FAME DD6600 Digital Drum Set Instruction Manual

June 13, 2024
Fame

FAME DD6600 Digital Drum Set

FAME-DD6600-Digital-Drum-Set

Product Information: FAME Digital Drum DD6600

Thank you for choosing the FAME Digital Drum DD6600! This electronic drum set is designed to simulate artificial drum sounds when the pads are struck. It comes with an electronic module that offers various drum sound options and can be played using headphones or external speakers. FAME products are known for their high quality at an affordable price.

Guarantee
The current general terms and conditions and guarantee conditions of Music Store professional GmbH apply. You can view them at www.musicstore.de. If you have any questions or suggestions, please contact Music Store professional GmbH:

Scope of Delivery

  • 1x Digital Drum Set
  • 1x Manual

Intended Use

The FAME DD6600 electronic drum set is intended for use as an electronic drum set. It should be operated by trained and expert users who are in full possession of their mental, physical, and sensory abilities. The product should only be used under the supervision or instruction of a person responsible for safety.

Safety Instructions

  • Electro Magnetic Interference: The product may be disturbed by strong electro magnetic interference. If this occurs, refer to the owner’s manual for instructions on resetting the product. If the issue persists, try using the product in a different location.
  • For Babies and Children: Dispose of or store packaging material properly to prevent suffocation hazards for babies and children. Ensure that children do not use the device unattended or remove small parts that could be swallowed.
  • Electric Shock due to High Voltages: Do not remove the housing of the device. There are components inside that are under high electrical voltage. Check the device for damage or missing components before each use. If any issues are found, do not use the device and contact a qualified service workshop or your dealer for maintenance or repair.
  • Electric Shock due to Short Circuit: Modifying the power cord or plug is prohibited. If the power cord is damaged, it should be immediately replaced with an original spare part from the manufacturer to avoid fire or electric shock hazards.
  • Damage to Hearing: The unit may generate volumes that can cause temporary or permanent hearing loss. Reduce the volume if ear noise or hearing loss occurs. If necessary, maintain a greater distance from the unit or use adequate hearing protection.

Congratulations on your new FAME Digital Drum DD6600!
Thank you for choosing a FAME product. Thanks to efficient development and economical production, FAME makes high-quality products at a fantastic price possible. Please read these operating instructions carefully to be informed about all functions of this product and keep them for future reference
Have fun with your new product! Your FAME Team

Guarantee:
The current general terms and conditions and guarantee conditions of Music Store professional GmbH apply.
Can be viewed under: www.musicstore.de
If you have any questions or suggestions, please contact us:
Music Store professional GmbH Istanbulstr. 22-26 51103 Köln Managing Director: Michael Sauer WEEE-Reg.-Nr. DE 41617453
Tel: +49 221 8884-0 Fax: +49 221 8884-2500 info@musicstore.de

DD6600

Scope of delivery:

Quantity Content

1x

Digital Drum Set

1x

Manual

Intended use:
The product FAME DD6600 was designed for use as an electronic drum set. By striking the pads, an electronic module simulates an artificial drum sound in various forms and can optionally be played via headphones or external speakers. Incorrect use of the product is considered improper and can lead to physical injury or property damage. Damage resulted by improper use is not liable.
It must be ensured that the device is operated exclusively by trained and expert users who are in full possession of their mental, physical and sensory abilities. Use of other persons is expressly permitted only at the request of a person responsible for their safety who instructs or supervises the use.
Attention! Pleasetightenthemeshheadsproperlyafterassembly!

42

ENGLISH DEUTSCH

Important safety instructions! Please read before connection!
CAUTION! (Electro Magnetic Interference) The normal function of the product may be disturbed by Strong Electro Magnetic Interference. If so, simply reset the product to resume normal operation by follo wing the owner`s manual. In case the function could not resume, please use the product in other location.
DANGER! (For babies and children) Dispose of or store any packaging material properly! Packaging material must be kept out of the reach of babies and children due to the danger of suffocation. Make sure that children never use the device unattended! In addition, make sure that children do not remove (small) parts from the device, as they could suffocate by swallowing parts!
DANGER! (Electric shock due to high voltages in the device) The housing must not be removed! There are no parts to be maintained in the device. Inside the unit there are components which are under high electrical voltage.
Before each use, check the device for damage or the absence of components, protective devices or housing parts. If this is the case, do not use the device!
Leave maintenance and repair work to a qualified service workshop or contact your dealer.
DANGER! (Electric shock due to short circuit) Modifications to the power cord or plug are prohibited. If the power cord is damaged, it must be replaced immediately with an original spare part from the manufacturer. Failure to do so may result in fire or death due to electric shock!
WARNING! (Damage to hearing) The unit may generate volumes that may cause temporary or permanent hearing loss. Over time, even seemingly uncritical levels can cause hearing damage. Reduce the volume immediately if ear noise or hearing loss occurs. If this is not possible, keep a greater distance or use adequate hearing protection.
Hint! (Fire hazard due to overheating) The maximum permissible ambient temperature of this device is 40°C. Ensure that the unit is placed in a place with adequate ventilation, out of the reach of direct heat sources, naked flames and combustible materials and liquids.
The ventilation slots of the device must not be taped or covered.
Hint! (Operating) All connections of the device should be made before switching on. Use only high quality cables for the connections.
43

DEUTSCH ENGLISH

Hint! (Operating conditions) Due to its structural characteristics, the device is designed for indoor operation (IP20). Never expose the device to rain, moisture or liquids as this may cause damage. Vibrations, dust or solar radiation can also lead to damage, avoid them! Do not apply excessive force to the switches or controls. Do not let paper, metallic, or other objects into the instrument. If this happens, remove the electric plug from the outlet. Then have the instrument inspected by qualified service personnel. Disconnect all cables before moving the instrument.
Hint! (Power supply) It is essential that you check that the device voltage matches your local mains voltage. It is highly recommended that you fuse your mains socket with a residual current circuit breaker (FI). Please connect the designated AC adaptor to an AC outlet. If you do not use your device for a longer period of time, disconnect it from the power supply in order to minimize danger. The same applies to storm conditions such as thunderstorms, floods, etc.
Hint! (Using racks) As soon as the unit is mounted on a rack, it must always be ensured that it is stable and secure.
Hint! (Possible damage due to magnetic fields) Loudspeakers generate a static magnetic field. Please keep an appropriate distance from other equipment that may be affected or damaged by an external magnetic field.
Hint! (Installation) Be sure to inspect the device for damage before using. Optimum use of the original packaging or suitable transport or storage packaging to protect the pro duct when not in use optimally against influences such as dust or moisture, etc.
Hint! (Interferences with other electrical devices) Radios and televisions placed nearby may experience reception interference. Operate this unit at a suitable distance from radios and televisions. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
44

ENGLISH DEUTSCH

THE FCC REGULATION WARNING (for USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
Unauthorized changes or modification to this system can void the user`s authori ty to operate this equipment.
Symbols on device and packaging: The lightning flash symbol warns the user about non-insulated current and the risk of electrocution The exclamation mark symbol warns the user about important maintenance and operating instructions in the manual
Intended for indoor use
Read manual

Main Features:
Bring the Professional Experience to Your Performance Natural and Realistic Voices This digital drum has equipped with all new voices, which vastly improved sound quality and will reach a super natural and realistic sense for your ears. No matter playing the stroke roll or striking pads with velocity dynamic, all of these let you enjoy delicate nuances and natural voice, capture the unique characteristics of acoustic drum kit. Fashionable Appearance Compact, elegant appearance, only occupy a little place when fold it up. Except for a perfect learning assistant, it also can be exquisite furniture decorated in your house. Amazing DBT Function Easy to achieve double bass pedal techniques here. The frequency is adjustable. Scientific COACH Practicing Provide three coach modes with dozens of common beat practice. Automatically score function intuitively reflects practice condition. USB MIDI Output This digital drum equipped with an USB MIDI output, it is available to connect with smart devices, such as an iPad, through a Camera kit.
Panel & Display Description: Front Panel:
47

DEUTSCH ENGLISH

1. [VOLUME] Knob Adjust the output volume level. Note: Rotate the [VOLUME] knob anticlockwise to the minimum position before power on.

11. [DRUM OFF] Button Mute the drum part of the pattern.
12. [UTILITY] Button Enter the utility mode.

2. [POWER] Button Press this button to power on/ off the module.
3. [KIT/VOICE] Button Shortly press: enter drum kit mode. Press and hold: enter voice mode.
4. [SONG/REC] Button Shortly press: enter the song mode. Press and hold: enter the quick record mode.

13. []/[] Buttons Gradually increasing or decreasing the value of settings.
14. [PAGE] Button Switch between the settings of different functions.
15. [SAVE/ENTER] Button Save the drum kit / pad settings.

5. [START/STOP] Button Start / Stop playing songs.
6. [CLICK] Button Start/Stop the metronome; enter the metronome parameter setting mode.

16. DATA DIAL Use this to select drum kits or to quick edit values (increase/decrease values).

7. LCD Display Shows the name and parameter settings of Kit, Voice, Song and so on.

8. [TEMPO] Button Adjust the tempo value.

9. [DBT] (DOUBLE BASS TRIGGER) Button Turn DBT function on/ off. *Turn DBT function on. It can generate two or three continuous kick sounds when you step on the bass drum only once. Easy to achieve double bass pedal techniques.

