Fame Audio PP-1 Alimentation Phanthom Instruction Manual

Fame Audio PP-1 Alimentation Phanthom

Product Information

Important Safety Instructions:

• DANGER! The housing must not be removed as there are components under high electrical voltage.
• Before each use, check the device for damage or missing components, protective devices, or housing parts. Do not use the device if any issues are found.
• Leave maintenance and repair work to a qualified service workshop or contact your dealer.
• In case of device malfunction, stop operation immediately and have the device repaired by a specialist.
• Modifications to the power cord or plug are prohibited. Replace the power cord immediately if damaged with an original spare part from the manufacturer.
• Always ensure proper grounding of the device. Use supplied power cables and maintain earthed protective contacts.
• Dispose of or store packaging material properly to prevent suffocation risks for babies and children.
• Ensure children do not use the appliance unattended or remove small parts that can cause suffocation.
• Place the unit in a well-ventilated location away from direct heat sources, naked flames, combustible materials, and liquids.
• Do not cover or insert objects into the ventilation slots of the unit.
• The device is designed for indoor operation (IP20). Avoid exposing it to rain, moisture, liquids, vibrations, dust, or sunlight.
• To avoid condensation in the unit, allow it to adapt to the ambient temperature before use.
• Unwanted odors may occur initially but will disappear after a few minutes.
• Ensure the unit voltage corresponds to your local mains voltage. Use a residual current circuit breaker (FI) for added protection.
• Disconnect the device from the mains during long periods of non-use, maintenance work, or severe weather conditions.

Product Usage Instructions

• Switching On/Off: Do not turn on phantom power until you have properly connected a condenser microphone.
• Power Supply: Check that the unit voltage corresponds to your local mains voltage. Use a residual current circuit breaker (FI) for added protection. Disconnect the device from the mains during long periods of non-use, maintenance work, or severe weather conditions.
• Symbols: The lightning flash symbol warns about uninsulated voltages and the risk of electric shock. The exclamation mark symbol indicates important maintenance and operating instructions in the manual.

Important safety instructions

Please read before connecting!

DANGER! (Electrical shock due to high voltages in the device)
The housing must not be removed! There are no parts to be maintained in the device. Inside the unit, there are components which are under high electrical voltage.

• Before each use, check the device for damage or the absence of components, protective devices or housing parts. If this is the case, the device must not be used!
• Leave maintenance and repair work to a qualified service workshop or contact your dealer. In the case of a malfunction of the device, the operation must also be stopped immediately until the device has been repaired by a specialist!

DANGER! (Electric shock due to short circuit)

• Modifications to the power cord or plug are prohibited. If the power cord is damaged, it must be replaced immediately with an original spare part from the manufacturer.
• Always make sure that the grounding of the device is maintained. Only use the supplied power cables and always maintain the earthed protective contacts on the side. Make sure that the sockets used have a properly functioning protective earth.
• Failure to do so may result in fire or death due to electric shock!

DANGER! (For babies and children)
Dispose of or store any packaging material properly! Packaging material must be kept out of the reach of babies and children due to the risk of suffocation.
Ensure that children never use the appliance unattended! In addition, make sure that children do not remove (small) parts from the device, as they could suffocate by swallowing parts!

Hint! (Fire hazard due to overheating)

• The maximum permissible ambient temperature of this device is 40°C.
• Ensure that the unit is placed in a well-ventilated location away from direct heat sources, naked flames, combustible materials, and liquids. A minimum distance of 1 m is required.
• Do not tape or cover the ventilation slots of the unit, or insert objects into the unit.

Hint! (Operating conditions)

• Due to its structural characteristics, the device is designed for indoor operation (IP20).
• Never expose the unit to rain, moisture or liquids as this may cause damage.
• Vibrations, dust or sunlight can also cause damage, avoid them!

Hint! (Condensation)
To avoid condensation in the unit, the unit should adapt to the ambient temperature before commissioning.

Hint! (Unwanted odours)
A new product can sometimes lead to unwanted odours. This reaction is normal and disappears after a few minutes.

Hint! Hints for switching on/off:
Do not turn phantom power on until you have properly connected a condenser microphone.

Hint! (Power supply)
You must check that the unit voltage corresponds to your local Mains voltage. The protection of your mains socket with a residual current circuit breaker (FI) is strongly recommended. If you do not use your device for a longer period or carry out maintenance work, Disconnect the device from the mains to minimize hazards. The same applies to Severe weather conditions such as thunderstorms, floods, etc.

