M LLER-LICHT 404087 Series LED Tuin Lamp Calluna Instruction Manual
- June 16, 2024
- M LLER-LICHT
Table of Contents
Installation Instructions
tint LED-Leuchtkugel
Art. 404079, 404080, 404081,
404082, 404083, 404084, 404085,
404086, 404087
404087 Series LED Tuin Lamp Calluna
Included with the item
Installation
-
Separate the power plug from the power supply system and turn the power supply off. Remove
the bulb holder from the bottom of the outdoor light by undoing the three mounting screws. -
Turn the transparent cover of the lamp anti-clockwise. The cover can be removed now.
-
Screw in the bulb (E27). The lamp may only be used with lamps: E27, max. 11,5 W, 240V ~ 50Hz.
Pay attention to the maximum installation length of 138 mm. -
Turn the transparent cover back on the lamp. Ensure that the black rubber seal is located exactly in the designated groove. Put the bulb holder back in and put the three mounting screws in a tightening torque of 1,2 NM back in place. Be fore connecting the light again please check on all the voltage carrying parts of the lighting system. Do not put damaged lights back into operation.
MÜLLER-LICHT International GmbH
Goebelstraße 61/63, 28865 Lilienthal
Germany
www.hey-tint.com
Tel. 00800 44003311
Find us on