10. [COACH] Button Enter learning mode.

ENGLISH DEUTSCH

48

Side Panel:

17. DC IN jack

21. MIDI OUT Terminal

Connect the AC adaptor here. Plug the AC adap- Use this to connect extra MIDI sequencer.

tor cable into the DC IN jack.

you can send MIDI data to an extra MIDI device

or a PC/laptop.

18. PHONES jack (1/8″)

Connect stereo headphones here.

22. OUTPUT jack (L/MONO, R) (2 x1/4″)

Connect to your audio system or amplifier.

19. AUX IN jack (1/8″)

For stereo output use both the L/MONO and R

For connecting an extra audio player, for example, jacks. For monaural output use the L/MONO jack

MP3 and so on via a stereo plug. You can enjoy

playing the drum along with your favorite songs. 23. CRASH 2 jack (1/4″)

This allows you to connect additional Crash 2.

20. USB MIDI Terminal

Connect the PC/USB host with audio devices. 24. TOM 4 jack (1/4″)

Note:

This allows you to connect additional Tom 4.

Only transmit MIDI data.

LCD Display:
1. Mode Display the current mode, such as KIT, VOICE, SONG, and UTILITY and so on. 2. Coach Mode Display current beat accuracy and rhythm type.

3. The Second Level Mode It depends which mode is activated, the LCD displays will show the current mode.
4. External Device and Strike Strength Display the connected external device and current striking strength.
5. Pad Name Display the current selected pad name.
6. Parameter Type Display current parameter type, for instance, Volume, Curve and so on.
7. Parameter Value Display the value which corresponding to the parameter or the number of Song/Kit/Voice.

49

DEUTSCH ENGLISH

Setup:
Caution!
To prevent electric shock and damage to the device, make sure the power is switched OFF on the drum and all related device before making any connection.

Connecting the Pads and the Pedals
Standard configuration:

KICK, SNARE (Double trigger), TOM 1~3, CRASH 1 (Choke), RIDE (Choke), HI-HAT, PEDAL (HI-HAT).

Note: 1.
2.

Using the cables provided, connect each Trigger input jack on the rear panel of the module, and make sure each pad is connected to its corresponding trigger input jack. For details on assembling the drum stand, attaching the digital drum and connecting pads, refer to the Installation Manual description.

ENGLISH DEUTSCH

Getting ready to play:
Setting up the power supply
1. Connect the DC plug of the AC power adaptor to the DC IN jack on the side panel. 2. Connect the other end of the power cord to the AC outlet.
Notes: 1. Only use the voltage specified as correct for the drum module. 2. Even when the module is turned off, electricity is still flowing to the module at the minimum
level. When you are not using the drum module for a long time, make sure to unplug the AC power adaptor from the wall AC outlet.
Turning the Power on
1. Please make sure that the volume has been adjusted minimize.
2. Press the [POWER] button. 3. Listen through the headphone. 4. Striking the pads and adjust the volume by slowly turning
the [VOLUME] knob toward the right direction. Keep turning until you get an appropriate value.
Note: Make sure that you have made all necessary connections right (trigger, audio and so on), turn down all volume controls of the module and other audio equipments.
Turning the Power off
1. Minimize the volume of the module and connected audio devices.
2. Turn the connected external audio device off. 3. Press the [POWER] button again.
Note: The drum module automatically saves all current settings before it turns off, you can also restore the factory setting by the following steps: a) Press the []/[] buttons simultaneously. b) Press the [POWER] button. c) When the LCD displays “FAC SET”, it indicates the factory setting is finished.
About the Auto Power Off Function
To prevent unnecessary power consumption, this function automatically turns the power off if no buttons or keys are operated for approximately 30 minutes. If desired, you can disable or enable this function. Refer to Utility Settings.
51

DEUTSCH ENGLISH

Quick Play: Drum Kits and Voices
An acoustic drum has only a fixed kit, but the digital has a lot. It is a particular characteristic of digital drum. The structure of a drum kit is shown on the right:
1. Shortly press the [KIT/ VOICE] button, enter the drum kit menu. The screen is shown on the right:
2. Press the []/[] button or turn the [DIAL] to select your desired drum kit. (Refer to Drum Kit List)
Selecting a Voice: While striking the pads, you can enjoy the ensemble sound effect. If you are not satisfied with the voice of any pads, change the voice as you want. 1. Press the [KIT/ VOICE] button for 2 seconds to enter the
voice menu. The screen displayed is shown on the right: 2. Strike the pad you want. The screen will display the name
of current pad. 3. While striking the pad, press the []/[] button or turn the
[DIAL] until you get an appropriate voice for your pads. (Refer to Voice List)
52

