K RCHER SC 3 EasyFix Steam Cleaner Instruction Manual

K RCHER SC 3 EasyFix Steam Cleaner

Specifications

• Model: SC 3 EasyFix
• Language Options: Deutsch, English, Italiano, Nederlands, Svenska, Suomi, Norsk, Dansk, Eesti, Latviesu, Lietuviskai, Polski, Magyar, estina, Slovenina, Slovensina, Hrvatski, Srpski
• Product Code: 59679020

Initial Setup

1. Unpack the product and ensure all components are included.
2. Read the user manual carefully to understand the product features.

Operating Instructions

1. Fill the water tank with water.
2. Plug in the power cord and switch the device on using the power switch.
3. Adjust the steam level using the steam control lever.

Cleaning Instructions

1. For textile refreshment, use the provided accessories as per instructions.
2. For glass cleaning, follow the guidelines provided in the manual.

Maintenance

1. Regularly empty the water tank after each use to prevent scale buildup.
2. Replace the descaling cartridge as indicated by the warning lights.

Frequently Asked Questions (FAQ)
Q: What should I do if there is no steam despite having enough water in the tank?
A: Check if the descaling cartridge is correctly inserted. If not, insert it properly to restore steam functionality.

General notes

Read these original operating instructions and the enclosed safety instructions before using the device for the first time. Proceed accordingly.
Keep both books for future reference or for future owners.

Intended use

Only use the appliance in private households. The ap-pliance is intended for cleaning with steam and can be used with appropriate accessories as described in these operating instructions. Detergents are not required. Observe the safety instructions.

Environmental protection

The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations.
Electrical and electronic devices contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which – if handled or disposed of incorrectly – can pose a potential danger to human health and the envi-ronment. However, these components are required for the correct operation of the device. Devices marked by this symbol are not allowed to be disposed of together with household rubbish.

Notes on the content materials (REACH)
Current information on content materials can be found at: www.kaercher.de/REACH

Accessories and spare parts

Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely.
Information on accessories and spare parts can be found at www.kaercher.com.

Scope of delivery

The scope of delivery for the appliance is shown on the packaging. Check the contents for completeness when unpacking. If any accessories are missing or in the event of any shipping damage, please notify your dealer.

Warranty

The warranty conditions issued by our sales company apply in all countries. We shall remedy possible malfunctions on your device within the warranty period free of cost, provided that a material or manufacturing defect is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site.
(See overleaf for the address)

Safety devices

CAUTION
Missing or modified safety devices
Safety devices are provided for your own protection. Never modify or bypass safety devices.

Symbols on the device

(according to type of appliance)

Pressure controller

In case of inadmissibly high pressure in the event of a fault, a safety valve relieves the pressure into the atmosphere.

Fuse

The fuse prevents the device from overheating. If the device overheats, the fuse disconnects the device from the power supply.
Before re-commissioning the device, contact the responsible KÄRCHER Customer Service.

Description of the unit

The maximum amount of equipment is described in these operating instructions. Depending on the model used, there are differences in the scope of delivery (see packaging).

For the illustrations, refer to the graphics page. Illustration A

1. Decalcification cartridge
2. Filling hole for water
3. Carrying handle
4. Holder for accessories
5. Display
6. Indicator light (green) – mains voltage present
7. Indicator light (red) – water shortage
8. Indicator light (red) – replace decalcification cartridge.
9. RESET button – set water hardness.
10. Switch – On
11. Switch – Off
12. Park bracket for floor nozzle
13. Mains connection cable with mains plug
14. Non-driven wheels (2 x)
15. Steering roller
16. Steam gun
17. Steam lever
18. Unlocking button
19. Selector switch for steam volume (child lock) 20
20. Steam hose
21. Spotlight nozzle
22. Round brush (small, black)
23. Round brush (small, yellow)
24. Power nozzle
25. Round brush (large)
26. Manual nozzle
27. Microfibre cover for manual nozzle
28. Extension tubes (2 x)
29. Unlocking button
30. Floor nozzle
31. Hook and loop fastener
32. Microfibre floor cloth (1 x)
33.  Microfibre floor cloth (2 x)
34. Carpet glider

optional

Initial start-up
ATTENTION

Device damage due to calcification
The decalcification cartridge only works properly if you adjust the device to the local water hardness before operating it for the first time.
Set the device to the local water hardness.
Set the device to the current water hardness before using it in an area with a different water hardness (e.g. after a move)

