CHIPHY D1002 Remote Timer LED Desk Lamp Installation Guide
- May 15, 2024
- CHIPHY
Table of Contents
Remote Timer
LED desk lamp
D1002 Remote Timer LED Desk Lamp
| Model | D1002 |
|---|---|
| Item No. | RD02-002 |
| Dimensions | D9.2*H16-30.76 inch |
| Material | Aluminum /Steel /PC |
| Power | 40W |
| Volt | 100-240V |
| Frequency | 50/60Hz |
| Luminous flux | 30001m |
| CCT | 2300K-6500K |
| CRI | Ra≥95 |
| Lifespan | 50000h |
Parts identification guide
Installation options
KEY FUNCTION DESCRIPTION
Touch Panel（Memory function）
Key Function Introduction
| ● Short-press for brightness up（10 levels）
● Long-press for brightnessmaximize
● Double click for the color temperature up（10 levels）
---|---
● Short-press for brightness down（10 levels）
● Long-press for brightnessminimum
● Double click for the color temperature down（10 levels）
● Short-press to turn on/off
● Long-press when light offto enter the night light
● Long-press to turn off in 45 minutes when light on
● Double-press turn off in 1 minute when light on to
Timing
- Short-press with both fingers, select the timing mode (Red-Green-Blue-None, Red 4h/Green 8h/Blue 12h/None No timing state)
- After the time setting is completed, the corresponding timing indicator is on. It indicates that the lamp is in the corresponding timing state
- If you don’t cancel the timing setting, it will always work, every day
Cancel Timing
- Press with both fingers at the same time to switch the color of timing indicator to none; the timing setting is cancelled
- Or cancel the timing function through the remote control
- Or cut off the power supply of the lamp and cancel the timing setting
REMOTE CONTROL
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>