K RCHER 1.698-917.0 Stationary Diesel Fired Hot Water High Pressure Cleaner Instruction Manual
- June 13, 2024
- K RCHER
Table of Contents
HDS 9/14-4 ST
Stationary diesel-fired hot water high-pressure cleaner
Order no: 1.698-917.0
- Integral pressure relief system
- SDS system
- Dry running protection
Technical data
| EAN code | 4.05428E+12 | |
|---|---|---|
| Current type | Ph / V / Hz | 3 / 400 / 50 |
| Flow Rate | l/h | 500 – 930 |
| Operating pressure | bar / MPa | 30 – 140 / 3 – 14 |
| Temperature (supply 12°C) | °C | min. 80 – max. 155 |
| Power rating | kW | 6.4 |
| Consumption fuel oil | kg/h | 5.8 |
| Water feed | 3/4″ | |
| number of simultaneous users | 1 | |
| Mobility | Stationary | |
| Fuse protection | A | 16 |
| Weight (with accessories) | kg | 146.9 |
| Weight incl. packaging | kg | 151.4 |
| Dimensions (L × W × H) | mm | 1110 × 565 × 690 |
Equipment
| SDS system | |
|---|---|
| System pressure relief | |
| Flame monitor | |
| Ready for Servo Control | |
| Ready for remote control | |
- Included in delivery.
Water-cooled 4-pole electric motor (oil-heated)
- Long service life.
- Improved efficiency.
- Guaranteed quiet operation.
Burner technology (oil-heated)
- High heat output.
- Spiral heating coil for a compact design.
- Upright design prevents condensation and corrosion.
Water treatment unit
- Truck wash
- Truck wash
EQUIPMENT FOR HDS 9/14-4 ST 1.698-917.0
| | Order no.| Description|
---|---|---|---|---
TRIGGER GUNS
Trigger guns
EASY! Force Advanced| 1| 4.118-005.0| Effortless, not energy-sapping: the
EASY!Force high-pressure gun uses the recoil force of the high-pressure jet to
reduce the holding force for the operator to zero.|
Conversion kit 1 from high pressure hose| 2| 4.111-050.0| A conversion kit
which enables secure connection from an M22 hose onto our innovative EASY!
Force trigger gun. The kit includes the EASY! Force Trigger gun, adaptors and
lance.|
Conversion kit 2 from device| 3| 4.111-051.0| Provides all the parts required
to utilise our EASY! Force technology even on our non-Easy! Force machines.
Including adaptors, lance, Easy!Force trigger gun and hose.|
Conversion kit 3 only EASY! Force| 4| 4.111-052.0| A conversion kit for the
EASY! Force gun, which includes the correct adaptors to connect to the M22
style lance and hose.|
Easy Press high-pressure gun with holding power reduction (Kircher
patent)
Easy press high-pressure trigger gun with SoftGrid| 5| 4.775-463.0| Easy press
high-pressure trigger gun with softgrip. For high-pressure hoses DN 6 and DN 8
with 11 mm swivel diameter.|
6| 4.775-466.0| Easy press high-pressure trigger gun with integrated adapter
for connecting to high-pressure hoses M 22 × 1.5.|
Servo Control
Servo Control, 750 l/h – 1100 l/h| 7| 4.118-008.0| Water quantity and pressure
regulated directly from the hand spray gun.|
8| 4.775-470.0| Water flow and pressure control on the trigger gun.|
SPRAY LANCES
Rotating spray lances
LED nozzle light| 9| 2.680-002.0| LED work light for assembly on EASY!Force
spray lances, providing a clear view in poor lighting conditions ensuring
controlled cleaning results.|
Spray lance, 250 mm, rotatable| 10| 4.112-027.0| 250 mm stainless steel lance
(manual coupling) with ergonomic handle for ease of use and protection.
Rotatable 360° under pressure.|
Spray lance, 400 mm, rotatable| 11| 4.112-024.0| 400 mm stainless steel lance
(manual coupling) with ergonomic handle for ease of use and protection.
Rotatable 360° under pressure.|
Spray lance, 600 mm, rotatable| 12| 4.112-007.0| 600 mm stainless steel lance
(manual coupling) with ergonomic handle for ease of use and protection.
Rotatable 360° under pressure.|
Spray lance, 840 mm, rotatable| 13| 4.112-006.0| 850 mm stainless steel lance
(manual coupling) with ergonomic handle for ease of use and protection.
Rotatable 360° under pressure.|
Spray lance, 1050 mm, rotatable| 14| 4.112-000.0| 1050 mm stainless steel
lance (manual coupling) with ergonomic handle for ease of use and protection.
Rotatable 360° under pressure.|
- Included in delivery.
- Available accessories.
| | Order no.| Description|
---|---|---|---|---
SPRAY LANCES
Rotating spray lances
Spray lance, 1550 mm, rotatable| 15| 4.112-018.0| 1550 mm stainless steel
lance (manual coupling) with ergonomic handle for ease of use and protection.
Rotatable 360° under pressure.|
Spray lance, 2050 mm, rotatable| 16| 4.112-021.0| 2050 mm stainless steel
lance (manual coupling) with ergonomic handle for ease of use and protection.