ENGLISH DEUTSCH

Playing Techniques:
This section introduces various performance functions to make your performance professional. Similar to an acoustic drum kit, the digital drum responds differently to various playing techniques and dynamics. All the pads are velocity sensitive. And some voices change timbre depending on the striking force.
Pad Only the snare drum can detect both head shot and rim shot.
Head Shot Strike only the head of the pad.
Rim Shot Strike the head and the rim of the pad simultaneously. Or you can only strike the rim of the pad.
Cymbal
Cymbal Bow shot Playing the middle area of the cymbal.
Choke Play Both Ride and Crash cymbals have cymbal choke. But hi-hat don`t have the cymbal choke. Choking the crash/ride edge with the hand immediately after hitting the crash/ride mutes the crash/ride sound.
Hi-Hat
Hi-Hat Pedal Change With different positions the pedal pressed down, the voice of pad varied while you are striking the Hi-Hat pad. And this is similar to an acoustic drum.
Open Hi-Hat Strike the Hi-Hat pad without pressing the pedal.
Closed Hi-Hat Strike the Hi-Hat pad with the pedal pressed completely down.
Hi-Hat Pedal Press down the hi-hat controller’s pedal to create a foot-close sound without having to strike the hi-hat pad.
Splash Playing the hi-hat with the pedal fully pressed and then instantly opening it.
53

DEUTSCH ENGLISH

Select a Preset Drum Kit and Create a User Drum Kit
About the Preset and User Drum Kit
From No.1 to 30 are preset drum kits, and the drum kits from No.31 to 40 are user drum kits. You can edit the parameters of drum kit (from No.1-30), and save them into user drum kits (from No.31-40).
Note: Please save your own parameter or voice after edited, otherwise, all data will lost.

Edit the Drum Kit Parameters Change the drum kit volume, the overall effect of drum kit will be affected. It means if you increase the volume of drum kit, all volume of the pads will be increased.
1. Press the [KIT] button, the LCD will display the kit menu.
2. Repeatedly press the [PAGE] button to select the item that you want to edit.

Parameter KIT NAME
VOLUME

Value
Preset: 1~30 User: 31-40 0~127

LCD Display NUM XXX
VOL XXX

Description Drum kit selection.
Adjust the volume of drum kit; the volume of each pad will be changed.

3. Press the []/[] button or turn the [DIAL] to adjust parameter value.

ENGLISH DEUTSCH

Edit the Voice Parameters Edit parameters of one pad will not affect others. For example, if you increased the volume of snare, the other pads wouldn’t change.
1. Press the [KIT/VOICE] button for 2 seconds and the LCD will display the voice menu.
2. Strike the pad that you want to edit. 3. Repeatedly press the [PAGE] button to select an
item you want.

Parameter VOICE NAME VOLUME

Value 1~408 0~127

LCD Display NUM XXX VOL XXX

Description
Select a voice. Adjust the volume of voice.

Triggers
KIK (KICK), Sn (Snare), SnR (Snare Rim), T1 (Tom1), T2 (Tom2), T3 (Tom3), T4(Tom4), HH (Hi-hat), C1 (Crash1), C2(Crash2), Rd (Ride), Pd (Hi-hat Pedal), PS (Hi-hat Splash)

54

4. Press the []/[] button or turn the [DIAL] to adjust parameter value.
Save User Drum Kit 1. While in the drum kit and voice edit menu, press the
[SAVE/ ENTER] button to save all changes.
2. Use the []/[] button or turn the [DIAL] to select a user drum kit (From NO.31 to 40). The number of kit starts flashing at the same time.
3. Press the [SAVE/ ENTER] button again; the LCD will display “OK”, which indicates all data has been saved successfully.

DEUTSCH ENGLISH

Playing Along with a Song
In order to have a better performance experience, a variety of styles can be selected. Each one offers you to practice. (Refer to the Song List) You can play the drums while listening to one of these songs. A song contains Drum part and Accompaniment part. Drum part means the rhythm you played on the pads; the Accompaniment part means percussion and melody. The volume of each part can be adjusted.
Playing Along with a Song
1. Press the [SONG] button to enter the selection menu.
2. Repeatedly press the [PAGE] button to select the parameter that you want to edit.

Parameter

Value

SONG SELECT ACC VOLUME DRUM VOLUME

1~85 0~8 0~8

LCD Display NUM XXX ACC XXX DRM XXX

Description Select a song. Adjust the background volume. Adjust the drum volume.

55

3. Use the []/[] button or turn the [DIAL] to adjust the parameter value. Press the []/[] buttons simulta neously to mute songs.
4. Press the [START/STOP] button to play/stop songs.

