Rollei 22965 Rock Solid Alpha Mark III User Guide

June 4, 2024
Rollei

Rollei logo

Rock Solid Alpha XL Mark III

Carbon Tripod

Rollei 22965 Rock Solid Alpha Mark III A

User Guide for German

Rollei logo

Rock Solid Alpha XL Mark III

Carbon Tripod

Rollei 22965 Rock Solid Alpha Mark III B

USER GUIDE

Rollei 22965 Rock Solid Alpha Mark III C

Before the First Use

Before using the product for the first time, read the operating instructions and the safety instructions carefully.
Keep the operating instructions together with the product for later use. If other people use this product, please make these instructions available to them. If you pass the product on to third parties, these instructions belong to the product and must be supplied with it.

Components of the tripod
  1. Leveling base with 3/8″ connection
  2. Angle-adjusting Button
  3. Leg
  4. Leg lock
  5. Spikes
  6. Pin foot sole
  7. Hex wrench 3 mm, 2 x hex wrench 4 mm
Technical data

Tripod

Material| Carbon
Min. height| 13 cm
Max. Height| 193 cm
Max. Working height| 193 cm
Pack size| 66.5 cm
Weight| 3.17 kg
Max. Payload| 40 kg
Sections| 4
Tripod leg diameter| 2.8 / 3.2 / 3.6 / 4.0 cm

Packaging details

Box content| 1x Rock Solid Alpha XL, 3x spikes, 3x tripod leg plates, 3x Allen keys (1x 3 mm, 2x 4 mm) 1x manual

Design and technical data are subject to change without notice.

Rollei 22965 Rock Solid Alpha Mark III D3 Rollei 22965 Rock Solid Alpha Mark III D5

User Manual

A Quick locking/releasing legs system
1. Releasing leg lock (4) clockwise within half round to extend or shorten tripod legs. [1]
2. Locking leg lock (4) anticlockwise tightly after extending, shorten or folding legs. [2]

B Adjust legs angle
1. Pull out angle adjusting button, lift legs to needed level. [1]
2. Tripod allows three different angles for different purposes. Press down angle adjusting button to fix the level. [2]

C Leveling base with 3/8“ connection

D Screw on mounting plate
1. Tighten screw at bottom of the mounting plate with the hex screw driver to fix a ball head.

E Change rubber foot to spikes
1. Turn the rubber feet clockwise to loosen. [1]
2. Screw the spikes to the tripod leg plates using the Allen key. [2]

Announcements General information:

  • Temperature range: -40 °C to +100 °C
  • The tripod can be use in sea water
  • If necessary, use the soft towel with moderate detergent to clean the locking system and the gliding parts.
  • If necessary, please use regular lubricants or wax oil.

Rollei GmbH & Co. KG
In de Tarpen 42
D-22848 Norderstedt

Service Hotline
+49 40 270750277

/rollei.foto.de
@rollei_de

Item No.: 22965

www.rollei.de

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals