160A Vga To Dvi Converter User Guide
- June 13, 2024
- Aten
Table of Contents
Simply Better Connections
VC160A
VGA to DVI Converter
User Guide
Hardware Review
VC160A Front view
- VGA IN Port
VC160A Rear view
- DVI OUT Port
- Power jack
VC160A Top view
- Online LED
- Power LED
VC160A Bottom view
- Screen Position Buttons
Hardware Installation
Note: Ensure that all devices are powered off and properly grounded
before connecting them to the VC160A.
To use the VC160A to view VGA source data in a DVI output display, do the
following:
- Use a VGA cable to connect the VGA output connectors on the PC to the VGA input connector on the VC160A.
- Use a DVI cable to connect the DVI output connector on the rear of the VC160A to the input connector on the DVI display. Power on your source and display device.
- (Optional) If the power LED does not light up, plug the provided power adapter into an AC power source appropriate for the device. Then power on the VC160A.
Note: The VC160A is able to power on via the VGA cable. In this case, plugging in the power adapter may not be necessary.
Screen Position Buttons
The VC160A VGA to DVI Converter has Screen Position Buttons (↵) to adjust the
image position on the screen. You can manually fix the image by doing the
following:
- Press the →/← or ↑ / ↓ accordingly to adjust the position of the image.
- Press within 3 seconds to save this setting. To restore the default image setting, press and hold down for more than 3 seconds.
Package Contents
1 VC160A VGA to DVI Converter
1 Power Adapter
1 User Instructions
Support and Documentation Notice
All information, documentation, firmware, software utilities, and
specifications contained in this package are subject to change without prior
notification by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and
software can be found online at http://www.aten.com/download/
Technical Supportwww.aten.com/support
Scan for more information
Product Page
https://www.aten.com/global/en/products/professional-audiovideo
/video-converters/vc160a/
Requirements
Device(s)
- A PC/Laptop equipped with a VGA card
- A Mac equipped with a DVI graphic card*
- A DVI enabled display device
*Note: A DVI to VGA Converter for Mac is required.
Cables
- VGA cable
- DVI cable
Note: The cables are not included in this package.
Supported Resolutions
| Resolution | Frequency (Hz) |
|---|---|
| 640x480p | 60 |
75
800x600p| 60
75
1024x768p| 60
75
1152x864p| 60
75
1280x720p| 60
75
1280x768p| 60
75
1280x800p| 60
75
1280x1024p| 60
75
1366x768p| 60
1440x900p| 60
75
1600x1200p| 60
1680x1050p| 60
1920x1080p (RB)| 60
1920x1200p (RB)| 60
Note: 1. If the display is blank or showing an incorrect screen ratio, check your display’s manual for supported resolutions.
2. Some Mac/Apple devices have interlaced video signal that the VC160A is unable to process.
Specifications
| Function | VC160A |
|---|---|
| Connectors | Video In |
| Video Out | 1 x DVI-D Female (White) |
| Power | 1 x DC Jack |
| LEDs | Power |
| Online | 1 (Blue) |
| Switches | Direction Adjustment |
| Memory | 1 x Semi-recessed Pushbutton |
| Video | Up to 1080P (HDTV) / 1920 x 1200 @ |
60 Hz (PC)
Power Consumption| DC5.3V, 2.8W
Environment| Operating Temp.| 0-50°C
Storage Temp.| -20-60°C
Humidity| 0-80% RH, Non-condensing
Physical Properties| Housing| Metal
Weight| 0.15 kg
Dimensions (LxW x H)| 7.90 x 7.81 x 2.43 cm
© Copyright 2023 ATEN® International Co. Ltd.
ATEN and the ATEN logo are registered trademarks of ATEN International Co.,
Ltd.
All rights reserved. All other trademarks are the property of their respective
owners.
Part No. PAPE-1285-360G
Released: 06/2023
www.aten.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>