Q-TRAN JLU L-Shaped Brackets For Surfacing Mounting Light Installation Guide
- June 13, 2024
- Q-TRAN
Table of Contents
Q-TRAN JLU L-Shaped Brackets For Surfacing Mounting Light
OTHER MODEL
-
NJ-GRAZER
-
NJ-LARGE
-
NJ-MICRO
-
NL-LARGE
-
NL-MICRO
-
NU-GRAZER
DIMEIONSION
COMPONENTS & HARDWARE
HARDWARE
SS FLAT HEAD PHILLIPS #6×3/4”| U-BRACKET WALL MOUNTING CLIP
|
ACCESSORIES
INLINE CONNECTOR
| Included
| SS SET SCREWS #6x32x1/8
WALL MOUNTING – J & L – WITH CLIPS
- 2 clips provided for 4’ or less; 4 clips provided for greater than 4’
- If using multiple lengths, see pg 5
Predrill holes, 16” on the center, into the mounting screw track.
Mount the appropriate clips for the fixture. 2 clips for 4’ or less, 4 clips for 8’ or less
Use the predrilled holes to mount the bracket on to the wall
Mount the fixture onto the bracket, refer to fixture installation instructions for any additional steps.
WALL MOUNTING BRACKET – U
- If using multiple lengths, see pg 5
Mount each clip 16” from the center. Refer to Steps 1 & 2 on pg 3 to prepare the bracket for wall mounting.
Mount the U Bracket onto the wall mount clip by:
A. Hook in the top portion of the U Bracket onto the top of the mounting clip.
B. Snap the bottom part of the bracket on to the clip, to engage the locking mechanism.
Mount the fixture onto the bracket, refer to fixture installation instructions for any additional steps.
INLINE-CONNECTOR FOR J, L, & U BRACKET
Slide the inline connector into the inline connector slot of the mounted run.
Mount the bracket on to the wall. Refer to Steps 1 & 2 on pg3 to prepare
bracket for wall mounting
Mount the second bracket to the wall.
Complete by sliding the inline connector into position to join both brackets.
Secure by fastening all set screws, then mount the fixture onto the mounting
clips.
References
- Your Name as Your Email | Hover Realnames
- LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>