Symbols on device and packaging:

• The lightning flash symbol warns the user of uninsulated voltages and the risk of electric shock
• The exclamation mark symbol draws the user’s attention to important maintenance and operating instructions in the manual
• The lightning warns you of dangerous voltage accessible from the outside. A connection to any terminal marked with this symbol may only be made with a ready-made cable that complies with the manufacturer’s recommendations or with cables installed by qualified personnel
• Only suitable for indoor use
• Read the manual

Please read and follow the warnings and recommendations carefully to ensure safe and trouble-free use.

Congratulations on your new FAME Audio PP-1!
Thank you for choosing a FAME Audio PP-1 product. Through efficient development and economical production, FAME Audio enables high-quality products at a fantastic price. Please read the instruction manual carefully to learn about all the features of this product and keep it for future use.

Have fun with your new product! Your FAME Audio Team Guarantee:
The current general terms and guarantee conditions of the Music Store Professional GmbH apply. You can view it at: www.musicstore.de  If you have any questions or suggestions, please contact us: Music Store Professional GmbH Istanbulstr. 22-26 51103 Cologne

Managing Director : Michael Sauer WEEE-Reg.-No. DE 41617453

• Tel : +49 221 8884-0
• Fax : +49 221 8884-2500
• info@musicstore.de

Scope of delivery:

Intended use:
The product FAME Audio PP-1 was designed to supply condenser microphones with the necessary 48 V phantom power. The device may only be operated for this purpose and by the operating instructions. Other purposes, as well as operation under other operating conditions, are expressly not intended and can lead to damage to property or personal injury! No liability is assumed for damage resulting from improper use.

It must be ensured that the device is operated exclusively by trained and competent users who are in full possession of their mental, physical and sensory abilities. The use of other persons is expressly only permitted at the request of a person responsible for their safety, who instructs or supervises the use.

Installation

Be sure to check the unit for damage before use. Use the original packaging or a suitable transport or storage packaging to protect the product from dust, moisture, etc. when not in use.

Set up:
All connections of the device should be made before switching on. Only use high-quality, undamaged and as short cables as possible for the connections.

Configuration of the 3-pin XLR connector:

Connections and controls:

Specifications

microphone with a phantom voltage of 48 V

On-/Off Switch| Yes
Case| Aluminium
Colour| Black
Power Supply| Via 18V power supply unit
Connections| XLR-In-/Output (3-pole)
Dimensions (L x W x H)| 100 x 95 x 46 mm
Weight| 0,300 kg

Troubleshooting

The following overview serves as an aid for quick troubleshooting. If you are unsure, contact the manufacturer, the dealer or the corresponding specialist personnel.

No tone

| Check the cable for damage (cuts, extreme kinks,

etc.) and replace them if necessary.

Check the wiring. Connectors must be fully inserted and snap into place!
Check if the 48V phantom power is switched on at the console/interface.
Check the setting of the preamplifier on the console/interface/etc.

Note! (Adjustable characteristics)
When recording, pay attention to the adjustable characteristics and read the instructions in the operating instructions. The adjustable low-cut filter also leads to a different recording result, as sub-bass frequencies are filtered out.

If the specified corrections have not led to success, please contact our service staff. The contact details can be found at www.musicstore.de

Cleaning

• Regular cleaning of the device from dirt and dust increases the shelf life of the product.
• Always disconnect the device from the power supply before cleaning it!
• Never clean the appliance wet! A dry microfibre cloth is best. Ventilation grilles and openings should always be cleaned of dust and dirt.
• Suitable compressed air sprays are recommended for this application.

Environmental protection:
The company MUSIC STORE Professional GmbH always strives to reduce the burden of packaging to a minimum. The use of environmentally friendly and recyclable materials is of fundamental importance to us. Please dispose of and recycle the packaging components after use properly.

• Disposal of packaging:
  Ensure that paper packaging, plastic materials, etc. are separately recycled. Observe the corresponding disposal instructions on the packaging.

• Disposal of batteries:
  Batteries do not belong in the garbage! Please keep batteries at the official collection points or disposal stations according to the specifications.

• Disposal of your old device:
  Do not dispose of the device with household waste! This device is subject to the WEEE Directive (Waste Electrical and Electronic Equipment) in its currently valid version.

The device will be disposed of by an approved waste disposal company or your local waste disposal office. The regulations valid in your country must be observed!

Manufacturer : MUSIC STORE professional GmbH, Istanbulstraße 22-26, 51103 Cologne, Germany

MS ID: REC0014557-000 02/2023

References

• MUSIC STORE - Online Shop für Musikinstrumente - Deutschland | MUSIC STORE professional
• Music Store Online-Shop für Musikinstrumente | MUSIC STORE professional

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>