ATEN CS1922ATC Display Port KVMP Switch for ATC User Guide
- June 15, 2024
- Aten
Table of Contents
ATEN CS1922ATC Display Port KVMP Switch for ATC
Product Information
The CS1922ATC and CS1924ATC are 2-port and 4-port USB 3.0 4K DisplayPort KVMPTM switches designed for ATC. They are manufactured by ATEN and have the following specifications:
- Part No.: PAPE-1223-Y40G
- Released: 02/2023
The switches have various ports and buttons:
- Front View (CS1922ATC):
- Port LEDs
- Mode selection pushbutton
- Port selection pushbuttons
- Audio jacks
- USB 3.1 Gen 1 Type-A port
- Grounding terminal
- Power jacks
- Rear View (CS1922ATC):
- USB Micro-B port (firmware upgrade)
- RJ-11 port
- USB 2.0 Type-A ports
- RS-232 serial port
- Audio jacks
- USB 3.1 Gen 1 Type-A port
- Primary/secondary switch
- DisplayPort out
- Front View (CS1924ATC):
- Port LEDs
- Mode selection pushbutton
- Port selection pushbuttons
- Audio jacks
- USB 3.1 Gen 1 Type-A port
- Grounding terminal
- Power jacks
- Rear View (CS1924ATC):
- USB Micro-B port (firmware upgrade)
- RJ-11 port
- USB 2.0 Type-A ports
- RS-232 serial port
- Audio jacks
- USB 3.1 Gen 1 Type-A port
- Primary/secondary switch
- DisplayPort out
Product Usage Instructions
- Ground the CS1922ATC / CS1924ATC by connecting one end of agrounding wire to the grounding terminal and the other end to a suitable grounded object. Note: Do not omit this step. Proper grounding helps to prevent damage to the unit from power surges orstatic electricity.
- Connect your USB keyboard and USB mouse to the unit’s USB 2.0 Type-A ports.
- Connect your DisplayPort-enabled display to the unit’s DisplayPort output port.
- Connect your primary microphone and speakers to the unit’s audio jacks located on the front panel. Optionally, connect your secondary microphone and speakers to the unit’s audio jacks located on the rear panel. Note: The microphone and speakers connected intothe front panel have priority over those connected into thesejacks.
- Using the provided cables, connect the audio, video, RS-232, and USB ports of up to 2 PCs (for CS1922ATC) or 4 PCs (for CS1924ATC) to the KVM ports section on the KVM switch. Note: Make sure that all the connectors from one PC are connected to the same KVM ports section (all in CPU1, all in CPU2, etc.).
Package Contents
CS1922ATC
- 1 CS1922ATC 2-Port USB 3.0 4K DisplayPort KVMP™ Switch for ATC
- 2 DisplayPort 1.2 cables
- 2 USB 3.1 Type-A to Type-B cables
- 2 microphone cables
- 2 speaker cables
- 2 power adapters and power cords
- 1 user instructions
CS1924ATC
- 1 CS1924ATC 4-Port USB 3.0 4K DisplayPort KVMP™ Switch for ATC
- 4 DisplayPort 1.2 cables
- 4 USB 3.1 Type-A to Type-B cable
- 4 microphone cables
- 4 speaker cables
- 2 power adapters and power cords
- 1 user instructions
Support and Documentation Notice
All information, documentation, firmware, software utilities, and
specifications contained in this package are subject to change without prior
notification by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and
software can be found online at http://www.aten.com/download/
Technical Support
www.aten.com/support
Scan for more information
Hardware Overview
-
port LEDs
-
mode selection pushbutton
-
port selection pushbuttons
-
audio jacks
-
USB 3.1 Gen 1 Type-A port
-
grounding terminal
-
power jacks
Console Ports Section -
USB Micro-B port (firmware upgrade)
-
RJ-11 port
-
USB 2.0 Type-A ports
-
RS-232 serial port
-
audio jacks
-
USB 3.1 Gen 1 Type-A port
-
primary/secondary switch
-
DisplayPort out
KVM Ports Section -
DisplayPort in
-
RS-232 serial ports
-
audio jacks
-
USB Type-B ports
Installation
-
Ground the CS1922ATC / CS1924ATC by connecting one end of a grounding wire to the grounding terminal and the other end to a suitable grounded object.
Note : Do not omit this step. Proper grounding helps to prevent damage to the unit from power surges or static electricity. -
Connect your USB keyboard and USB mouse to the unit’s USB 2.0 Type-A ports.
-
Connect your DisiplayPort-enabled display to the unit’s DisplayPort output port.
-
Connect your primary microphone and speakers to the unit’s audio jacks located on the front panel. Optionally, connect your secondary microphone and speakersto the unit’s audio jacks located on the rear panel.
Note : The microphone and speakers connected into the front panel have priority over those connected into these jacks. -
Using the provided cables, connect the audio, video, RS-232, and USB ports of up to 2 PCs (for CS1922ATC) or 4 PCs (for CS1924ATC) to the KVM ports section on the KVM switch.
Note : Make sure that all the connectors from one PC are connected to the same KVM ports section (all in CPU1, all in CPU2, etc.). -
(Optional) Connect your USB peripherals to the unit’s USB 3.1 Gen 1 Type-A ports.
-
(Optional) Connect your RS-232 serial devices such as a printer to the unit’s RS-232 serial port from the console ports section.
-
Connect the power adapters to the unit’s power jacks. Now the CS1922ATC / CS1924ATC is powered on.
-
Power on the computers, displays, and other connected devices.
Operation
There are several convenient methods you can use to operate the CS1922ATC /
CS1924ATC to switch KVM control to a connected device.
Manual Switching
To bring complete focus (KVM, USB, and audio) to a computer, use one of the
following methods.
- Press the port selection push button that corresponds to that computer.
- Press the mode selection pushbutton once (the mode icons light up) and then press the port selection pushbutton that corresponds to that computer, and all three port icons light up.
Hotkey Switching
Press and hold [Ctrl] [n]: Brings the KVM, USB, and audio focus to the
computer attached to the port corresponding to the specified port ID.
Note : The n stands for the computer’s port ID number (1 or 2 for
CS1922ATC; 1, 2, 3, or 4 for CS1924ATC).
For more information on the unit’s operation, please refer to the user manual.
www.aten.com
© Copyright 2023 ATEN® International Co. Ltd.
ATEN and the ATEN logo are registered trademarks of ATEN International Co.,
Ltd.
All rights reserved. All other trademarks are the property of their respective
owners.
Part No. PAPE-1223-Y40G Released: 02/2023