1. Insert the decalcification cartridge into the opening and push it so that it is firmly in place.
   Illustration C

2. Set the water hardness, see chapter Setting the water hardness.

Installation

Installing accessories

1. Insert and engage the steering roller and non-driven wheels.
   Illustration B

2. Push the open end of the accessory onto the steam gun so that the unlocking button on the steam gun engages.
   Illustration H
   

3. Push the open end of the accessory onto the spotlight nozzle.
   Illustration I

4. Connect the extension tubes with the steam gun.

   • Push the 1st Push the first extension tube onto the steam gun so that the unlocking button on the steam gun engages.
     The connection pipe is connected.

   • Push the 2nd extension tube onto the 1st extension tube.
     The connection pipes are connected.
     Illustration J

5. Push the accessory and / or the floor nozzle onto the free end of the extension tube.
   Illustration K
   The accessory is connected.

Disconnecting accessories

1. Set the selector switch for the steam volume to the rear.
   The steam lever is locked.

2. Push the unlocking button and pull the parts apart.
   Illustration N

Operation
Filling water
The water reservoir can be filled at any time.

ATTENTION
Damage to the device
Unsuitable water can block the nozzles or damage the water level indicator.

• Do not use condensation from the clothes dryer for filling.
• Do not use collected rainwater for filling.
• Do not use cleaning agents or other additives (e.g. scents) for filling.

1. Fill the water reservoir with a maximum of 1 l of tap water.
   Illustration D

Switch on the device
ATTENTION
Device damage due to incorrectly set water hardness
The decalcification cartridge only works properly if the device is adjusted to the local water hardness. The device may calcify if the water hardness is set incorrectly.
Adjust the device to the local water hardness before first operation, see chapter Setting the water hardness.

Note
When steaming for the first time after removing and reinserting the decalcification cartridge, the steam jet may be weak or irregular, and individual drops of water may be expelled. The device requires a short running-in period in which the decalcification cartridge fills with water.
The steam volume that is expelled increases constantly
until the maximum steam volume has been reached after approx. 30 seconds.

1. Place the device on a firm surface.

2. Connect the mains plug into a socket to a socket.

   • Press the On switch.
     Illustration E
     

3. The green indicator light lights up.
   The device is ready for use after approximately 30 seconds.
   Illustration F

Regulating the steam volume
The expelled steam volume is regulated using the selector switch for steam volume. The selector switch has 3 positions:

1. Set the selector switch for the steam volume to the required steam volume.
2. Press the steam lever.
3. Before starting cleaning, point the steam gun at a cloth until steam is expelled evenly.

Topping up the water

If there is a water shortage, the red water shortage indicator light lights up constantly.
For constant steam output, the water has to be topped up through the cover of the decalcification cartridge. When topping up the water, the decalcification cartridge remains secured in the device.

Note
The device is equipped with dry-run protection for the pump. If the pump runs dry for a longer period, e.g. because the decalcification cartridge is not correctly in-serted, the pump switches off and the red water shortage indicator light flashes.
To be able to operate the device again, the device has to be switched off and back on again. In the process, you must make sure that the cartridge has been insert-ed correctly and there is enough water in the water res-ervoir.

1. Fill the water reservoir with a maximum of 1 l of tap water through the cover of the decalcification cartridge.
   The red water shortage indicator light goes out.

Interrupting operation
In order to save energy, we recommend that you switch off the device for breaks in operation of longer than 20 minutes.

