ZERO ZERO ROBOTICS V-Coptr Falcon Small Smart Drone Instruction Manual

ZERO ZERO ROBOTICS V-Coptr Falcon Small Smart Drone

Disclaimer and Warning

• Please be sure to read this document carefully to understand your legal rights, responsibilities, and safety instructions before using the product. V-Coptr Falcon is a small smart drone with a camera and camera functions. It is not a toy. Anyone who may be unsafe when operating V-Coptr Falcon should not use this product. This group of people includes but is not limited to:

1. Children under the age of 14;
2. People under the influence of alcohol, medication, who have dizziness, or are in a poor physical or mental state;
3. People in conditions that make them unable to safely operate V-Coptr Falcon;
4. People in the above-mentioned states who choose to operate V-Coptr Falcon anyways must do so carefully.

• You should read the entire contents of this document, and operate V-Coptr Falcon only after being familiar with the features of the product. Failure to operate this product properly may result in property damage, safety hazards, and personal injury. By using this product, you are deemed to have understood, endorsed and accepted all the terms and contents of this document. The user is committed to being responsible for his or her actions and all consequences arising therefrom. The user promises to use the product only for legitimate purposes, and agrees to all the terms and contents of this document and any relevant policies or guidelines that may be developed by Shenzhen Zero Zero Infinity Technology Co., Ltd.
  (hereinafter referred to as “Zero Zero”) .

• Zero Zero does not assume any loss caused by the user’s failure to use the product in accordance with this document, the User Manual, the relevant policies or guidelines. In the case of compliance with laws and regulations, Zero Zero has the final interpretation of this document. Zero Zero reserves the right to update, revise or terminate this document without prior notice.

Safety Instructions

Flight Environment
V- Coptr Falcon should be flown in a normal flight environment. A normal flight environment includes but is not limited to:

1. An open environment away from people, animals, no-fly signs, electromagnetic interference, and buildings;
2. It is not recommended for flying at high altitudes;
3. In temperatures of 0 ° C – 40 ° C and good weather (no rain , snow , fog, thunder, wind, hail or extreme weather conditions) conditions, as well as in legal areas . For legal areas, please read the “Flight Regulations and Restrictions” section;
4. Flying in an environment with a maximum of Grade 5 winds, otherwise the drone may not be able to fly normally, or may even cause damage or personal injury;
5. When flying indoors, functions of V-Coptr Falcon may be limited due to insufficient lighting, poor GPS signal, insufficient space and other environmental factors;
6. Do not let the drone fly in an environment where the ground height varies greatly (e.g. fly out of a high-rise window)and when the GPS signal is weak, in case the positioning function is interfered and thus impacts flight safety.

Wireless Communication
You should ensure that wireless communication is working properly before flying V-Coptr Falcon Conditions for wireless communication to work properly include but are not limited to:

1. Be sure to operate the drone in an open space. Areas such as tall buildings, mountains, and woods may interfere with the compass and GPS signals of the drone;
2. To prevent the BlastOff Controller from interfering with other wireless devices, be sure to turn off the other wireless devices before using the BlastOff Controller;
3. It is forbidden to fly near sources of electromagnetic interference. Electromagnetic interference sources include, but are not limited to: Wi-Fi hotspots, Bluetooth devices, high voltage power lines, high voltage transformer stations, mobile phone base stations and television broadcast signal towers. If the flight location is not selected in accordance with the above provisions, V-Coptr Falcon wireless transmission performance will likely be affected by interference. If the interference is too large, V-Coptr Falcon will not work normally.

Pre-flight Inspection
Before using V-Coptr Falcon you should make sure that you fully understand the drone, its peripheral components and anything involved with V-Coptr Falcon Pre-flight inspection should include but is not limited to:

1. Ensure the drone, BlastOff Controller, and mobile devices are fullycharged;
2. Ensure that the drone and its components are installed and work properly, including but not limited to: drone fuselage, batteries, propellers, and any other flight related components;
3. User has followed pre-flight inspection prompts in the App;
4. Ensure the firmware and App have been updated to the latest version;
5. Ensure that you have read and understood the User Manual, Quick Guide and related documents and are familiar with operations of the product.

Operating V-Coptr Falcon
Make sure that V-Coptr Falcon is properly operated and always pay attention to flight safety. Any consequences such as drone malfunctions, property damage, etc. due to user’s incorrect operation of the drone, will be borne by the user. The correct methods of operating V-Coptr Falcon include but are not limited to:

