VEVOR 3600RPM Chop Saw Blade Diameter Cut User Manual
- June 13, 2024
- VEVOR
Table of Contents
Safe System of Work
OPERATING AND SAFETY INSTRUCTIONS
FOR LOCKING OFF MACHINERY (TIMBER PRODUCTS)
3600RPM Chop Saw Blade Diameter Cut
Name: ………………………………………
Training Date:…..…………………………
| Instruction| Understood ✓ or X
---|---|---
1| Lock off to be instigated by Manager, Supervisor or any TRAINED personal.|
2| Machine needs to be locked off if you are undertaking any maintenance
requiring safety guards being removed or any electrical tasks being done.|
3| Turn isolator switch to off position and pull out or push in tag at end of
switch lever. Put padlock through the tag and close the padlock|
4| Remove the key and keep the key on your person at all times. DO NOT GIVE
THE KEY TO ANOTHER PERSON
as they could potentially turn on a machine you are working on. If the task
is a long-term breakdown or major maintenance operation for more than 1 hour
put the key in the lock out box. If minor maintenance task is not finished by
the end of shift where you need to keep your key on you, or you need to leave
work suddenly put the key in lock out box in the Timber products office. Only
the Timber products manager will have access to the lock out box|
5| Fill out the lock off padlock logbook situated on the Timber Products
office|
6| When you are ready to release the isolator and return the padlock and key,
you must sign the book with a date, time and signature.|
I have received the above training and fully understand every point that was
explained to me. I confirm that I will wear the required PPE equipment when
using the above machinery and take all steps to ensure my own safety. I will
ask for further training if I need to and will immediately inform the
Supervisor or Manager if there are any issues with the machinery.
Name: ………………………………
Signed: ……………………………
Date:…………………………………
I confirm that I have trained the aforementioned person and that they fully
understand how to use the above machinery, have received the required PPE
equipment and know to inform me immediately of any issues with the machinery
or if they require further training. I authorize this person to use the
machinery detailed above.
Name: ……………………………(Authorised Trainer)
Signed ……………………………………………
Date: ……………………………
SSW TP 16 03/04/18