1. Press the Off switch.

Switching off the device

1. Press the Off switch.
   Illustration O
   The device has been switched off.

2. Press the steam lever until no more steam flows out.
   Illustration P
   The steam boiler is depressurised.

3. Set the child lock (selector switch for steam volume) to the rear.
   The steam lever is locked.

4. Pull the mains plug from the socket.
   ATTENTION
   Device damage due to water putrefaction
   If the device is not put into operation for more than 2 months, the water in the reservoir may putrefy.
   Drain the water reservoir before breaks in operation.

5.  Drain the water reservoir.
   Illustration S

Storing the device

1. Connect the extension tubes to the large mounts for accessories.

2. Connect a manual nozzle and spotlight nozzle to each extension tube.

3. Fasten the large round brush to the spotlight nozzle.

4. Connect the small round brush and nozzles to the medium-sized mount for accessories.

5. Hang the floor nozzle in the park bracket.
   Illustration Q
   

6. Wind the steam hose around the extension tube and connect the steam gun to the floor nozzle.
   Illustration R
   

7. Wind the mains cable around the extension tube.

8. Store the device in a dry location that is protected from frost.

Important application instructions

Cleaning the floor areas
We recommend sweeping the floor or vacuum cleaning
it before using the appliance. In this way the floor will be cleared of dirt and loose particles before the wet cleaning.

Freshening up textiles
Prior to using the appliance, always check the compatibility of the textiles at a concealed point: Steam down the textile, allow it to dry and then check it for any change in colour or shape.

Cleaning coated or painted surfaces

ATTENTION
Damaged surfaces
Steam can loosen wax, furniture polish, plastic coatings or paint and edge band from edges.

• Do not direct the steam at glued laminated edges as the edge band may loosen.
• Do not use the appliance for cleaning unsealed wood or parquet floors.
• Do not use the appliance for cleaning painted or plastic-coated surfaces such as kitchen or living room furniture, doors or parquet.

1. To clean these surfaces, steam a cloth briefly anduse it to wipe over the surfaces.

Glass cleaner

ATTENTION
Glass breakages and damaged surfaces Steam can damage sealed points of the window frame and, at low outside temperatures, lead to tension on the surface of window panes and hence to glass breakages.
Do not direct the steam at sealed points on the window frame.
At low outside temperatures, heat up the window panes by gently steaming the full surface of the glass.

• Clean the window area with a manual nozzle and cover. To remove the water, use a squeegee or wipe the surfaces dry.

How to use the Accessories
Steam gun

The steam gun can be used for the following applications without accessories:

• For removing slight creases from the hanging clothing items: Steam the clothing item from a distance of 10-20 cm.
• For wiping damp dust: Steam a cloth briefly and use
  it to wipe over the furniture.

Spotlight nozzle
The spotlight nozzle is suitable for cleaning areas, joins, fittings, drains, sinks, WCs, blinds or radiators that are difficult to access. The closer the spotlight nozzle is to the soiled area, the greater the cleaning efficiency will be as the temperature and steam volume are at their highest at the nozzle opening. Larger lime deposits can be treated before steam cleaning with a suitable detergent.
Allow the detergent to soak in for approx. 5 minutes and then steam it off.

1. Slide the spotlight nozzle onto the steam gun.
   Illustration H

Round brush (small)
The small round brush is used for cleaning stubborn dirt.
Stubborn dirt can be removed more easily by brushing.

ATTENTION
Damaged surfaces
The brush may scratch sensitive surfaces.
It is not suitable for cleaning sensitive surfaces.

1. Fit the round brush to the spotlight nozzle.
   Illustration I

Round brush (large)
The large round brush is suitable for cleaning large rounded surfaces, e.g. wash basin, shower tray, bath tub, kitchen sink.

ATTENTION
Damaged surfaces
The brush may scratch sensitive surfaces.
It is not suitable for cleaning sensitive surfaces.