Muting the Drums in Songs Press the [DRUM OFF] button to enable and disenable the drum mute function. When DRUM OFF is enabled, the LED will turn on.
Metronome Practicing with the metronome is the best way to follow the beats. Choose a right tempo for your learning/ performance require.
Starting/ Stopping the Metronome and Its Feature 1. Press the [CLICK] button. The metronome will
start playing, and the light of the [CLICK] button will blink with the tempo. 2. Repeatedly press the [PAGE] button to select the parameter you want to edit. Adjustable parameters are shown below:

Parameter TIME SIGNATURE INTERVAL
VOLUME NAME

Value
0-9/2, 0-9/4, 0-9/8, 0-9/16 1/2,3/8,1/4, 1/8,1/12,1/16 0~5
1~6

LCD Display SIG XXX

Description Adjust the time signature.

SIG XXX

Adjust the rhythm interval.

VOL XXX NUM XXX

Adjust the volume of metronome. Select the metronome voice.

3. Use the []/[] button or turn the [DIAL] to change the parameter value.
4. Press the [CLICK] button again to stop the metronome, the light will be off.

56

ENGLISH DEUTSCH

Record
This digital drum offers you easily record your own performance. Maximize 2500 notes could be recorded in one user song. Preparing and starting record, refer to the details bellow:
Preparing Record 1. Press the [SONG/REC] button for 2 seconds to
enter the Recordprepare mode, the light of the [SONG/REC] button start flashing, please select which user songs(81-85) you want to record. 2. Press the [ST/SP] button, the LCD displays “RDY—“. It means the record is standby. If you want to exit the record-prepare mode, press the [SONG]/ [KIT] button.
Start / Stop Recording 1. You can start recording in real time while in the
preparing record menu, there are two ways to start record: · Press the [ST/SP] button. · Strike one pad.
2. Recoding begins after 4 beats count-in.
3. While recording, the light of the [SONG/REC] button keeps lighting all the time, and the LCD will display “ING xxx”, the “xxx” means measure number.
4. Press the [ST/SP] button again to stop recording, and the light of the [SONG/REC] button will be off.
5. The system returns to the last option automatically. The LCD will display “NUM 81~85”. Press the [ST/SP] button to play back the recorded song.
Note: While the record storage capacity is full, the LCD will temporarily display “REC FUL”, the recording stops automatically. The UserKitxx shouldn`t be changed if you use it to record, otherwise the record playback may not be correct.
57

DEUTSCH ENGLISH

Coach
The Coach mode is a unique set of exercises. Specifically designed for those learners who want to build a better tempo, accuracy and stamina, as well as developing a better drum playing skills.

About Coach Mode There are three types of exercises in Coach Mode: Quiet Count, Change Up and Beat Check. Each exercise has its special practicing characteristics. Automatic grading function is available for Change Up and Beat Check types. Try to get a perfect score of 100!
Coach Mode Control 1. Press the [COACH] button to enter coach mode.
Then repeatedly press the [PAGE] button to shift coach type among Quiet Count, Change Up and Beat Check. In the meantime, you can set the accent beat prompt for MEA. According to your present playing skills, select an appropriate coach type to practice.

Coach type Quiet Count Change Up Beat Check Measure Hint

LCD Display QUT CNt CHG UP BEA CHE MEA

Description
This helps to develop a good sense of time/ tempo. There are 3 types of quiet mode and 5 selectable rhythm types.
3 types of rhythm pattern to train your beat accuracy. The rhythm type will change every two measures.
Only metronome accuracy practice. There are 13 selectable rhythm types.
Turn on/off accent hint.

2. Press the [SAVE/ ENTER] button to enter the selected coach type.
3. Use the [PAGE] button to select relevant parameters. Throughout the Coach modes, you will discover that some of them have programmable parameters, allowing you to adapt the functions to your specific needs.
4. Press the [TEMPO] button to adjust practice speed at any time.
5. Pay attention to the LCD indicators of hitting accuracy when you are practicing.
Note: 1. Set the automatic grading function to “ON”, only
playing with metronome guidance without bell. 2. Set the automatic grading function to “OFF”, playing
with conventional metronome sound with bell.
6. Press the [COACH] button to exit the Coach Mode.

ENGLISH DEUTSCH

58

QUT CNT (QUIET COUNT) Practice with auto metronome on/ off circularly with several measures to help you develop a good sense of time and tempo.
1. Repeatedly press the [PAGE] button to select quiet count mode.
2. Press the [SAVE/ ENTER] button to enter quiet count mode.
3. Use the [PAGE] button switch between QUT and CNT parameters, press the []/[] button or turn the [DIAL] to select a suitable quiet and count type.Press the [TEMPO] button to adjust practice speed at any time.

Parameter QUT

Range 1~5

Display QUT XXX

CNT

1-1/2-2/1-3

CNT XXX

Description
Use the []/[] button or turn the [DIAL] to select a suitable quiet type.
Use the []/[] button or turn the [DIAL] to select a suitable count type. 1-1: 1 measure counts, 1 measure quiets. 2-2: 2 measure counts, 2 measure quiets. 1-3: 1 measure counts, 3 measure quiets.

