Einhell TC-PH 150 Compressed Air Hose Reel Instruction Manual
- June 4, 2024
- Einhell
Table of Contents
Original operating instructions
Compressed-Air Hose Reel
TC-PH 150
Danger!
When using the equipment, a few safety precautions must be observed to avoid
injuries and damage. Please read the complete operating instructions and
safety regulations with due care. Keep this manual in a safe place, so that
the information is available at all times. If you give the equipment to any
other person, hand over these operating instructions and safety regulations as
well. We cannot accept any liability for damage or accidents which arise due
to a failure to follow these instructions and the safety instructions.
Explanation of the symbols used (see Fig. 3)
- Danger! – Read the operating instructions to reduce the risk of injury.
- Caution! Wear ear-muff s. The impact of noise can cause damage to hearing.
- Caution! Wear gloves.
- Caution! Wear safety goggles. Sparks generated during working or splinters, chips, and dust emitted by the device can cause loss of sight.
Safety regulations
Warning!
Read all the safety information, instructions, illustrations, and technical
data provided on or with this power tool. Failure to adhere to the following
instructions may result in electric shock, fire, and/or serious injury.
Keep all the safety information and instructions in a safe place for future
use.
- After use, switch off the compressed air and empty the hose, making it easier to roll the hose up.
- The equipment must only be operated at an ambient temperature of +5°C to +40°C. The hose must not be exposed to direct sunlight, as otherwise, this can result in damage to the hose.
- Do not expose the equipment to rain. Never use the equipment in damp or wet locations.
- After use, the hose of the hose reel must be disconnected from the compressor.
- Protect the hose from heat, oil, and sharp edges.
- If the hose reel is not required, the hose should always be rolled up!
Layout and items supplied
2.1 Layout (Fig. 1)
- Connecting hose
- Hose
- Hose reel
- Mounting bracket
- Suspension eyelet
- Hose stopper
- Accessories hook
- Quick-lock coupling
- Screw
- Plastic wall plug
2.2 Items supplied
Please check that the article is complete as specifi ed in the scope of
delivery. If parts are missing, please contact our service center or the sales
outlet where you made your purchase at the latest within 5 working days after
purchasing the product and upon presentation of a valid bill of purchase.
Also, refer to the warranty table in the service information at the end of the
operating instructions.
- Open the packaging and take out the equipment with care.
- Remove the packaging material and any packaging and/or transportation braces (if available).
- Check to see if all items are supplied.
- Inspect the equipment and accessories for transport damage.
- If possible, please keep the packaging until the end of the guarantee period.
Danger!
The equipment and packaging material are not toys. Do not let children play
with plastic bags, foils, or small parts. There is a danger of swallowing or
suffocating!
- Original operating instructions
- Screw (3x)
- Plastic wall plug (3x)
Proper use
The hose reel is designed to increase the working range of your compressor.
The equipment is to be used only for its prescribed purpose. Any other use is
deemed to be a case of misuse. The user /operator and not the manufacturer
will be liable for any damage or injuries of any kind caused as a result of
this. Please note that our equipment has not been designed for use in
commercial, trade, or industrial applications. Our warranty will be voided if
the machine is used in commercial, trade, or industrial businesses or for
equivalent purposes.
Technical data
Max. permitted pressure: ……………………… 16 bar
Hose length: ………………………………….15 + 1.5 m
Weight: ……………………………………………… 5.8 kg
Before using the equipment for the first time
5.1 Assembly (Fig. 2)
The hose reel can either be suspended by the suspension eyelet (5) or attached
to a wall or ceiling using the mounting bracket (4).
Danger! Before drilling any holes, make sure that there are no electric cables
or other installations (e.g. water pipes) where you are drilling. Ensure that
the unit is secured firmly on the wall and that it is horizontal. Only use
suitable fastening materials and make sure that the wall is capable of bearing
the load.
The supplied wall plugs and screws are suitable for the following:
Concrete is a natural stone with a dense structure, solid bricks, solid
limestone bricks, solid lightweight concrete bricks, and aerated concrete.
5.2 Connections
Hose (1) to the connection on the compressor Hose (2) to the connection on the
compressed air tool
Operation
6.1 Uncoiling
Pull out the hose (2) to the desired length from the hose reel (3). The length
of the hose will automatically be locked if you let go of the hose (2) while
the grating sound is audible.
6.2 Coiling up
The lock can be released with a short pull on the hose (2). Then feed the hose
(2) evenly back into the hose reel.
The position of the hose stopper (6) can be adjusted to suit the required hose
length. No tools are required for this.
Warning! The locking mechanism generates a grating sound when the hose is
being uncoiled or coiled back up.