1. Fit the large round brush to the spotlight nozzle.
   Illustration I

Power nozzle
The power nozzle is used for cleaning stubborn dirt, blowing down corners, joins etc.

1. Install the power nozzle onto the spotlight nozzle according to the round brush.
   Illustration I

Manual nozzle
The manual nozzle is used for cleaning small areas that
can be washed down, shower cubicles and mirrors.

1. Push the manual nozzle onto the steam gun according to the spotlight nozzle. Illustration H
2. Pull the cover over the manual nozzle.

Floor nozzle
The floor nozzle is used for cleaning washable wall and floor coverings e.g. stone floors, tiles and PVC floors.

ATTENTION

Damage due to build-up of steam

Heat and moisture can lead to damage.
Check the heat resistance and steam effect on an inconspicuous area using a minimal volume of steam prior to use.

Note
Detergent residue or care emulsions on the surface to be cleaned can lead to streaks during steam cleaning,
which will disappear however once these have been used several times.
We recommend sweeping the floor or vacuum cleaning it before using the device. In this way the floor will be cleared of dirt and loose particles before the wet cleaning commences. Work slowly on surfaces that are heavily soiled so that the steam has longer to take effect.

1. Connect the extension tubes with the steam gun.
   Illustration J

2. Push the floor nozzle onto the extension tube.
   Illustration K
   

3. Fasten the floor cleaning cloth to the floor nozzle.

   • Place the floor cleaning cloth with the hook and loop fastener strips pointing upwards on the floor.
   • Place the floor nozzle onto the floor cleaning cloth, applying slight pressure.
   • Illustration L
     The floor cleaning cloth will stick to the floor nozzle of its own accord due to the hook and loop fastener.

Removing the floor cleaning cloth

1. Place one foot on the bottom corner of the floor cleaning cloth and lift the floor nozzle up.
   Illustration L

Note
Initially, the floor cleaning cloth’s hook and loop fastener
strip is very strong and cannot be removed from the floor nozzle easily. After the floor cleaning cloth has been used several times and washed, it is easier to remove from the floor nozzle and it has reached the optimum adhesion.

Parking the floor nozzle

1. Hang the floor nozzle in the park bracket during breaks in work.
   Illustration Q

Carpet glider

The carpet glider is used for freshening up carpets.

ATTENTION

• Beware of damaging the carpet glider and carpet Contamination on the carpet glider, as well as heat and moisture penetration, can result in the carpet being damaged.
• Prior to the application, also check the heat resistance and impact of steam on the carpet at an insignificant spot using as small an amount of steam as possible. Observe the cleaning instructions from the carpet manufacturer.
• Prior to using the carpet glider, make sure that the car pet has been vacuumed and that stains have been removed.
• Prior to application and following operating pauses, remove any possible water accumulation (condensate) in the appliance by means of evaporating the condensate into a drain (without floor cleaning cloth / with accessories).
• Only use the carpet glider with a floor cleaning cloth on the floor nozzle.
• Steam clean with a weak steam stage when using the carpet glider.
• In order to prevent too much moistening and to avoid the risk of damage due to temperature effects, do not direct the steam continuously onto one spot (maximum 5 seconds).
• Do not use the carpet glider on deep-pile carpets.

Fastening the carpet glider to the floor nozzle

1. For fastening the floor cleaning cloth to the floor
   nozzle, please refer to chapter Floor nozzle.
   Illustration L

2. Using a little force, allow the floor nozzle to slide into
   the carpet glider and engage there.
   Illustration M

3. Start cleaning the carpet.
   Removing the carpet glider from the floor nozzle

CAUTION

• Beware of burns to your feet
• The carpet glider can heat up during the steaming process.
• Do not operate or remove the carpet glider bare-footed or using open sandals.
• Only operate or remove the carpet glider using suitable footwear.

1. Press the strap on the carpet glider downwards using your toecap.
2. Lift the floor nozzle upwards.
   Illustration M

Care and service

Draining the water reservoir

ATTENTION
Device damage due to water putrefaction
If the device is not put into operation for more than 2 months, the water in the reservoir may putrefy.
Drain the water reservoir before breaks in operation.

