Belkin F5U234DF Hi-Speed USB 2.0 4-Port Hub User Manual
- June 13, 2024
- belkin
Table of Contents
Belkin F5U234DF Hi-Speed USB 2.0 4-Port Hub
Introduction
Welcome to Belkin USB 2.0!
Congratulations and thank you for purchasing the Belkin Hi-Speed USB 2.0
4-Port Hub (the Hub). The Hub provides four downstream USB ports that offer
backward-compatible, Plug-and-Play connectivity with all USB devices,
including USB 1.1 (or low- and full-speed) devices, as well as with USB 2.0
(or high-speed) devices. This includes such peripherals as scanners, printers,
mass-storage devices, and high-resolution cameras.
The Hub is self-powered, which allows the cascading of devices with additional hubs, so that up to 127 USB devices may be connected to a single port. The Hub is uniquely designed to allow the user to position the four downstream ports toward the back of the desktop for efficient cable management, or to the front of the desktop for easier port access. The Hub also provides a status LED for each individual port and a master power LED.
Overview
Features
- Compliant with Universal Serial Bus specification 2.0 (data rate 1.5/12/480Mbps)
- Backward-compatible with Universal Serial Bus specification 1.1 (data rate 1.5/12Mbps)
- Compatible with Windows® 98 SE, Me, 2000, and XP
- Approved by USB Implementers Forum (USB-IF)
- Supports Plug-and-Play specifications
- Supports “hot swapping” of USB devices
- Over-current detection and protection
- Individual port-status indicator LEDs
- Four 480Mbps downstream ports
- Fully compatible with USB 1.1 and USB 2.0 devices
- Compact, slim-line design
- Multiple hubs may be stacked on top of one another
Package Contents
- Hi-Speed USB 2.0 4-Port Hub
- AC Power Adapter
- User Manual
- USB device cable
Technical Specifications
-
Upstream Ports: (1)
-
Downstream Ports: (4)
-
Power Mode: Self-powered/bus-powered
-
Per-Port Voltage: DC +5V
-
Per Port Current: Self-Powered Mode: 500mA (max)
-
Bus-Powered Mode: 100mA (max) (Ports one and two only)
-
Operating Temperature: 5º C ~ 40º C
Storage Temperature: -20º C ~ 60º C -
Enclosure: ABS
Power Supply
- Output: DC 5V, 2.1A
- Plug Size: 3.5mm (outer), 1.0mm (center)
- Plug Polarity: Center Positive
Main Power LED Color Definitions:
- Off: Not operational
- Red: Operational
Port Status LED Color Definitions:
- Off: Not operational, or no device connected
- Green: Fully operational
- Amber: Over-current condition
Important Note: Please do not connect any USB devices to the Hub until instructed to do so in step 4 of this installation procedure.
Installation
Important Note: Please do not connect any USB devices to the Hub until instructed to do so in step 4 of this installation procedure.
-
Plug the AC adapter into a wall outlet, or surge suppressor. Plug the DC connector into the DC Power Jack found on the side of the Hub.
Important Note: The Hub may be used without the power supply when connecting devices that draw 100mA of current or less, however, only port 1 and port 2 will be functional. -
Plug the flat end of the provided USB device cable into the downstream port of your computer or the downstream port of another hub, then plug the mini 6-pin connector of the device cable into the upstream port on the rear of the Hub.
Important Note: The Hub must be connected to a USB 2.0-compliant host in order to function in high-speed mode (480Mbps data rate). If the Hub is connected to a USB 1.1-compliant host, it will operate only in low-speed or full-speed mode (1.5Mbps/12Mbps). -
Windows will now detect your Hub and install the required driver support. (The Windows “Install New Hardware Wizard” may prompt you to provide your Windows Installation CD to complete the driver installation process). Important Note: High-speed hub drivers are included with most USB 2.0 PCI upgrade cards, and are pre-installed along with the PCI card drivers. If you purchased an upgrade card prior to the release of high-speed hub support, please check with your PCI card vendor for an updated USB 2.0 driver. The Belkin USB 2.0 driver supports all competitive cards based on the NEC host controller with the exception of Adaptec. The most recent Belkin driver is available at www.belkin.com.