1. Do not start the motors when the drone is folded, otherwise the drone may be damaged;
2. Do not approach the propellers and motors when they are working;
3. Please ensure that the drone is flying in an environment without signal interference, and operate the drone within sight. During the flight, do not take phone calls, send text messages or use any functions of your mobile device which may interfere with the operation of the drone. Avoid reflective areas such as flying over water surfaces or snowfields. When the GPS signal is weak, please ensure that the drone is flying in an open environment with sufficient lighting;
4. Please maintain control of the drone throughout the flight, and do not rely solely on the vision system and the information provided by App. In each flight mode and flight environment, you are responsible for observing the surrounding environment of the drone, reasonably judging the flight conditions and avoiding obstacles in time;
5. Please return the drone as soon as possible when there is a low battery warning or other abnormal flight status;
6. When V-Coptr Falcon is in an intelligent flight mode (including Cinematic Mode and the Omni-follow Mode, etc.), please ensure that the drone has enough room to operate, and that no obstacles block the preset flight path. Pay attention to the safety of the surrounding environment during the flight and control the drone in time when any safety problems occur;
7. Please make sure that V-Coptr Falcon is fully charged and in normal working conditions when shooting important photos or videos and make sure to turn off V-Coptr Falcon correctly. Otherwise, it may cause damage to or loss of data. Zero Zero does not assume any responsibility for corrupted data that can not be read;
8. Please operate the gimbal correctly, and do not apply external force to the gimbal when it is in use;
9. Please carefully handle the removal, installation, adjustment, etc. of the propellers and ensure that V-Coptr Falcon remains turned off;
10. Only use V-Coptr Falcon’s official accessories. You are solely responsible for any consequences resulting from the use of unofficial accessories;
11. Do not modify V-Coptr Falcon privately. The user is responsible for all consequences caused by private modification.

Other Safety Issues

1. Do not operate this product in poor physical or mental conditions such as under the influence of alcohol or drugs, drug anesthesia, dizziness, fatigue, nausea, etc.
2. Do not use V-Coptr Falcon to throw or launch any dangerous object towards buildings, people or animals.
3. Do not use a drone which has experienced serious flight accidents or abnormal flight conditions.
4. When using V-Coptr Falcon be sure to respect others’ privacy. It is forbidden to use V-Coptr Falcon to conduct any violations of the rights of others.
5. Ensure that you understand the local laws and regulations related to drones. It is forbidden to use V-Coptr Falcon to conduct any illegal and improper behaviors, including but not limited to espionage, military operations and other illegal work.

Storage and Transportation

Product Storage

1. Place V-Coptr Falcon in a protective case, and do not squeeze or expose V-Coptr Falcon to sunlight.
2. Never allow the drone to come in contact with liquids or be immersed in water. If the drone gets wet, please wipe it dry promptly. Never turn on the drone immediately after it has fallen into the water, otherwise it will cause permanent damage to the drone.
3. When V-Coptr Falcon is not in use, make sure the battery is stored in an appropriate environment.Recommended battery storage temperature range:Short-term storage (not more than three months): -10 ° C ~ 30 ° C ; Long-term storage (more than three months): 25 ± 3 °C .
4. Check battery health with the App. Please replace the battery after 300 charge cycles. For more details of battery maintenance, please read the “Intelligent Battery Safety Instructions”.

Product Transportation

1. Temperature range when transporting batteries : 23 ± 5 °C.
2. Please check the airport regulations when carrying the batteries on board, and do not transport batteries that are damaged or have other abnormalities.

Flight Regulations and Restrictions
Legal norms and flying policies may vary in different countries or regions, please contact your local authorities for specific information.

Flight Regulations

1. It is forbidden to operate the drone in the no-fly zones and sensitive areas prohibited by laws and regulations.
2. It is forbidden to operate the drone in densely populated areas. Always be vigilant and avoid other drones. If necessary, please land the drone immediately.
3. Ensure that the drone is flying within sight, if necessary, arrange observers to help you monitor the position of the drone.
4. It is forbidden to use the drone to transport or carry any illegal dangerous objects.
5. Make sure you have understood the type of flight activity and obtained the necessary flight permits from the relevant local flight department. It is forbidden to use V-Coptr Falcon to conduct unauthorized flight activities and any illegal flight behavior that violate the rights of other people.

Flight Restrictions

1. You need to use V-Coptr Falcon safely in compliance with local laws and regulations. It is highly recommended that you download and install the latest version of the firmware from official channels. Make sure that the flight restriction function can work properly.
2. Flight restricted areas include but are not limited to: the world’s major airports, major cities/regions, and temporary event areas. Please consult your local flight management department before flying V-Coptr Falcon and follow local laws and regulations. In different flight restricted area, you will be subject to different levels of flight restrictions, including but not limited to: warning, prohibiting take-off, etc.
3. Different countries or regions all have restrictions on the maximum flying height of the drone, and you must strictly comply with the local flying height restrictions.
4. When flying at an altitude below 100 meters, please always pay attention to the surroundings of the drone and stay away from any obstacles that may hinder flight. These include but are not limited to tall buildings, mountains and woods.
5. The functions of V-Coptr Falcon will be affected by approaching or flying in restricted areas. These effects include but are not limited to: the drone will decelerate when it is near the flight restricted area; the flight mission cannot be set; the ongoing mission will be interrupted, etc.

Compliance Information

Battery Use Warning Caution
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.

FCC Regulations FCC
This equipment complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2.  this device must accept any interference received, including anterference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

FCC Note FCC
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This guide will be updated irregularly, please visit zzrobotics.com/support/downloads to check out the latest version. © 2020 Shenzhen Zero Zero Infinity Technology Co., Ltd. All rights reserved.

References

• Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>