Cleaning, maintenance, and ordering of spare parts
7.1 Cleaning
- Keep all safety devices, air vents, and motor housing free of dirt and dust as far as possible. Wipe the equipment with a clean cloth or blow it with compressed air at low pressure.
- We recommend that you clean the device immediately each time you have finished using it.
- Clean the equipment regularly with a moist cloth and some soft soap. Do not use cleaning agents or solvents; these could attack the plastic parts of the equipment. Ensure that no water can seep into the device. The ingress of water into an electric tool increases the risk of an electric shock.
7.2 Maintenance
There are no parts inside the equipment which require additional maintenance.
7.3 Ordering spare parts and accessories
Please provide the following information when ordering spare parts:
- Type of unit
- Article number of the unit
- ID number of the unit
- Spare part number of the required spare part
For our latest prices and information please go to www.Einhell- Service.com
Disposal and recycling
The equipment is supplied in packaging to prevent it from being damaged in transit. The raw materials in this packaging can be reused or recycled. The equipment and its accessories are made of various types of material, such as metal and plastic. Never place defective equipment in your household refuse. The equipment should be taken to a suitable collection center for proper disposal. If you do not know the whereabouts of such a collection point, you should ask your local council offices.
Storage
Store the equipment and accessories in a dark and dry place at an above-
freezing temperature. The ideal storage temperature is between 5 and 30 °C.
Store the electric tool in its original packaging.
The reprinting or reproduction by any other means, in whole or in part, of
documentation and papers accompanying products, is permitted only with the
express consent of the Einhell Germany AG.
Subject to technical changes
Warranty certificate
Dear Customer,
All of our products undergo strict quality checks to ensure that they reach
you in perfect condition. In the unlikely event that your device develops a
fault, please contact our service department at the address shown on this
guarantee card. You can also contact us by telephone using the service number
shown. Please note the following terms under which guarantee claims can be
made:
-
These guarantee terms apply to consumers only, i.e. natural persons intending to use this product neither for their commercial activities nor for any other self-employed activities. These warranty terms regulate additional warranty services, which the manufacturer mentioned below promises to buyers of its new products in addition to their statutory rights of guarantee. Your statutory guarantee claims are not affected by this guarantee. Our guarantee is free of charge to you.
-
The warranty services cover only defects due to material or manufacturing faults on a product which you have bought from the manufacturer mentioned below and are limited to either the rectifi cation of said defects on the product or the replacement of the product, whichever we prefer. Please note that our devices are not designed for use in commercial, trade, or professional applications. A guarantee contract will not be created if the device has been used by commercial, trade, or industrial businesses or has been exposed to similar stresses during the guarantee period.
-
The following are not covered by our guarantee:
– Damage to the device caused by a failure to follow the assembly instructions or due to incorrect installation, a failure to follow the operating instructions (for example connecting it to an incorrect mains voltage or current type), or a failure to follow the maintenance and safety instructions or by exposing the device to abnormal environmental conditions or by lack of care and maintenance.
– Damage to the device caused by abuse or incorrect use (for example overloading the device or the use of unapproved tools or accessories), ingress of foreign bodies into the device (such as sand, stones or dust, transport damage), the use of force or damage caused by external forces (for example by dropping it).
– Damage to the device or parts of the device caused by normal or natural wear or tear or by normal use of the device. -
The guarantee is valid for a period of 24 months starting from the purchase date of the device. Guarantee claims should be submitted before the end of the guarantee period within two weeks of the defect being noticed. No guarantee claims will be accepted after the end of the guarantee period. The original guarantee period remains applicable to the device even if repairs are carried out or parts are replaced. In such cases, the work performed or parts fitted will not result in an extension of the guarantee period, and no new guarantee will become active for the work performed or parts fitted. This also applies if on-site service is used.
-
To make a claim under the guarantee, please register the defective device at: www.Einhell-Service.com. Please keep your bill of purchase or other proof of purchase for the new device. Devices that are returned without proof of purchase or without a rating plate shall not be covered by the guarantee, because appropriate identification will not be possible. If the defect is covered by our guarantee, then the item in question will either be repaired immediately and returned to you or we will send you a new replacement.
Of course, we are also happy off er a chargeable repair service for any defects
which are not covered by the scope of this guarantee or for units that are no
longer covered. To take advantage of this service, please send the device to
our service address.
Also refer to the restrictions of this warranty concerning worn parts,
consumables, and missing parts as set out in the service information in these
operating instructions.
Art.-Nr.: 41.380.05
I.-Nr.: 21011
Anl_TC_PH_150_SPK13.indb 2
29.10.2021 11:08:34
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>