infobit DP-R-22 Dante to 2CH Analog Audio Decoder User Manual
- June 13, 2024
- infobit
Table of Contents
infobit DP-R-22 Dante to 2CH Analog Audio Decoder User Manual
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.
Introduction
The iTrans DP-R-22 is an audio receiver based on the Dante Ultimo solution. It decodes the signal from the encoder, and converts I2S audio signal to analog signal through DAC module to output. This product transmits signals through Dante network, supporting AES67 RTP audio transmission. It also supports 5-level gain adjustment and PoE power supply
Features
- Analog audio output supports balanced/unbalanced audio output (unbalanced access to “+” and “GND”)
- Audio sampling rate supports 44.1KHz, 48KHz, 88.2KHz and 96KHz, @16bit/24bit/32bit
- Dante solution supports AES67 RTP audio transmission
- Audio output supports 5-level gain adjustment： +18dBu, +4dBu, 0dBu, 0dBV and -10dBV
- Support DC 12V power supply and PoE power supply (IEEE802.3af Class 1)
Package Contents
- 1 × iTrans DP-R-22
- 1 × 6pin-3.81mm Phoenix Connector (male)
- 1 × 2pin-3.81mm Phoenix Connector (male)
- 1 × User Manual
Specifications
Technical
Video Network Bandwidth| 100M
Audio Formats| PCM 2.0, @16bit/24bit/32bit, 44.1KHz/48KHz/88.2KHz/96KHz
Transmission Distance| 100m/328ft (CAT6/6A)
Control Method| Dante Controller
Connection
Input| 1 × Dante [RJ45 connector, PoE]
Output| 2 × AUDIO OUTPUT[6-pin phoenix, 3.81mm]
Mechanical
Housing| Metal Enclosure
Color| Black
Dimensions| 130mm[W] × 70mm[D] × 26mm[H]
Weight| 230g
Power Supply| DC input: 12V/1APOE input: IEEE802.3af Class 1
PowerConsumption| 1.5W
Operation Temperature| 32 – 104°F / 0 – 40°C
Storage temperature| -4 – 140°F / -20 – 60°C
Relative Humidity| 20 – 90% RH (no condensation)
Operation Controls and Functions
| No. | Name | Function Description |
|---|---|---|
| **** 1 | AUDIO OUTPUT (CH1/CH2) | 2-channel analog audio output ports, |
supporting balanced and unbalanced audio.
2| DC 12V| DC 12V/1A power input port.
**** 3| **** DANTE (PoE)|
- Dante digital audio input port. Connect to the Network Switch through RJ45 line, supporting PD power supply.
- The green LINK LED is always on after normal connection.
- The yellow DATA LED is flashing when there is data transmission.
4| GAIN switch| Used for audio output gain adjustment, +18dBu, +4dBu, 0dBu, 0dBV and -10dBV, respectively.
Application Example
Trademarks
Dante® is registered trademark of Audinate Pty Ltd. All other trademarks are
the property of their respective owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>