LUCIDE 19791-24-12 ZENITH Reading Lamp Instruction Manual
- June 13, 2024
- LUCIDE
Table of Contents
- LUCIDE 19791-24-12 ZENITH Reading Lamp
- Product Information
- Product Usage Instructions
- General
- Specifications
- TECHNICAL DRAWING & DIMENSIONS
- Safety Instructions
- Explanation of the symbols which can appear on the fixture
- Warranty declaration
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
LUCIDE 19791-24-12 ZENITH Reading Lamp
Product Information
- Thank you for purchasing a Lucide original! Lucide aims to inspire and illuminate its clients by offering trendy, high-quality, and affordable lighting solutions. Welcome to the community of #illuminatesyourworld.
- Discover our collection by visiting our website. Watch our brand video to get a glimpse behind the scenes at Lucide and see how others around the world use Lucide products. Stay updated with the latest lighting trends by following us!
Product Usage Instructions
Safety Instructions
This product is only suitable for indoor use, excluding the bathroom (unless a
higher IP degree permits its use in the bathroom).
Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. If this product is marked with the symbol indicating separate collection, it should be returned to a municipal waste collection point.
- Class I: This product has an earth connection. The earth wire (green-yellow) must be connected to the earth connection (marked with the respective symbol).
- Class II: This product is double insulated and must not be connected to the earth wire.
- Class III: This product is only suitable for lower voltage supply and must not be connected to the earth wire.
If the protection glass is damaged or broken, it should be replaced immediately. Ensure that there is a minimum distance between the bulb and inflammable objects.
Please refer to the IP rating mentioned in the manual for protection against contact with a finger. IP 20 indicates protection against touch with a finger, while IP 44 denotes a higher level of protection.
Thank you for purchasing a Lucide original!
This manual will hopefully guide you easily through the installation process.
We aim to inspire and illuminate our clients by offering trendy, high-quality
and affordable lighting. Welcome to the community of #illuminatesyourworld
DISCOVER OUR COLLECTION!
Visit our website and discover our entire collection
CURIOUS ABOUT OUR BRAND?
Our brand video gives you a glimpse behind the scenes at Lucide
#ILLUMINATESYOURWORLD
Take a look at how others around the world use Lucide products
General
- Dimensions LxWxH: 25,4cm x 53,2cm x 160cm
- Main material: Metal
- Color: Satin Chrome
- Style: Modern
- Weight: 4,90 kg
Specifications
- Dimmable: Yes
- Light direction: Uplight and downlight
- Adjustable in height: Not In Height Adjustable
- Directional: Tiltable (Vertical)
- Cable: Yes, Cable With Plug On Product
- Cable length: 250cm
- Sensor: Without Sensor
- Control: Dimmer – On The Product
- Power supply: Adapter/Power Grid
- IP-Class: 20
- Electric Class: 1
- Number of light sources: 1
- Lamp socket: Integrated LED
- Maximum wattage: 20W
- Power requirements: 220-240V-50Hz
- Lumen: 1600 Lm
- Color temperature: 3000 K
- Color Rendering Index: 60
- Expected lifetime: 15000h
- Warranty: 3 Years
For more specifications of this product please visit www.lucide.com.
TECHNICAL DRAWING & DIMENSIONS
Safety Instructions
- Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct installation and functioning of the light fixture. The manufacturer does not accept any responsibility for damage caused by improper installation and service. Installation should always be done by a qualified electrician.
- Always isolate the power before commencing installation, maintenance or repair.
- In case of doubts, please contact a qualified electrician.
- Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installation, please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products.
- During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician.
- This is to avoid all risks.
- Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).
Explanation of the symbols which can appear on the fixture
- This item is only suitable for indoor use, exclusive bathroom (except if a higher IP degree permits that the item can be used in the bathroom).
- Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and electronic equipment marked with this symbol indicating a separate collection of such equipment must be returned to a municipal waste collection point.
- Class I: The item has an earth connection. The earth wire (green-yellow) needs to be connected to the earth connection (marked with this symbol).
- Class II: The item is double insulated and must not be connected to the earth wire.
- Class III: The item is only suitable for lower voltage supply and must not be connected to the earth wire.
- IP 20: Protection against contact with a finger
- If the protection glass is damaged or broken, it needs to be replaced immediately.
- Please respect the minimum distance from the bulb to inflammable objects.
Warranty declaration
Lucide NV warrants that the products supplied will be free from defects in material and workmanship for a period of 3 years from the date of purchase by the end user if the item is installed and maintained properly as mentioned in the user manual.
Exclusions for the warranty:
- Broken glass parts of the fixture will only be replaced within 14 days after purchasing by the end user.
- Normal wear and tear, and discoloring as a result of normal use.
- Damage is caused by external causes like fire, water, wrong use/installation, or maintenance of the product. For warranty claims, the customer needs to hand over the defective fixture/part and the original purchase ticket.
Further explanations can be found on our website. www.lucide.com.
LUCIDE NV
- LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100 DEURNE, BELGIUM
- E-mail: info@lucide.com.
- tel: +32(0)3 366 22 04
- Website: www.lucide.com.