infobit DP-T-22 2CH Analog Audio To Dante Encoder User Manual
- June 13, 2024
- infobit
Table of Contents
infobit DP-T-22 2CH Analog Audio To Dante Encoder
iTrans DP-T-22 2CH Analog Audio to Dante Encoder
Thank you for purchasing the iTrans DP-T-22 2CH Analog Audio to Dante
Encoder. This product is an audio transmitter based on the Dante Ultimo
solution. It encodes the audio signal and transmits it to the decoder through
a Dante network, supporting AES67 RTP audio transmission. The iTrans DP-T-22
also supports 2 channels of unbalanced or balanced analog audio input, with a
5-level sensitivity adjustment and PoE (Power over Ethernet) power supply.
Features:
- Analog audio input supports balanced/unbalanced audio input (unbalanced access to + and GND)
- Audio sampling rate supports 44.1KHz, 48KHz, 88.2KHz, and 96KHz, @16bit/24bit/32bit
- Dante solution supports AES67 RTP audio transmission
- Audio input supports 5-level sensitivity adjustment: +24dBu, +4dBu, 0dBu, 0dBV, and -10dBV
- Supports DC 12V power supply and PoE power supply (IEEE802.3af Class 1 compliant)
Package Contents:
- 1 x iTrans DP-T-22 2CH Analog Audio to Dante Encoder
Specifications:
- Video Network Bandwidth: 100M
- Audio Formats: PCM 2.0, @16bit/24bit/32bit, 44.1KHz/48KHz/88.2KHz/96KHz
- Transmission Distance: 100m/328ft CAT6/6A
- Control Method: Dante Controller
- Connection Input: [6-pin Phoenix, 3.81mm]
- Mechanical Housing: Metal Enclosure
- Color: Black
- Weight Power Supply: 230g
- Power Supply: DC input: 12V1A, PoE input: IEEE802.3af Class 1
- Power Consumption: 1.2W
- Operation Temperature: Storage temperature Relative Humidity 20
– 90% RH (no condensation)
Operation Controls and Functions:
| No. | Name | Function Description |
|---|---|---|
| 1 | AUDIO INPUT ports (CH1/CH2) | 2-channel analog audio input supports balanced |
and unbalanced
audio.
2| DC 12V| DC 12V/1A power input port.
3| DANTE (PoE)|
4| SENSITIVITY switch| Used for audio sensitivity adjustment: +24dBu, +4dBu,
0dBu,
0dBV, and -10dBV, respectively.
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating, or adjusting this product. Please keep this
manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shocks, lightning strikes, etc. Use of
surge protection systems is highly recommended in order to protect and extend
the life of your equipment.
Introduction
The iTrans DP-T-22 is an audio transmitter based on the Dante Ultimo solution. It encodes the audio signal and then transmits to the decoder through the Dante network, supporting AES67 RTP audio transmission. This product also supports 2 channels of unbalanced or balanced analog audio input, 5-level sensitivity adjustment and PoE power supply.
Features
- Analog audio input supports balanced/unbalanced audio input (unbalanced access to “+” and “GND”)
- Audio sampling rate supports 44.1KHz, 48KHz, 88.2KHz and 96KHz, @16bit/24bit/32bit
- Dante solution supports AES67 RTP audio transmission
- Audio input supports 5-level sensitivity adjustment： + 24dBu, +4dBu, 0dBu, 0dBV and -10dBV
- Support DC 12V power supply and PoE power supply (IEEE802.3af Class 1 compliant)
Package Contents
- 1× iTrans DP-T-22
- 1× 6pin-3.81mm Phoenix Connector (male)
- 1× 2pin-3.81mm Phoenix Connector (male)
- 1× User Manual
Specifications
Technical
Video Network Bandwidth| 100M
Audio Formats| PCM 2.0, @16bit/24bit/32bit, 44.1KHz/48KHz/88.2KHz/96KHz
Transmission Distance| 100m/328ft (CAT6/6A)
Control Method| Dante Controller
Connection
Input
| 1 × Dante [RJ45 connector, PoE] 2 × AUDIO INPUT [6-pin phoenix, 3.81mm]
Mechanical
Housing| Metal Enclosure
Color| Black
Dimensions| 130mm[W] × 70mm[D] × 26mm[H]
Weight| 230g
Power Supply| DC input: 12V/1A
PoE input: IEEE802.3af Class 1
Power Consumption| 1.2W
Operation Temperature| 32 – 104°F / 0 – 40°C
Storage temperature| -4 – 140°F / -20 – 60°C
Relative Humidity| 20 – 90% RH (no condensation)
Operation Controls and Functions
| No. | Name | Function Description |
|---|
1
| ****
AUDIO INPUT (CH1/CH2)
| 2-channel analog audio input ports, support balanced and unbalanced audio.
2| DC 12V| DC 12V/1A power input port.
3
| ****
DANTE (PoE)
| • Dante digital audio input port. Connect to the Network Switch through RJ45 line, supporting PD power supply.
• The green LINK LED is always on after normal connection.
• The yellow DATA LED is flashing when there is data transmission.
4
| SENSITIVITY
switch
| Used for audio sensitivity adjustment,
+24dBu, +4dBu, 0dBu, 0dBV and
-10dBV, respectively.
Application Example
Trademarks
Dante® is a registered trademark of Audinate Pty Ltd. All other trademarks are
the property of their respective owners.
www.infobitav.com
info@infobitav.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>