4. Press the [ST/SP] button to start practicing. There is a count-in about 1 measure length before starting. Metro nome sound automatically on/ off, you have to catch up with every beat you ought to play, come on!
5. If you want to change another QUT/CNT parameter or just exit coach mode, Firstly, press the [ST/ SP] button again to stop practicing.

Change Up In change up mode, system will automatic change the style every two measures. Starting from half notes, the note values will gradually become shorter, and will then return to half notes; this change in rhythms will be repeated. The icon on the LCD will flash for times when the rhythm type is ready to change.
1. Repeatedly press the [PAGE] button to select change up mode.
2. Press the [SAVE/ ENTER] button to enter change up mode.
3. Use the []/[] button or turn the [DIAL] to select a suitable rhythm pattern.
4. Use the [PAGE] button to switch to score editing, press the []/[] button or turn the [DIAL] to turn score function on/ off. The default score setting is “OFF”.
59

DEUTSCH ENGLISH

Change Up Range

CHG

1~3

SCO

ON / OFF

Display CHG XXX
SCO XXX

Description
Use the []/[] button or turn the [DIAL] to select a suitable rhythm type.
ON: The score setting is on. OFF: The score setting is off.

5. Press the [ST/SP] button to start practicing. There will play a length of one measure count-in before starting. This system automatic change the style every two measures. In addition to, the next rhythm will flash for times on the LCD when the rhythm type is ready to change.
6. If the score setting is “ON”: Auto stops practicing and displays your score after circularly playing several times. Or, Press the [ST/ SP] button to stop practicing and back to the main page of change up without display your score. If the score setting is “OFF”: Press the [ST/SP] button to stop the practicing mode.

Beat Check In order to improve playing accuracy of beat, practice with the metronome basic beat type. If the score function is on, system will display your practicing score after you have finished.
1. Repeatedly press the [PAGE] button to select beat check mode.
2. Press the [SAVE/ ENTER] button to enter beat check mode.
3. Use the []/[] button or turn the [DIAL] to select a beat type to practice. There are 13 beat types to choose from.
4. Use the [PAGE] button to switch to score editing, press the []/[] button or turn the [DIAL] to turn score function on/ off. The default score setting is “OFF”.

Beat Check BEA

Range 1-13

Display BEA XXX

Description

Use the []/[] button or turn the [DIAL] to select a suitable beat type.

SCO

ON / OFF

SCO XXX

ON: The score setting is on.

OFF: The score setting is off.

ENGLISH DEUTSCH

60

5. Press the [ST/SP] button to start practicing. There will play a length of one measure count-in before starting.
6. If the score setting is “ON”: Auto stops practicing and displays your score after circularly playing several times. Or, Press the [ST/SP] button to stop practicing and back to the main page of beat check without display your score. If the score setting is “OFF”: Press the [ST/SP] button to stop the practicing mode.
DBT (Double Bass Trigger)
Normally, it is too hard for beginners to play double bass, almost impossible, but we make it possible now. Turn on DBT function on; it can generate two or three continuous kick sounds when you step on the bass drum only once. Easy to achieve double bass pedal techniques.
Turn the DBT Function On 1. Press the [DBT] button to turn DBT function on.
The [DBT] button lights up. The screen will display “DBT 1-x”. 2. Use []/[] or the [DIAL] to adjust the second trigger time. This setting can be remained even turn the module off.

Parameter Range

Display

Description

BEA

1-1/1-2/

DBT XXX

1. Press the [<]/[>] button or turn the

1-3/1-4

[DIAL] to select a rhythm type.

2. 1=original beat, trigger once.

2=original beat/ 2, trigger once.

3=original beat/ 3, trigger twice.

4=original beat/ 4, trigger three times.

3. Power off protection. This setting can

be remained even turn the module off.

3. As you play the bass drum, it can produce a double bass technique.
4. Press the [DBT] button again, turn DBT function off.
Tempo

Press the [TEMPO] button to adjust the tempo value of
metronome and song playback. 1. Press the [TEMPO] button. 2. Use the []/[] button or the [DIAL] to adjust
tempo value. 3. Without any operation within 3 seconds, the sys-
tem will be back to previous menu automatically.

DEUTSCH ENGLISH

Parameter Tempo

Value 30-280

Display TMP xxx

Description
Both metronome and song playback are based on this tempo value.

61

Utility Mode (UTILITY)

This mode contains two parts: the drum pad trigger settings and drum module settings.

The Drum Pad Trigger Settings As a professional drummer, you may be very pleased to set your drum triggers carefully corresponding to your playing habits and feelings, making your performance more interesting and professional. In the meantime, your digital drum will be more operable.

