PHILIPS 24W-865 HO High Output G5 Illuminate Brilliance User Manual
- June 17, 2024
- Philips
Table of Contents
PHILIPS 24W-865 HO High Output G5 Illuminate Brilliance
Product Information
The product is the MASTER TL5 HO, specifically the MASTER TL5 HO 24W/865 SLV/40 model. It is a lighting product with a power consumption of 22.7W and a current of 0.295A. The lamp type is T5 with a diameter of 16mm (T5). It has a G5 base and a maximum length of 549.0mm. The product is designed to have a long life expectancy and high luminous flux.
Specifications
- Product: MASTER TL5 HO 24W/865 SLV/40
- Power Consumption: 22.7W
- Current: 0.295A
- Lamp Type: T5 (16mm)
- Base: G5
- Length: 549.0mm
Warnings and Safety
A damaged lamp is not likely to emit dangerous substances. If the lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Place them in a sealed plastic bag and take it to your local waste facilities for recycling advice. Do not use a vacuum cleaner.
Product Data
| Specification | Detail |
|---|---|
| General Information | Cap-Base: G5 [Not Applicable] |
| Electrical Data | Nominal Lamp Wattage: 22.7 W |
Lamp Current (nom.): 0.295 A
Product Dimensions| Refer to the ‘Dimensional Diagram’ section below.
Light Technical Data| Color Code: 865 [CCT of 6500K] Luminous Flux (nominal):
2200 lm
Color Designation: Cool Daylight
Chromaticity Coordinate X: 0.313
Chromaticity Coordinate Y: 0.337
Color Rendering Index (nom.): 82
Product Lifespan| Refer to the ‘Life Expectancy and Lumen Maintenance
Diagrams’ section below.
Product Usage Instructions
Installation
- Ensure that the power is turned off before installing the product.
- Insert the MASTER TL5 HO lamp into the appropriate fixture, aligning the pins with the socket.
- Gently push the lamp into place until it is securely seated.
Usage
To use the MASTER TL5 HO lamp, follow these steps:
- Make sure the power is turned on.
- The lamp will start to emit light immediately after being powered on.
- Adjust the positioning of the lamp as desired to achieve thedesired lighting effect.
Maintenance
To maintain the performance of the MASTER TL5 HO lamp, consider the following:
- Regularly clean the lamp and fixture to remove dust and dirt that may reduce light output.
- Replace the lamp according to the recommended lifespan or if it shows signs of damage or malfunction.
- Ensure that the power is turned off before performing any maintenance or replacement procedures.
Dimensional Diagram
Product: MASTER TL5 HO 24W/865 SLV/40
- D (max): 17 mm
- A (max): 549.0 mm
- B (max): 556.1 mm
- B (min): 553.7 mm
- C (max): 563.2 mm
Photometric Data
Spectral Power Distribution Colour – MASTER TL5 HO 24W/865 SLV/40
Describes the distribution of power across the spectrum of visible light, from 300 to 700 nm.
Additional Information
Datasheet Date: April 16, 2023
For more information on sustainable LED lighting solutions, please visit Philips Lighting.
Note: All data is subject to change without notice. No rights can be derived from this documentation.
Life Expectancy and Lumen Maintenance Diagrams
Illustrates the expected operational lifespan of the MASTER TL5 HO 24W/865
SLV/40 lamp and the maintenance of its lumen output over time.
FAQ
Q: What is the power consumption of the MASTER TL5 HO 24W/865 SLV/40
lamp?
A: The power consumption of the lamp is 22.7W.
Q: What is the length of the MASTER TL5 HO 24W/865 SLV/40 lamp?
A: The length of the lamp is 549.0mm.
Q: How should I install the MASTER TL5 HO lamp?
A: To install the lamp, make sure the power is turned off, align the pins
with the socket, and gently push it into place until it is securely seated.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>