Rotatable 360° under pressure.|
Spray lance extender, 1000 mm| 17| 4.112-048.0| Spray lance extension with
EASY! Lock connection. Length 1000 mm.|
Spray lance, 600 mm, rotatable| 18| 4.760-664.0| 600 mm stainless steel lance
(manual coupling) with ergonomic handle for ease of use and protection.
Rotatable 360° under pressure.|
Spray lance, 1050 mm, rotatable| 19| 4.760-660.0| 1050 mm stainless steel
lance (manual coupling) with ergonomic handle for ease of use and protection.
Rotatable 360° under pressure.|
Double lance
Double lance, 960 mm| 20| 6.394-665.0| 960 mm double lance for variable
pressure adjustment on handle at full water flow rate. Suitable for
agricultural use ( e.g. stable cleaning).|
21| 2.112-016.0|
Angular spray lance
WC and gutter lance| 22| 4.112-029.0| Stainless steel lance WC and gutter with
nozzle insert. Specially shaped for effective and hygienic cleaning of gutters
and toilets.|
Flexible spray lance
Flexible lance, 1050 mm| 23| 4.112-035.0| 1050 mm flexible lance with variable
bend from 20° to 140°, ideal for cleaning difficult to reach areas, e.g.
gutters.|
High pressure articulated joint| 24| 4.112-057.0| For hard-to-reach areas:
High-pressure articulated joint with infinite angle adjustment up to 120°.
Simply attach directly to the spray lance of the pressure washer.|
Gutter cleaner
Gutter cleaning lance| 25| 2.112-015.0| The lance is suited for cleaning of
gutter systems. Because of the shape of the lance and the special nozzle the
gutter can be cleaned without removing the cover plates.|
Undercarriage spray lance
Underbody lance| 26| 4.112-032.0| Stainless steel lance for effective and easy
underbody and wheel arch cleaning. Without high-pressure nozzle.|
Additional handle
Additional handle for EASY! Lock spray lances| 27| 4.321-380.0| Comfortable in
every situation – the additional handle is easy to attach to the spray lance
of our new EASY! Lock generation and makes work easier by allowing you to
adjust your posture to suit the particular task.|
ROTARY NOZZLES (DIRT BLASTERS)
Dirt blaster, large
Dirt Blaster Nozzle, large, 055/060| 28| 4.114-036.0| The dirt blaster with
rotating pencil jet offers 10 times better cleaning performance. Ceramic
nozzle and bearing ring for a long service life. Further data: Max. 300 bar,
30 MPa, 85°C.|
- Included in delivery.
- Available accessories.
| | Order no.| Description|
---|---|---|---|---
KÄRCHER POWER NOZZLE
HP nozzle spray angle 0°
Power Nozzle 0°, 060| 29| 2.113-036.0| Solid jet for very stubborn dirt and
stains.|
Power nozzle spray angle 15°
Power Nozzle 15°, 060| 30| 2.113-048.0| Fan jet nozzle for stubborn dirt and
stains.|
Power nozzle spray angle 25°
Power Nozzle , 060| 31| 2.883-402.0| Flat stream large area coverage and
stubborn dirt and contaminations.|
32| 2.113-026.0| Fan jet nozzle for large-area coverage and stubborn dirt and
stains.|
NOZZLE UNION / SPACER
Nozzle union
Nozzle connector| 33| 5.401-210.0| For protecting and connecting Kircher power
nozzles to spray lances (M 18 × 1.5 IG).|
Nozzle screws| 34| 4.112-011.0| Nozzle screws with protectors for high-
pressure and power nozzles|
HIGH-PRESSURE HOSES
Standard
High-pressure hose, 20 m, DN 8, 315 bar, 1 × EASY! Lock / 1 × AVS-hose reel
connection| 35| 6.110-011.0| High-pressure hose with AVS hose reel connection
and EASY! Lock hand screw connection.|
Standard with unions on both sides
High-pressure hose, 10 m, DN 8, 315 bar, 2 × EASY! Lock| 36| 6.110-031.0| 10 m
high-pressure hose (M 22 × 1.5) with kink protection. With patented rotating
AVS trigger gun connector and manual coupling. Further data: DN 8/155°C/315
bar.|
High-pressure hose, 30 m, DN 8, 315 bar, 2 × EASY! Lock| 37| 6.110-014.0| With
rotary coupling, 2 × M 22 × 1.5|
High-pressure hose, 15 m, DN 10, 220 bar, 2 × EASY! Lock| 38| 6.110-042.0| 15
m high-pressure hose M 22 × 1.5) with kink protection and threaded couplings
at both ends. Further data: DN 10/155°C/220 bar.|
High-pressure hose, 20 m, DN 10, 220 bar, 2 × EASY! Lock| 39| 6.110-043.0|
with union on both sides, M 22 × 1.5 with anti-kink protection. NW
10/155°C/220 bar|
High-pressure hose, 25 m, DN 10, 220 bar, 2 × EASY! Lock| 40| 6.110-044.0|
High-pressure hose, 15 m, DN 12, 210 bar, 2 × EASY! Lock| 41| 6.110-059.0|
High-pressure hose for water volumes greater than 1,800 l / h. With union on
both sides. 2x M 22 × 1.5 with anti-kink protection.|
High-pressure hose, 40 m, DN 12, 210 bar, 2 × EASY! Lock| 42| 6.110-060.0|
- Included in delivery.