1. Press the [UTILITY] button, the LCD will display the UTILITY menu.
2. Repeatedly press the [PAGE] button to select the trigger parameters that you want to edit.

The drum pad trigger settings are shown below:

Parameter SENSITIVITY

Value 1~16

XTALK

1~8

CURVE

1~6

RETRIG CANCEL

1~16

MIDI NOTE

0~127

LCD Display SEN XXX XTK XXX
CUR XXX RTG XXX
MID XXX

Description
You can adjust the sensitivity of the pads to accommodate your personal playing habit. Higher sensitivity allows the pad to produce a loud volume even when played softly. Lower sensitivity will keep the pad to producing a low volume even when played forcefully.
This setting avoids “crosstalk”, which means that when you play one pad you can hear a sound coming from another pad. This can happen when two pads are installed on the same stand. In some cases you can prevent crosstalk by increasing the distance between the two mounted pads. For example: If you hit the snare pad and the tom 1 also sounds. While striking the snare pad, gradually increase the “XTALK” value for the tom 1 pad until the tom 1 pad no longer sounds when you hit the snare pad. If you raise the “XTALK” higher, the tom 1 pad will be less prone to receive crosstalk from other pads. Note: If the value is set too high, and two pads are played simultaneously, the one that is struck less forcefully may not sound. Be careful and set this parameter to the minimum value required to prevent crosstalk
This setting allows you to control the relation between playing velocity (striking force) and changes in volume. Adjust this curve until the response feels as natural as possible. Refer to the CURVE description.
This setting avoids “re-triggering”, which means that when you strike a pad once, maybe you can hear two hits coming from one strike. This can happen as the pad oscillate. While repeatedly striking the pad, raise the “Retrig Cancel” value until re-triggering no longer occurs. Although setting this to a high value prevents re-triggering, it then becomes easy for sounds to be omitted when the drums played fast (roll etc.). Set this to the lowest value possible while still ensuring that there is no re-triggering.
MIDI output key mapping

ENGLISH DEUTSCH

62

3. Striking the specified pad, select the pad that you
want to edit. 4. Use the []/[] button or the [DIAL] to adjust the
parameter value.

Note: The Curve descriptions are shown below: Curve 1: The standard setting. This produces the most natural correspondence between playing dynamics and volume change. Curve 2, 3: Compared to Curve 1, strong dynamics produce a greater change. Curve 4, 5: Compared to Curve 1, a soft playing produces a greater change. Curve 6: Very little dynamic response, making it easy to maintain strong volume levels. If you are using a drum trigger as an external pad, these settings will produce reliable triggering.

Default Midi Note:

Trigger Kick Snare Head Snare Rim Tom1 Head Tom2 Head Tom3 Head Tom4 Head

MIDI 36 38 40 48 45 43 41

Trigger

MIDI

Ride Bow 51

Crash1 Bow 49

Crash2 Bow 57

Open Hihat 46

Close Hihat 42

Pedal

44

Hihat Splash 21

DEUTSCH ENGLISH

63

The Drum Module Settings You can go further set the drum module function, do as the procedures shown below:
1. Press the [UTILITY] button, the LCD will display the UTILITY menu.
2. You can repeatedly press the [PAGE] button to select the function menu and use the []/[] button or the [DIAL] to adjust the parameter value.

The setting values of drum module are shown below:

Parameter GM MODE

Range ON/OFF

LCD Display GM XXX

AUTO POWER

30, 60 ,OFF POW XXX

Description
ON: The channel 10 will respond GM drum kit. OFF: The channel 10 will respond local drum kit.
Factory settings, approximately 30 minutes. 30: Automatically turns the power off if no buttons or functions are operated for approximately 30 minutes. 60: Automatically turns the power off if no buttons or functions are operated for approximately 60 minutes. OFF: The power will not power off automatically

ENGLISH DEUTSCH

64

Setup Manual:
WARNING! Drum key can be pinched when adjusting clamps with drum key. Operate carefully. Be careful around pipe ends, inside the pipe, screw ends and metal shavings … etc. May injure your fingers.
65

DEUTSCH ENGLISH

66

ENGLISH DEUTSCH

67

DEUTSCH ENGLISH

68

ENGLISH DEUTSCH

Specifications:

Drum Kits

Kit: 40 (30 Presets + 10 Users) GM Drum Kit: 11 GM Drum Kits

Instruments

Instrument: 408 + 10 Hi-hat Combination

Sequencer

Preset Pattern: 80

User Song: 5

Tick: 192 ticks per beat

Record: Real-time recording

Data Capacity: About 2500 notes per song.

