ZERO CK2150 Power Timer Coffee Scale User Manual

Table of Contents

ZERO-CK2150-Power-Timer-Coffee-Scale-product

Sign Tips

Insert USB cable for charging, the below icon on display is blinking.
Usually it will take 2-5 hours for full charging, the scale will show FULL as below after fully charge.
After fully charge, pull out the USB cable, LED display as below.
When the scale is overloaded:
When the voltage of the battery is too low, and the scale is unable to work, please charge it in time.
Weight unstable indication, please put it on a hard and flat surface.

Unit Conversion

When powered on, the scale will show unit from last use.
If the user needs to switch the unit, keep short pressing for 2s to change the unit between g-oz-ml.

Timer Operation (2 timing modes for option)

Manual timing mode operation
- Press “” to turn it on, after a full display and the scale reset to zero, it means ready for weighing.
- Press “” to start timer function. The timer display from 0 to 99m:59s in cycle and will auto off.
- On timer mode, short press ““” to stop, touch it again to continue.
- On Timer mode, press ““” twice to exit manual timing mode.

ZERO-CK2150-Power-Timer-Coffee-Scale-fig-4

Insert USB cable for charging, the below icon on display is blinking.
Usually it will take 2-5 hours for full charging, the scale will show FULL as below after fully charge.
After fully charge, pull out the USB cable, LED display as below.
When the scale is overloaded:
When the voltage of the battery is too low, and the scale is unable to work, please charge it in time.
Weight unstable indication, please put it on a hard and flat surface.

ZERO-CK2150-Power-Timer-Coffee-Scale-fig-10

When powered on, the scale will show unit from last use.
If the user need to switch the unit, keep short pressing button for 2s to change the unit between g-oz-ml.

Timer operation (2 timing modes for option)

Manual timing mode operation

ZERO-CK2150-Power-Timer-Coffee-Scale-fig-11

Press button to turn it on, after a full display and the scale reset to zero, it means ready for weighing , press button to start timer function, The timer display from 0 to 99m:59s in cycle and will auto off.
On timer mode, short press button to stop, touch it again to continue.
On Timer mode, press button twice to exit manual timing mode

Auto timing mode operation

Press button to turn it on, after a full display and the scale reset to zero, it means ready for weighing , short press button twice to enter auto timing mode
Put a hand-brewed coffee equipment on the scale for weighing, after weight stable, the scale reset to zero automatically.
Load hand-brewed coffee equipement with few coffee powder, press button to reset scale to zero.
Pour water into hand-brewed coffee equipment, the scale starts timing automatically.
After removing all weights, the scale will reset to zero automatically.
The scale will be auto off after 180 seconds without any operation and stopped timing

How to exit auto timing mode

Put the scale on the flat and hard surface, press button for 2s to turn it on. After a full display, you will see zero, which means the scale is ready to weigh.
Put the item that you want to weigh on the scale, and the LED display will show the weight. Press the button to reset the scale to zero.

Caution

DON’T disassemble this device. If you have any problems, please contact us.
A 250mAh lithium-ion rechargeable battery is built in the scale.
- Do NOT dispose of them together with the household garbage.
- Please refer to the local ordinances and recycling instructions regarding disposal of the worn batteries.
Do not use during charging.
This product is powered by a lithium battery. DO NOT charge after its power is used up. It’ s recommended to charge it in time after it indicate low battery.