- Available accessories.
| | Order no.| Description|
---|---|---|---|---
HIGH-PRESSURE HOSES
Standard with unions on both sides
High-pressure hose, 10 m, DN 10, 220 bar, 2 × EASY! Lock| 43| 6.110-041.0| |
Long-life 400
High-pressure hose Long-life, 20 m, DN 8, 400 bar, 1 × EASY! Lock / 1 × AVS-
hose reel connection| 44| 6.110-028.0| 20 m high-pressure hose Long-life 400
(DN 8) with patented (rotating) AVS trigger gun connector and manual coupling.
Two layer high-strength steel wire reinforced.|
Longlife 400 with unions on both sides
High-pressure hose Long-life, 1,5 m, DN 8, 400 bar, 2 × EASY! Lock| 45|
6.110-024.0| 1.5 m high-pressure hose (DN 8, M 22 × 1.5) with kink protection
and connectors at both ends. For connecting to hose reels with appropriate
connector (M 22 × 1.5).|
High-pressure hose Long-life, 1,5 m, DN 8, 400 bar, 1 × EASY! Lock / 1 × M22 ×
1.5| 46| 6.110-069.0| High-pressure hose (ID 8) with double steel
reinforcement, 1.5 m long, suitable for up to 400 bar pressure. Connectors: M
22 × 1.5, quick and convenient EASY! Lock hand screw connection.|
High-pressure hose Long-life, 1,5 m, DN 8, 400
bar, 2 × M22 × 1.5
| 47| 6.390-178.0| 1.5 m high-pressure hose (DN 8, M 22 × 1.5) with kink
protection and connectors at both ends. For connecting to hose reels with
appropriate connector (M 22 × 1.5).|
High-pressure hose Long-life, 10 m, DN 8, 400 bar, 2 × EASY! Lock| 48|
6.110-038.0| Durable, 10 m long high-pressure hose (ID 8) with double steel
reinforcement and EASY!Lock hand screw connection at both ends and ANTI!Twist.
Approved for 400 bar pressure.|
High-pressure hose Long-life, 10 m, DN 8, 400
bar, 2 × M22 × 1.5
| 49| 6.388-083.0| 10 m high-pressure hose Long-life 400 (DN 8) with rotary
coupling, two layer high-strength steel wire reinforced. Connectors at both
ends. M 22 × 1.5, with kink protection.|
High-pressure hose Long-life, 30 m, DN 8, 400 bar, 2 × EASY! Lock| 50|
6.110-023.0| With rotary coupling, 2 × M 22 × 1.5|
High-pressure hose Long-life, 20 m, DN 8, 400 bar, 2 × EASY! Lock| 51|
6.110-027.0| with rotary coupling, 2 × M 22 × 1.5|
High-pressure hose Long-life, 15 m, DN 8, 400 bar, 2 × EASY! Lock| 52|
6.110-029.0| With rotary coupling, 2 × M 22 × 1.5|
Food industry version with unions on both sides
High-pressure hose food grade, 10 m, DN 8, 250 bar, 2 × EASY!Lock| 53|
6.110-051.0| 10 m high-pressure hose (DN 8) with patented (rotating) AVS
trigger gun connector.
Non-discoloring outer layer for use in the food industry. M 22 × 1.5 with
anti-kink sleeve.|
High-pressure hose food grade, 20 m, DN 8, 250 bar, 2 × EASY!Lock| 54|
6.110-052.0| 20 m high-pressure hose (DN 8) with swivel coupling. Non-
discoloring outer layer for use in the food industry. Connectors at both ends,
M 22 × 1.5, with kink protection. NW 8/155°C/250 bar.|
Longlife food industry version
High-pressure hose food grade, 20 m, DN 8, 400 bar, 1 × EASY! Lock / 1 × AVS-
hose reel connection| 55| 6.110-075.0| |
Long-life food industry version with unions on both sides
High-pressure hose food grade, 10 m, DN 8, 400 bar, 2 × M22 × 1.5| 56|
6.391-864.0| Long-life HP hose for use in the food industry. Außendeckeanimal-grease-resistant, non-colour-bleeding material. With rotary coupling, 2
× M 22 × 1,5|
- Available
| | Order no.| Description|
---|---|---|---|---
HIGH-PRESSURE HOSES
Long-life food industry version with unions on both sides
High-pressure hose food grade Long-life, 10 m, DN 8, 400 bar, 2 × EASY! Lock|
57| 6.110-053.0| With blue, non-marking and animal fat resistant outer
covering: durable high-pressure hose (ID 8), 10 m long, ANTI! Twist and EASY!
Lock hand screw connection at both ends.|
High-pressure hose food grade Long-life, 20 m, DN 8, 400 bar, 2 × EASY! Lock|
58| 6.110-054.0| Long-life HP hose for use in the food industry. Außendeckeanimal-grease-resistant, non-colour-bleeding material. With patented AVS
connection in the pistol (pivot mounted)|
PIPE CLEANING
Pipe cleaning hose, ID 6
Hose assembly TR pipe cleaning DN6 max.2| 59| 6.110-046.0| The 10 m pipe
cleaning hose is a highly flexible high pressure hose for pipe interior
cleaning (threaded connection for nozzle R 1/8).|
Pipe cleaning hose, DN 6, 20 m, 220 bar| 60| 6.110-008.0| 20 m flexible high-
pressure hose (DN 6) for cleaning pipes up to 220 bar (threaded connection for
R 1/8 nozzle).|
Hose assembly TR pipe cleaning DN6 max.2| 61| 6.110-047.0| The 30 m pipe
cleaning hose is a highly flexible high pressure hose for pipe interior
cleaning (threaded connection for nozzle R 1/8).|
FLOOR AND HARD SURFACE CLEANER
Hard surface cleaner FR 30 ME
FR 30 ME surface cleaner| 62| 2.111-013.0| Hot water resistant stainless steel
surface cleaner with double ceramic bearings, non-marking swivel castors and
suction hose connection. Ideal for indoor cleaning, e.g. food industry.|
Hard Surface Cleaner FR 50
FR 50 surface cleaner| 63| 2.111-023.0| Hot water resistant stainless steel
surface cleaner with 500 mm working width. Ideal for large areas. With double
ceramic bearings, push handle, non-marking swivel castors and detergent dosing
system.|
Machine-specific nozzle kit for FR
Nozzle kit for FR, 850 l/h – 1100 l/h| 64| 2.640-442.0| Nozzle kit includes
power nozzles and unions. For Kircher surface cleaners (850 to 1100 l/h).|
Machine-specific nozzle kits for FRV
Nozzle kit for FRV, 050| 65| 2.642-433.0| Machine-specific nozzle kit with
Kircher power nozzles and jet nozzle for FRV 30.|
Nozzle kit for FRV, 080| 66| 2.642-982.0|
Hard surface cleaner FRV 30 Me
Extension hose FRV 30 Me and FRV 50 Me| 67| 4.441-040.0| 5 m extension hose
for FRV 30 Me. Includes connecting adapter.|
FRV 30 Me Surface Cleaner| 68| 2.111-012.0| Thanks to automatic suction of the
dirty water, the stainless steel FRV 30 Me Surface Cleaner makes surface
cleaning more efficient in both inside and outside areas. Hot water cleaning
up to 85°C.|
FOAM SYSTEMS
Cup foam lance
Cup foam lance Basic 3, 900 l/h – 2500 l/h| 69| 4.112-055.0| For high-pressure
cleaners with a flow rate of 900–2500 l/h: new, robust and very high-quality
foam cup lance with outstanding foam quality while consuming half as much
cleaning agent.|
1-litre cleaning agent container for cup foam lance basic| 70| 5.071-414.0| |
- Available
| | Order no.| Description|
---|---|---|---|---
FOAM SYSTEMS
Cup foam lance
1-litre cleaning agent container for cup foam lance advanced| 71| 6.414-050.0|
Additional 1-litre cleaning agent container for quick replacement of the
cleaning agent (for foam lance 2.112-017.0 and 2.112-018.0).|
Cup foam lance Advanced 3, 900 l/h – 2500 l/h| 72| 4.112-065.0| |
Cup foam lance DUO Advanced 3, 900 l/h – 2500 l/h| 73| 4.112-069.0|
Inno Foam Set
Innofoam kit with detergent injector| 74| 2.112-000.0| High-pressure foam
system with double lance (foam nozzle and high-pressure jet for rinsing). For
use with mobile and stationary high-pressure and HDS pressure cleaners for
cleaning or disinfection.|
Easy Foam Set
Easy Foam Set with RM injector| 75| 2.112-010.0| HP foam system for use with.
HD/HDS units for cleaning and disinfecting. Foam nozzle for connection to
lance and HP chemical injector with precision 0-5% metering valve. The machine
specific nozzle kit has to be ordered separately.|
Easy foam set| 76| 2.112-011.0|
Nozzle kits for Inno/Easy Foam Set
Nozzle kit 090 Inno/Easy kit 700 – 1000 l/h| 77| 2.111-019.0| Nozzle kit
contains Kircher power nozzles and nozzle inserts. For Inno/Easy-Foam set
700-1000 l/h. For optimal foam system performance.|
Foam nozzle mounting kit
Foam nozzle kit| 78| 2.112-013.0| Foaming agent kit. The foam nozzle is ideal
for use in sanitary areas and the food industry and wherever long application
times are necessary.|
MIXERS AND INJECTORS
HP detergent injector
Detergent injector for high and low pressure (without nozzles)| 79|
4.637-032.0| Detergent injector for independent high and low pressure dosage.
Maximum dosage about 15%.|
Detergent injector for high pressure| 80| 4.637-033.0| Cleaning agent dosage
at high pressure 3 – 5 %|
Machine-specific nozzle kit with order no. 3.637-170
Nozzle insert trapezoidal thread HDS-GER| 81| 4.769-011.0| For HD/HDS 750 –
1000 l/h. Consists of nozzle insert + HP power nozzle + union|
Nozzle insert with order no. 3.637-001
Nozzle insert for Order No. 3.637-001, high-pressure for machines up to 1100
l/h.| 82| 4.769-003.0| Nozzle insert for detergent injector 3.637-001 for
high-pressure detergent application. For high-pressure cleaners with a water
flow rate up to 1100 l/h.|
Low pressure for units rated up to 1100 l/h| 83| 4.769-001.0| For low pressure
with machines up to 1.100 l/h|
QUICK CONNECT
Quick coupling| 84| 6.401-458.0| For quick change of different spray lances
and accessories. Optimum adaption to Kircher accessories, especially for
connection between trigger gun and spray lance. With M22 × 1,5 female.|
- Available
| | Order no.| Description|
---|---|---|---|---
QUICK CONNECT
Plug nipple| 85| 6.401-459.0| Hardened stainless steel nipple for quick
coupling 6.401-458. With M22 × 1,5 male.|
Quick-fitting pipe union coupler trapezo| 86| 2.115-000.0| For fast changes
between different spray lances/accessories. Perfect for Kircher spray unit,
suitable for trigger gun/spray lance interface. With M 22 × 1.5 internal
thread.|
Quick-fitting pipe union plug nipple tra| 87| 2.115-001.0| Hardened stainless
steel male coupling for quick coupling 2.115-000. With M 22 × 1.5 external
thread.|
DRUM AND TANK CLEANING
Add-on kit mud sucker| 88| 2.641-798.0| |
OTHER HP ACCESSORIES
Jet gun| 89| 2.869-067.0| Short set-up time, easy transport, instant switch
off – the jet gun is the affordable cleaning method for all kinds of small to
medium-sized areas. Adjustable pressure/water volume.|
TAKE-OFF POINT EQUIPMENT
Hose and spray lance holder VA| 90| 2.042-003.0| Hose and spray lance wall
holder for practical and safe storage of high-pressure hoses or spray lances.
Stainless steel wall holder.|
REMOTE CONTROL
Remote control| 91| 2.637-491.0| Easy to use remote control for stationary
high-pressure cleaners. With rocker switch, ISO housing for wall mounting and
fixing material.|
Remote control I-O, hot/cold, detergent 1-2| 92| 2.744-008.0| Remote control
with switches, housing and fixing material for wall mounting. Functions:
On/Off, hot/cold water and detergent stage 1/stage 2.|
Multiple op. control, I-O, hot-cold, 1-2| 93| 2.744-011.0| w. I-O, hot-cold,
1-2|
Priority switch| 94| 2.638-200.0| |
Coin acceptor, 50 cents| 95| 2.639-912.0|
Coin acceptor, 1 €| 96| 2.639-913.0|
Coin acceptor, 2 €| 97| 2.639-914.0|
Coin acceptor, tokens| 98| 6.768-063.0| Token|
- Available
| | Order no.| Description|
---|---|---|---|---
REMOTE CONTROL
Multiple coin remote control without coin acceptor| 99| 2.642-422.0| |
CONTROL CABLE
Control cable 3x 1.5 mm2 (price per meter)| 100| 6.641-059.0| Connecting cable
3 × 1.5 mm². Available by the meter.|
Control cable 7 × 1.5 m| 101| 6.641-064.0| |
Control cable 10 × 1.5 m| 102| 6.641-082.0|
Conduit| 103| 2.420-008.0| Conduit for control cable installation. Consisting
of 3 m conduit, 5x conduit clips, 5x dowels, 5x screws.|
Control cable| 104| 6.647-222.0| Connection cable available as bulk stock (12
× 1.0 mm²) for use as control cable. For all stationary HD/HDS machines from
Kircher.|
HIGH-PRESSURE PIPEWORK
Connector, galvanised steel| 105| 2.638-180.0| Alternative : stainless steel
2.638-181|
Shut-off valve, galvanised steel| 106| 4.580-144.0| Shut-off valve, galvanised
steel. Connects between high-pressure pipe system and high-pressure hose.
Connectors: 1x M22 × 1.5 and 1x M24 × 1.5. With wall mounting plate and fixing
material.|
Pipe kit, galvanised steel, 3 m| 107| 2.420-004.0| High-pressure pipe kit with
3 m galvanised steel pipe Ø 16 × 2.5 mm, DN 11 and fixing accessories:
Compression fitting, 4 pipe clamps, 4 hanger bolts and 4 plastic dowels.|
Tee, galvanised steel| 108| 6.386-269.0| Tee (90°), galvanised steel with
compression fitting for 16 mm pipes. Fixing material (Ermelo) included.|
Elbow union, galvanised steel| 109| 6.386-356.0| Elbow union, galvanised
steel. With 90° angle piece with compression fitting (Ermelo) at both ends for
16 mm pipes.|
Pipe insulation, per running meter| 110| 6.286-147.0| For thermal insulation
of pipes. Pipe cladding. Wall thickness 9 mm. PE foam with moisture barrier.
Available per running meter.|
Adapter piece, galvanised steel| 111| 2.638-182.0| Alternative: stainless
steel 2.638-183|
Quick-release coupling, fixed part| 112| 6.463-025.0| fixed part|
- Available
| | Order no.| Description|
---|---|---|---|---
HIGH-PRESSURE PIPEWORK
Union nut, galvanised steel| 113| 6.386-423.0| Union nut, galvanised steel.
For 16 mm compression fitting.|
Cutting ring| 114| 6.386-357.0| Galvanised steel cutting ring. For 16 mm
compression fitting.|
High-pressure pipe kit| 115| 2.420-006.0| High-pressure pipe kit with 3 m
stainless pipe Ø 16 × 2 mm, ID 12 and mounting accessories: compression
fitting, 4 pipe clamps, 4 hanger bolts and 4 plastic dowels.|
Connector pipe/high-pressure hose, stainless steel| 116| 2.638-181.0|
Stainless steel|
Connector pipe/stop valve, stainless steel| 117| 2.638-183.0| |
Shut-off valve, stainless steel| 118| 4.580-163.0|
119| 6.386-428.0| (VA)|
Union nut, stainless steel| 120| 6.386-465.0| Stainless steel|
Stainless steel elbow union 90°| 121| 6.386-466.0| Stainless steel elbow union
90° with compression fitting (Ermelo) at both ends for 16 mm pipes.|
PLANT INSTALLATION
Wall bracket| 122| 2.053-005.0| Wall bracket|
Water supply hose, 1.5 m: DN 13| 123| 6.389-145.0| |
Kit 1 detergent| 124| 2.637-779.0| For detergent changeover per remote control
for stationary HS high-pressure cleaners. Includes level sensor, solenoid
valve and dosing valve. Remote control required for operation.|
HOSE TRACK SYSTEM HIGH-PRESSURE CLEANERS
C-rail, per running meter| 125| 6.233-017.0| C-rail profile as a guide track.
30×32 mm, 2 mm wall thickness 1.56 kg/m. Available per running meter.|
Rail connector| 126| 6.541-011.0| |
- Available
| | Order no.| Description|
---|---|---|---|---
HOSE TRACK SYSTEM HIGH-PRESSURE CLEANERS
End stop| 127| 6.541-025.0| |
Cable trolley| 128| 6.541-026.0| Cable trolley for C-rail profile. 20 kg
capacity. Weight 0.11 kg. Galvanised steel ball bearing.|
End bracket| 129| 6.541-028.0| |
Handle| 130| 6.541-029.0| C-rail profile clamp. Galvanised steel. Plastic
clamping parts. Weight 0.06 kg.|
Wall bracket| 131| 6.541-039.0| Wall holder for galvanised steel C-rail
profile.|
Rail holder wall| 132| 6.541-012.0| Galvanised steel rail bracket for C-rail
profile. Weight 0.235 kg.|
Spray lance runner, movable| 133| 4.042-610.0| moveable|
Rail holder| 134| 6.541-027.0| |
FLUE PIPE
Flue gas adapter| 135| 4.656-149.0| Flue gas adapter with draught damper for
flue pipe connection (adapter for HDS burners for connection to a stack
system).|
FUEL SUPPLY
Hose kit, fuel oil| 136| 2.440-001.0| Fuel hose kit for stationary HDS
cleaning systems. Contents: 2 fuel oil hoses (DN 4, 1m) for flow and return, 2
galvanised steel compression fittings.|
Fuel oil filter| 137| 4.730-033.0| Fuel oil filter with sight-glass for wall
mounting. Flow shut-off device. Connection on burner side: M 12 × 1.5 for
compression fitting union; Connection on supply side: 3/8″ IG. Fixing material
included.|
Heating oil tank, 700 l| 138| 6.392-071.0| 700 l|
Suction pipeline, heating oil| 139| 4.421-068.0| |
COUPLING PARTS
Rotary coupling
Rotary coupling| 140| 4.111-021.0| Kircher rotary coupling prevents twisting
and kinking of high-pressure hoses for ease of use. Connector Easy! Lock. With
grip protection.|
- Available
| | Order no.| Description|
---|---|---|---|---
COUPLING PARTS
Coupling
Coupler -2xM22x1,5| 141| 4.403-002.0| Brass double connector for connecting
and extending high-pressure hoses. With rubber protection. Connector: 2x M 22
× 1.5 m.|
Connector
Nozzle connector/screw connector| 142| 4.111-022.0| Nozzle connector/screw
connector for connecting high-pressure nozzles and accessories to the high-
pressure trigger gun (with nozzle connector). Connectors: 1x M 22 × 1.5 and 1x
M 18 × 1.5.|
Short spray unit| 143| 4.111-038.0| For attaching high-pressure nozzles and
accessory parts to HP trigger gun (with nozzle screws). Not compatible with
triple nozzles.|
Adapter EASY!Lock
Adapter 1 M22AG-TR22AG| 144| 4.111-029.0| Adapter 1 to connect the old hose
with the new hose|
Adapter 2 M22IG-TR22AG| 145| 4.111-030.0| Adapter 2 to connect the old device
with the new hose and the old gun with the new hose|
Adapter 3 M22IG-TR22AG| 146| 4.111-031.0| Adapter 3 to connect the old gun
with the new spray lance and new servo regulator|
Adapter M22 – Swivel| 147| 4.111-032.0| M22 × 1,5female and swivel connection.
For extension of high-pressure hoses with AVS connection or for usage of the
telescopic lance with a high-pressure hose with AVS connection.|
Adapter 5 TR22IG-M22AG| 148| 4.111-033.0| Adapter 5 to connect the new gun
with the old spray lance and new servo regulator with the old spray lance|
Adapter 6 TR22IG-M22AG| 149| 4.111-034.0| Adapter 6 to connect the new device
with the old hose and the old hose with the new gun|
Adapter 7 M18IG-TR20AG| 150| 4.111-035.0| Adapter 7 to connect the old spray
lance with the new nozzle|
Adapter 8 TR20IG-M18AG| 151| 4.111-036.0| Adapter 8 to connect the new spray
lance with the old nozzle|
Coupler -2xM22x1,5| 152| 4.111-037.0| Brass double connector for connecting
and extending high-pressure hoses. With rubber protection. Connector: 2x M 22
× 1.5 m.|
ADAPTER for replacement TR22IG-M22AG Er| 153| 4.111-046.0| Rotatable adapter
for connecting EASY! Force high-pressure gun and high-pressure hoses with M
22×1.5 connection|
HOSE REELS
Automatic, self-winding hose reels
Automatic plastic hose reel incl. high-pressure hose, 15 m| 154| 2.639-257.0|
|
- Available
| | Order no.| Description|
---|---|---|---|---
HOSE REELS
Automatic, self-winding hose reels
Automatic hose reel, powder-coated steel / plastic, 20 m| 155| 6.392-074.0|
Automatic hose reel for 20 m high-pressure hose. The console is made from
powder-coated steel, the drum is made from plastic.|
Automatic stainless steel / synthetic material hose drum, 20 m| 156|
6.392-083.0| Automatic hose reel for 20 m high-pressure hose. The console
consists of stainless steel, the drum is made from plastic.|
Automatic hose reel, coated, 20 m| 157| 6.392-106.0| Automatic hose reel of
durable plastic. Painted steel bracket. Suitable for 20 m high-pressure hose.|
Hose reel, automatic, basalt grey-coated, 20 m| 158| 6.392-105.0| Automatic
hose reels provide the highest level of safety and convenience for winding and
unwinding HP hoses.|
Automatic hose reel, stainless steel, includes swivel holder, 20 m| 159|
6.392-076.0| Automatic stainless steel hose reel. With swivel holder. Suitable
for 20 m high-pressure hose.|
Automatic stainless steel hose reel, 40 m| 160| 6.392-442.0| Automatic hose
reels provide the highest level of safety and convenience for winding and
unwinding HP hoses. Compatible high-pressure hose, e.g. order no. 6.110-076.0
(ID 8, 40 m, 400 bar, 1x hose reel connection attachment kit).|
Powder-coated swivel holder| 161| 2.639-931.0| Swivel holder for automatic
hose reel wall mounting. For maximum action radius and flexibility of high-
pressure hose. Rotatable 120°. Galvanised steel.|
Stainless steel swivel holder| 162| 2.641-867.0| Swivelling wall bracket made
of high-grade steel (for 2.641-866). This makes maximum flexibility and
convenience possible when working with the HP hose.|
FACADE AND SOLAR PANEL CLEANING
Brushes
Drive for roller brush 500| 163| 4.762-584.0| Hydraulic drive for rotating
roller brushes. For cleaning façades or solar power installations with our
professional high-pressure cleaners. Installation on spray lance or telescopic
lance.|
Splash guard for roller brush 500| 164| 4.762-621.0| Splash guard with velcro
fastening for rotating roller brush. Clear view of the brush thanks to
transparent film, with protection against splashes at the same time.|
Roller brush 500 soft| 165| 4.762-623.0| Soft brush attachment for use with
hydraulic drive (4.762-584.0). Ideal for glass and solar power installation
cleaning. Easy quick-change system and secure mounting on drive.|
Roller brush 500 medium| 166| 4.762-624.0| Medium-hard brush attachment for
use with hydraulic drive (4.762-584.0). Suitable for sensitive façades, foils
and fabrics. Easy and safe quick-change system.|
Roller brush 500 hard| 167| 4.762-625.0| Hard brush attachment for use with
hydraulic drive (4.762-584.0). For rough façades, stone and wooden patios.
Safe and easy quick-change system.|
Brush hard| 168| 6.960-133.0| Brush with hard bristles for cleaning industry
facades and floor coverings and removing coarse dirt. Simple installation on
telescopic lances or high-pressure lances from Kircher.|
- Available
| | Order no.| Description|
---|---|---|---|---
FACADE AND SOLAR PANEL CLEANING
Brushes
Brush medium| 169| 6.960-134.0| Optimally cleans facades, roller shutters and
textile fabrics: the brush with medium-hard bristles for fast and simple
attachment to telescopic lances or high-pressure lances from Kircher.|
Brush soft| 170| 6.960-135.0| For simple installation on telescopic lances or
high-pressure lances from Kircher: brush with soft bristles for deep cleaning
of sensitive surfaces such as glass or solar systems.|
Telescopic
TL low pressure adapter| 171| 4.580-097.0| TL low-pressure adapter comprising
ball valve for tool-free installation on telescopic lances. Ideal for
applications with rotating high-pressure brushes.|
Telescopic lance TL 7 F| 172| 4.762-609.0| Telescopic lance TL 7 F with up to
7 m reach made from robust and lightweight glass fibre. With practical quick-
release fasteners for simple retraction and extension.|
Telescopic lance TL 7 H| 173| 4.762-610.0| Multifunctional hybrid telescopic
lance TL 7 H made of rigid and lightweight carbon-glass fibre mix. Telescopic
thanks to quick-release fastenings. Up to 7 m reach.|
Telescopic lance TL 10 H| 174| 4.762-611.0| Up to 10 m reach: hybrid
telescopic lance TL 10 H. Comprising carbon-glass fibre mix and suitable for
multifunctional use. Simple retraction and extension thanks to quick-release
fasteners.|
Telescopic lance TL 10 C| 175| 4.762-612.0| Carbon fibre telescopic lance TL
10 C. With up to 10 m reach and practical quick-release fasteners.
Multifunctional use for cleaning facades, windows or solar panels.|
Telescopic lance TL 14 C| 176| 4.762-613.0| Maximum rigidity with minimum
weight: telescopic lance TL 14 C made from carbon fibre. Enormous reach of 14
m, multifunctional use and easy to use thanks to quick-release fasteners.|
TL high pressure adapter| 177| 4.775-154.0| TL high-pressure adapter, flexible
high-pressure gun for high-pressure cleaning with telescopic lances.
Ergonomic, easy to install, suitable for right- and left-handed individuals.|
WET BLASTING ATTACHMENT
Wet blasting attachment (without nozzle)
Wet blasting attachment with flow control (without nozzles)| 178| 4.115-000.0|
Paint, rust and scale removal made easy: Kircher wet blasting attachment with
flow control for adding blasting abrasive to the high-pressure jet.|
Wet blasting attachment without flow control (nozzles not included)| 179|
4.115-006.0| Paint, rust and scale removal made easy: Kircher wet blasting
attachment with flow control for adding blasting abrasive to the high-pressure
jet. Without flow control.|
Nozzle pack for wet blasting attachment
Nozzle pack TR wet jet set 0060| 180| 2.112-025.0| Consisting of wet jet
nozzle and nozzle insert – only for use in combination with wet jet unit
4.115-000.0 | 4.115-006.0.|
Boron carbide nozzle
Boron carbide nozzle, for machines as of 1000 l/h| 181| 6.415-084.0| In
addition to nozzle packs. Very wear-resistant nozzle with boron carbide chuck
for continuous-duty operation.|
DRUM AND TANK CLEANING
HKF 50 spray head, brass
HKF 50 spray head , brass| 182| 3.631-039.0| Interior cleaning head for
barrels and containers with bungholes of 50 mm and more.|
- Available
| | Order no.| Description|
---|---|---|---|---
DRUM AND TANK CLEANING
HKF 50 spray head, brass
HKF 50 spray head, brass| 183| 3.631-058.0| Interior cleaning head for barrels
and containers with bungholes of 50 mm and more.|
WATER CONNECTION
Geka coupling
Hose coupling| 184| 6.388-458.0| with female thread|
Water supply hose
Water supply hose| 185| 4.440-038.0| NW 13 R1″ / R 3/4″, up to 30 °C|
Backflow check valve
Backflow preventer| 186| 2.641-374.0| To prevent detergent getting into the
drinking water cycle in case of inlet at low-pressure. – hot water resistant
up to 80 °C – tested according to IEC 60335-2-79 – integrated leakage
protection|
WASHING BRUSHES
Push-on washing brush
Push-on washing brush| 187| 4.762-497.0| With clamp for mounting directly to
units’ double or triple nozzle. Fits on new double and triple nozzles.|
Push-on wash brush, M 18 × 1.5| 188| 4.113-001.0| Push-on wash brush for
universal use. Simply push on to lance. Connector: M 18 × 1.6.|
Rotating washing brush
Rotating wash brush for > 800 l/h machines, nylon bristles| 189| 4.113-002.0|
Driven by water stream. Gently removes fine dust and traffic film from any
surface. Temperature resistant up to 60°C, M 18 × 1.5 (replaceable brush
insert).|
Rotating wash brush for > 800 l/h machines, natural bristles| 190|
4.113-005.0|
STATIONARY HIGH-PRESSURE CLEANING SYSTEMS
Water solenoid valve| 191| 4.743-011.0| |
Water hose; 1.5 m: DN 13, R 3/4″| 192| 4.440-282.0|
STATIONARY HIGH-PRESSURE CLEANERS
Hand trigger gun| 193| 4.775-784.0| Easy Press trigger gun, grey.|
SELF SERVICE WASHING SYSTEMS AND EQUIPMENT
Wash bay equipment
Swivelling boom 360° for high-pressure tool| 194| 4.058-106.0| Swivelling boom
for HP-working hose (360° turning circle). Mounted above the washing bay.|
Tokens
Set of tokens, stamping| 195| 6.768-169.0| Set of tokens, stamped|
Miscellaneous
Swinging boom 180°, wall-mounted| 196| 2.637-120.0| |
- Available
HDS 9/14-4 ST, 1.698-917.0, 2023-09-05