1. Press the Off switch.
   The device has been switched off.

2. Pull the mains plug out of the socket.

3. Remove the accessories from the accessory holders.

4. Remove the decalcification cartridge from the device.

5. Drain the water reservoir.
   Illustration S

Replacing the decalcification cartridge

ATTENTION
Device damage and shortened service life
If the replacement intervals (indicator light) for the decalcification cartridge are not observed, there is a risk of device damage and the service life of the device may be shortened.
Observe the replacement intervals (indicator light).

Note
The replacement intervals depends on the local water hardness. Areas with hard water (e.g. III/IV) have a higher replacement interval than areas with soft water (e.g. I/II).

Indicator lamp at end of the run time
The “decalcification cartridge indicator light” indicates

when the decalcification cartridge has to be replaced:

• The indicator light flashes 2 hours before the run time expires.
• The indicator light flashes more quickly 1 hour before the run time expires.
• Once the run time for the decalcification cartridge has expired, the indicator light lights up constantly and the device switches off automatically in order to prevent device damage.

Inserting the decalcification cartridge
ATTENTION

Device damage
There is a risk of damage to the device if the used decalcification cartridge is re-used.
Work carefully in order to prevent mixing up the cartridges.

Note
When steaming for the first time after removing and reinserting the decalcification cartridge, the steam jet may be weak or irregular, and individual drops of water may be expelled. The device requires a short running-in period in which the decalcification cartridge fills with water.
The steam volume that is expelled increases constantly until the maximum steam volume has been reached after approx. 30 seconds.

1. Press the Off switch.
   The device has been switched off.

2. Remove the decalcification cartridge.

3. Insert the new decalcification cartridge.

4. Press the On switch.
   The device is switched on.

5. The “replace decalcification cartridge” indicator light goes out and the run time for the decalcification cartridge starts again.

6. Allow the device to heat up.

7. Press and hold the steam lever for approximately 30 seconds to vent the decalcification cartridge.

Setting the water hardness

ATTENTION

• Device damage due to calcification Without a decalcification cartridge, the device may calcify
• if the water hardness is set incorrectly.
• Always work with a decalcification cartridge.
• Set the device to the local water hardness.

Set the device to the current water hardness before using it in an area with a different water hardness (e.g. after a move).

Note
Your water board or municipal utilities authority can provide information on the hardness of tap water.
The water hardness is set using the RESET button. The water hardness setting is stored until a new setting (e.g. after a move) is made. The device is set to the highest water hardness (level IV) in the factory. The device indicates the set water hardness with flash pulses.

Water hardness levels and flash pulses

Hardness range| °dH| mmol/l| Number of flash pulses| Interval between flash pulses
---|---|---|---|---
I| soft| 0-7| 0-1.3| 1x| 4 seconds
II| Medium| 7-14| 1.3-2.5| 2x
III| Hard| 14-21| 2.5-3.8| 3x
IV| Very hard| >21| >3.8| 4x

Note
The anti-calcification effect of the decalcification cartridge is activated as soon as the device is filled with wa-ter and put into operation. Lime in the water is absorbed by the granulate in the decalcification cartridge. Additional descaling is not required.

Note
The granulate in the cartridge can discolour on contact with water due to the mineral content in the water, which is no cause for concern and has no negative effects on the device, cleaning work or the functionality of the cartridge.

Note
Do not pause for longer than 15 seconds when setting as the device will otherwise be set automatically to the last selected water hardness or the highest water hardness set during initial start-up.

1. Connect the mains plug.

2. Make sure that the device is switched off.

3. Press the RESET button and hold it while the device is switched on.
   Illustration G
   After approximately 2 seconds, the indicator light flashes and signals the current water hardness setting with the number of pulses.

4. Press the RESET key repeatedly to change the wa-ter hardness level.
   Note
   When the RESET key is pressed, the flash pulse for the water hardness level is not indicated.

5. Release the RESET key.
   The flash pulse for the set water hardness is indicated.

6. Repeat the process as necessary until the desired water hardness level has been achieved.

7. Press and hold the RESET key for 3 seconds to save the setting for the water hardness level.
   The indicator light for the water hardness lights up.

Care of accessories

(Accessories – depending on scope of delivery)

Note
The micro fibre cloths are not suitable for dryer.

Note
For optimum cleaning performance, we recommend machine washing the cloths once before first use. When washing, observe the notes on the washing tag. Do not use any liquid softeners as this will affect the abil-ity of the cloths to pick up dirt.

1. Wash the floor cleaning cloths and covers at a max. temperature of 60 °C in the washing machine.

Troubleshooting guide

Malfunctions often have simple causes that you can remedy yourself using the following overview. When in doubt, or in the case of malfunctions not mentioned here, please contact your authorised Customer Service.

WARNING

Risk of electric shock and burns
Trying to eliminate faults while the appliance is connected to the mains or has not yet cooled down is always dangerous.

Remove the mains plug.
Allow the appliance to cool down.
The water shortage indicator light flashes red
The dry-run protection for the pump is deactivated.

1. Switch the device off and back on again.
2. Make sure that the decalcification cartridge has been inserted correctly and there is sufficient water in the reservoir.

The water shortage indicator light lights up constantly in red No water in the water reservoir.

1. Top up the water reservoir, see chapter Topping up the water.

The steam lever cannot be pressed

The steam lever is locked with the child lock.

• Set the child lock (selector switch for steam volume) to the front.
  The steam lever is released.
  No / little steam although there is water in the reservoir
  The decalcification cartridge has not been inserted or has been inserted incorrectly.

• Insert the decalcification cartridge or insert it correctly.
  The decalcification cartridge has been removed while topping up the water.

• Leave the decalcification cartridge in the device when topping up.
  New decalcification cartridge has been inserted.

• Press and hold the steam lever constantly.
  The full steam output is reached after approximately 30 seconds.
  Red indicator light “replace descaling cartridge”

lights up / flashes
Run time of the decalcification cartridge ends soon.

• Insert the new decalcification cartridge and reset the maintenance indicator, see chapter Replacing the decalcification cartridge.
  The RESET key was not pressed after the replacement of the decalcification cartridge.

• Press and hold the RESET key for 4 seconds after inserting the decalcification cartridge, see chapter Replacing the decalcification cartridge.

Device switches off automatically
Run time for the decalcification cartridge has expired

• Insert the new decalcification cartridge and reset the maintenance indicator, see chapter Replacing the decalcification cartridge.

The RESET key was not pressed after replacement of the decalcification cartridge.

• Press and hold the RESET key for 4 seconds after inserting the decalcification cartridge, see chapter Replacing the decalcification cartridge.

Technical data

Electrical connection|
---|---
Voltage| V| 220-240
Phase| ~| 1
Frequency| Hz| 50-60
Protection class| | IPX4
Protection category| | I
Performance data| |
Heating capacity| W| 1900
Maximum operating pressure| MPa| 0.35
Heating-up time| Seconds| 30
Continuous steaming| g/min| 40
Maximum steam blast| g/min| 100
Filling quantity| |
Water reservoir| l| 1.0
Dimensions and weights| |
Weight (without accessories)| kg| 3.2
Length| mm| 360
Width| mm| 236
Height| mm| 252

THANK YOU!
Register your product and benefit from many advantages.

www.kaercher.com/welcome

Rate your product and tell us your opinion.

www.kaercher.com/dealersearch
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28-40
71364 Winnenden (Germany)

References

• Cher - Official Site
• Cleaning equipment and pressure washers | Kärcher International
• Dealer Search | Kärcher International
• Home and Garden Warranty Registration USA - Kärcher
• Reinigungsgeräte und Hochdruckreiniger | Kärcher

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>