-
Plug the USB-A connector of the USB device, or an additional hub, into any of the downstream ports of the Hub.
Important Note: When moving a device from one port on the Hub to another, it may be necessary to reinstall the USB drivers for that device.
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC
COMPATIBILITY
We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare
under our sole responsibility that the product:
F5U234 to which this declaration relates:
Complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
CE Declaration of Conformity
We, Belkin Corporation, declare under our sole responsibility that the F5U234,
to which this declaration relates, is in conformity with Generic Emissions
Standard EN 55022:1998 Class B, EN50081-1 and with Generic Immunity Standard
EN50082-1 1992.
Belkin Corporation Limited Lifetime Product Warranty
Belkin Corporation warrants this product against defects in materials and
workmanship for its lifetime. If a defect is discovered, Belkin will, at its
option, repair or replace the product at no charge provided it is returned
during the warranty period, with transportation charges prepaid, to the
authorized Belkin dealer from whom you purchased the product. Proof of
purchase may be required. This warranty does not apply if the product has been
damaged by accident, abuse, misuse, or misapplication; if the product has been
modified without the written permission of Belkin; or if any Belkin serial
number has been removed or defaced.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
No Belkin dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty.
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH BELKIN PRODUCTS.
Support
- Address: Belkin Corporation 501 West Walnut Street Compton, CA, 90220-5221, USA
- Phone: +1 310 898 1100
- Fax: +1 310 898 1111
Please visit our website www.belkin.com for technical
support or further information.
Disposal of Waste Equipment by Users in Private Households in the European
Union: For more information, go to
www.belkin.com/environmental
Trademarks
© 2006 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Mac OS and Mac are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
FAQs
What is the Belkin F5U234DF USB 2.0 4-Port Hub?
The Belkin F5U234DF is a USB 2.0 hub that provides four additional USB ports for connecting various devices to your computer.
What is the purpose of a USB hub?
A USB hub allows you to expand the number of available USB ports on your computer, making it easy to connect multiple USB devices simultaneously.
Is the Belkin F5U234DF hub compatible with USB 3.0 devices?
The F5U234DF is a USB 2.0 hub and is backward compatible with USB 1.1 devices, but it does not support the faster data transfer rates of USB 3.0.
How do I connect the hub to my computer?
Simply plug the hub into an available USB port on your computer using the provided USB cable. It's a plug-and-play device and doesn't require additional drivers.
Can I use this hub with both Windows and Mac computers?
Yes, the Belkin F5U234DF hub is compatible with both Windows and Mac computers, providing cross-platform support.
Does this hub require an external power source?
No, the hub is bus-powered, meaning it draws power from the computer's USB port and doesn't require an external power adapter.
What is the maximum data transfer rate of the F5U234DF hub?
This USB 2.0 hub supports a maximum data transfer rate of up to 480 Mbps, suitable for most USB 2.0 and 1.1 devices.
Is there any built-in protection or surge protection in this hub?
The F5U234DF hub does not typically include built-in surge protection. If surge protection is necessary, consider using a surge protector for connected devices.
Can I use this hub with external hard drives or other high-power devices?
This hub is best suited for low-power devices like mice, keyboards, and flash drives. It may not provide sufficient power for some external hard drives.
Is it possible to daisy-chain multiple hubs together?
Daisy-chaining USB hubs is generally not recommended, as it can lead to power and data transfer issues. It's better to connect devices directly to your computer when possible.
What is the warranty for the Belkin F5U234DF USB 2.0 Hub?
The Belkin F5U234DF USB 2.0 4-Port Hub typically comes with a warranty of Limited Lifetime from the date of purchase.
Is this hub backward compatible with USB 1.1 devices?
Yes, the F5U234DF hub is backward compatible with USB 1.1 devices, allowing you to connect older USB peripherals.
References:Belkin F5U234DF Hi-Speed USB 2.0 4-Port Hub – Device.report