VEVOR FR900K Bag Band Sealing Machine User Manual
- June 13, 2024
- VEVOR
Table of Contents
FR900K Bag Band Sealing Machine
Product Information: Bag Sealer
- Name: Bag Sealer
- Safe System of Work: Operating and Safety
Instructions
Operating and Safety Instructions:
-
Explain that safety equipment must be used at all times when
running the machine. -
Switch on the sealer using the switch on the wall, then turn
the switch situated on the machine to the required setting. -
Select the required lay flat size.
-
Pull the lay flat through the clamp on the sealer to the
desired length, press the clamp down, and hold until the red light
goes out. -
Cut off the bag only after the red light has deactivated. This
can be done using the safety knife attached. -
Do not place fingers close to the weld bar as burning may
occur. -
Do not use the machine unless trained and authorized by the
Manager/Setter.
Confirmation of Training:
I have received the above training and fully understand every
point that was explained to me. I confirm that I will wear the
required PPE equipment when using the above machinery and take all
steps to ensure my own safety. I will ask for further training if I
need to and will immediately inform the Supervisor or Manager if
there are any issues with the machinery.
| Name: | _____ | Training Date: | ____ |
|---|---|---|---|
| Signed: | _____ | Date: | ____ |
Authorization:
I confirm that I have trained the aforementioned person and that
they fully understand how to use the above machinery, have received
the required PPE equipment, and know to inform me immediately of
any issues with the machinery or if they require further training.
I authorize this person to use the machinery detailed above.
Name:| _____ (Authorized Trainer)| Date:|
---|---|---|---
Signed:| _____
Safe System of Work OPERATING AND SAFETY INSTRUCTIONS FOR BAG SEALER
Name: ……………………………………………………….. Training Date:……………………………..
Instruction
Understands or X
1 Explain that safety equipment must be used at all times
and why safety boots must be used at all times when
running machines.
2 Switch on sealer using switch on wall, then turn switch
situated on the machine to the required setting.
3 Select required lay flat size.
4 Pull lay flat through clamp on sealer to desired length,
press clamp down, Hold until red light goes out.
5 Cut off bag only after the red light has de activated, this
can be done using the safety knife attached.
6 Do not place fingers close to weld bar as burning may
occur?
7 Do not use any machine unless trained and authorised
by Manager/ Setter.
I have received the above training and fully understand every point that was
explained to me. I confirm that I will wear the required PPE equipment when
using the above machinery and take all steps to ensure my own safety. I will
ask for further training if I need to and will immediately inform the
Supervisor or Manager if there are any issues with the machinery.
Name: ………………………………………………………………………………………………………….
Signed: ……………………………………………………………….. Date:…………………………………
I confirm that I have trained the aforementioned person and that they fully
understand how to use the above machinery, have received the required PPE
equipment and know to inform me immediately of any issues with the machinery
or if they require further training. I authorise this person to use the
machinery detailed above.
Name: ………………………………………………………………………………….(Authorised Trainer)
Signed …………………………………………………………………… Date: ……………………………
SSW WHS 1 15/03/16