Tempo

30~280

Display

Backlit LCD

Connectors

TRIGGER INPUT Connector(DB25), PHONES, LINE OUT (R, L/MONO), TOM4 CRASH2 MIDI OUT, AUX IN, USB-MIDI

Control Buttons

Power on/off, Master Volume, Click, Kit/ Voice, Save/ Enter, Drum Off, DBT, Coach, Song/ Rec, ST/ SP, Utility, Tempo, +/-, Page, Dial []/[]

Power supply

DC 9V, 500mA

Dimensions & Weight

Dimensions (W x L x H)

125 X 187,5 X 95 mm

Module Weight

0.5 Kg

  • All specifications and appearances are subjects to change without notice.

DEUTSCH ENGLISH

69

Troubleshooting:
The following overview is intended as an aid to rapid troubleshooting. If you are unsure, contact the manufacturer, the dealer or appropriate specialist personnel. Never open the device by yourself!

Symptom Cannot power on It turns off automatically
No sound
No sound when rhythm is playing No sound from the pads

Troubleshooting Make sure the power adaptor is connected properly.
Make sure the batteries are installed correctly.
Make sure the power adaptor is connected firmly.
Make sure the batteries are not loosely installed.
The Auto Power Off function will shut down the digital drum in 30 minutes if it is not used. To disable this function, hold down [START/STOP] button, then turn on the power. Make sure the master volume is not set to “0”.
Make sure the rhythm volume is not set to “0”.
Make sure headphones are not plugged into the phones jack. Make sure the master volume is not set to “0”.
Make sure the rhythm volume is not set to “0”.
Make sure the master volume is not set to “0”.

If the specified corrections have not led to success, please contact our service staff. The contact details can be found at www.musicstore.de

ENGLISH DEUTSCH

70

Cleaning:
A regular cleaning of the device from impurities and dust increases the durability of the product. Always disconnect the device from the power supply before cleaning it! Never clean the appliance wet! Optical lenses should be cleaned with a dry microfiber cloth to optimize light output. Ventilation grilles and openings should always be cleaned of dust and dirt. Suitable compressed air sprays are recommended for this application.
Environmental protection:
The company MUSIC STORE professional GmbH always strives to reduce the burden of packaging to a minimum. The use of environmentally friendly and recyclable materials is of fundamental importance to us. Please recycle the packaging components after use.
Disposal of packaging: Ensure that paper packaging, plastic material, etc. are recycled separately.Observe the labels and the corresponding regulations.
Disposal of batteries: Batteries do not belong in the garbage! Please dispose of batteries in accordance with official regulations at collection points or disposal stations.
Disposal of your old device: Do not dispose of the device with household waste! This device is subject to the WEEE Directive (Waste Electrical and Electronic Equipment) in its currently valid version. The device is to be disposed of by an approved disposal company or your local waste disposal service. The regulations applicable in your country must be observed! Manufacturer: MUSIC STORE professional GmbH, Istanbulstr. 22-26, 51103 Cologne, Germany
71

DEUTSCH ENGLISH

Prompt Messages: Drum Kit List:
72

ENGLISH DEUTSCH

Drum Voice List:
73

DEUTSCH ENGLISH

74

ENGLISH DEUTSCH

75

DEUTSCH ENGLISH

Song List:
76

ENGLISH DEUTSCH

GM Drum Kit List:
77

DEUTSCH ENGLISH

78

ENGLISH DEUTSCH

GM Backing Instrument List:
79

DEUTSCH ENGLISH

MIDI Implementation Chart:

Basic Channel Mode Note Number Velocity After Touch Pitch Bend Control
Change
Program Change System Common System Real Time AUX Messages
O = YES

Function
Default
Changed
Deafult Messages Altered
True Voice
Note on Note off
Keys
Channels
0
1 5 6 7 10 11 64 65 66 67 80 81 91 93 120 121 123
True
Exclusive Song Position
Song Select Tune
Clock
Commands
Local ON/OFF All Notes OFF
Active Sense Reset

Transmitted
10ch
x
x x **
0-127


O 99H, V=1-127 O 99 H, V=0
X
X
X
X
X X X X X X X X X X X X X X X X X
O


X X
X X
O
O
X X
X X

Recognized
1 -16
x
x x **
0-127
0-127
O O
O
X
O
O
O O O O O O O O O O O O O O O O O
O
0-127
O X
X X
X
X
X X
X X

X = NO

Remarks
Bank Select Modulation Portamento Time Data Entry Volume Pan Expression Sustain Pedal Portamento on/off Sostenuto Pedal Soft Pedal Reverb Program Chorus Program Reverb Program Chorus Level All Sound off Reset all Controllers All Notes off
START and STOP only

ENGLISH DEUTSCH

80

Notes
Dokument-ID: MS-DRU0038849-000 (02/2023)
81

DEUTSCH ENGLISH

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals