keymaXX SP-11 Digital Piano User Manual

: June 13, 2024
: keymaXX

Table of Contents

keymaXX SP-11 Digital Piano
Product Information
Product Usage Instructions
CONNECTING SOCKET
INSTALLATION
OPERATION GUIDE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

keymaXX SP-11 Digital Piano

Product Information

The key maXX SP-11 E-Piano is a high-quality electronic piano designed and manufactured by key maXX. It offers a fantastic price-performance ratio due to efficient development and economical production. This product provides various functions that will enhance your musical experience.

Product Usage Instructions

Before using the key maXX SP-11 E-Piano, please read and follow these important instructions:

Congratulations: Congratulations on your new key maXX SP-11 E-Piano! Thank you for choosing our product.
User Manual: Read the user manual carefully to familiarize yourself with all the functions of the product. Keep the manual for future reference.
Guarantee: The guarantee conditions of Music Store professional GmbH apply to this product. Refer to www.musicstore.de for more information.
Safety Instructions: Prior to connecting the product, read and understand the important safety instructions provided. Failure to do so may result in malfunction or hazards.
Electro Magnetic Interference: If the product is disturbed by strong electro magnetic interference, reset it by following the owner’s manual. If normal operation cannot be resumed, use the product in a different location.
Babies and Children: Dispose of or store packaging material properly to prevent suffocation hazards for babies and children. Ensure that children do not use the device unattended and prevent them from removing small parts that may cause suffocation if swallowed.
Electric Shock: Do not remove the housing of the device as it contains components under high electrical voltage. Before each use, check for damage or missing parts. If any issues are found, do not use the device and contact a qualified service workshop or your dealer.
Power Cord: Modifying the power cord or plug is prohibited. If the power cord is damaged, replace it immediately with an original spare part from the manufacturer to avoid fire or electric shock hazards.
Hearing Protection: The unit may generate volumes that can cause hearing loss. Reduce the volume if ear noise or hearing loss occurs. If necessary, maintain a greater distance from the device or use adequate hearing protection.
Operating Conditions: The device is designed for indoor operation (IP20) and should not be exposed to rain, moisture, liquids, vibrations, dust, or solar radiation. Avoid applying excessive force to switches or controls and prevent foreign objects from entering the instrument.
Power Supply: Verify that the device voltage matches your local mains voltage. It is highly recommended to fuse your mains socket with a residual current circuit breaker (FI).

By following these instructions, you can ensure safe and optimal usage of your key maXX SP-11 E-Piano. Enjoy your new product!

Congratulations on your new keymaXX SP-11 E-Piano!
Thank you for choosing a keymaXX product. Thanks to efficient development and economical production, keymaXX makes high-quality products at a fantastic price possible.
Please read these operating instructions carefully to be informed about all functions of this product and keep them for future reference
Have fun with your new product!
Your keymaXX Team

Guarantee:
The current general terms and conditions and guarantee conditions of Music Store professional GmbH apply.
Can be viewed under: www.musicstore.de
If you have any questions or suggestions, please contact us:
Music Store professional GmbH Istanbulstr. 22-26
51103 Köln
Managing Director: Michael Sauer WEEE-Reg.-Nr. DE 41617453
Tel: +49 221 8884-0
Fax: +49 221 8884-2500
info@musicstore.de

Intended use:
The keymaXX SP-11 is a digital home keyboard, designed to play sounds on the keyboard and make them audible through built-in speakers or headphones. Improper use of the product is considered improper and can lead to personal injury or property damage. No liability is assumed for damage resulting from improper use.
It must be ensured that the device is operated exclusively by trained and competent users who are in full possession of their mental, physical and sensory abilities. The use by other persons is only permit-ted under the supervision or guidance of a person responsible for their safety.

Important safety instructions! Please read before connection!

CAUTION! (Electro Magnetic Interference)
The normal function of the product may be disturbed by Strong Electro Magnetic Interference. If so, simply reset the product to resume normal operation by following the owner‘s manual. In case the function could not resume, please use the product in other location.

DANGER! (For babies and children)
Dispose of or store any packaging material properly! Packaging material must be kept out of the reach of babies and children due to the danger of suffocation.
Make sure that children never use the device unattended! In addition, make sure that children do not remove (small) parts from the device, as they could suffocate by swallowing parts!

DANGER! (Electric shock due to high voltages in the device)
The housing must not be removed! There are no parts to be maintained in the device. Inside the unit there are components which are under high electrical voltage.
Before each use, check the device for damage or the absence of components, protective devices or housing parts. If this is the case, do not use the device! Leave maintenance and repair work to a qualified service workshop or contact your dealer.

DANGER! (Electric shock due to short circuit)
Modifications to the power cord or plug are prohibited. If the power cord is damaged, it must be replaced immediately with an original spare part from the manufacturer. Failure to do so may result in fire or death due to electric shock!

WARNING! (Damage to hearing)
The unit may generate volumes that may cause temporary or permanent hearing- loss. Over time, even seemingly uncritical levels can cause hearing damage. Reduce the volume immediately if ear noise or hearing loss occurs. If this is not possible, keep a greater distance or use adequate hearing protection.

Hint! (Fire hazard due to overheating)
The maximum permissible ambient temperature of this device is 40°C.
Ensure that the unit is placed in a place with adequate ventilation, out of the reach of direct heat sources, naked flames and combustible materials and liquids.
The ventilation slots of the device must not be taped or covered.

Hint! (Operating conditions)
Due to its structural characteristics, the device is designed for indoor operation (IP20). Never expose the device to rain, moisture or liquids as this may cause damage.
Vibrations, dust or solar radiation can also lead to damage, avoid them! Do not apply excessive force to the switches or controls.
Do not let paper, metallic, or other objects into the instrument. If this happens, remove the electric plug from the outlet. Then have the instrument inspected by qualified service personnel.
Disconnect all cables before moving the instrument.

Hint! (Power supply)
It is essential that you check that the device voltage matches your local mains voltage. It is highly recommended that you fuse your mains socket with a residual current circuit breaker (FI).
Please connect the designated AC adaptor to an AC outlet.
If you do not use your device for a longer period of time, disconnect it from the power supply in order to minimize danger. The same applies to storm conditions such as thunderstorms, floods, etc.

Hint! (Commissioning)
All connections of the device should be made before switching on. Use only high-quality cables for connections.

Hint! (Installation)
Be sure to inspect the device for damage before using. Optimum use of the original packaging or suitable transport or storage packaging to protect the product when not in use optimally against influences such as dust or moisture, etc.

Hint! (Possible damage due to magnetic fields)
Loudspeakers generate a static magnetic field. Please keep an appropriate distance from other equipment that may be affected or damaged by an external magnetic field.

Hint! (Interferences with other electrical devices)
Radios and televisions placed nearby may experience reception interference. Operate this unit at a suitable distance from radios and televisions.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

THE FCC REGULATION WARNING (for USA)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

Symbols on device and packaging:

The lightning flash symbol warns the user about non-insulated current and the risk of electrocution
The exclamation mark symbol warns the user about important maintenance and operating instructions in the manual
Intended for indoor use
Read manual

Cleaning:
A regular cleaning of the device from impurities and dust increases the durability of the product. Always disconnect the device from the power supply before cleaning it! Never clean the appliance wet! Optical lenses should be cleaned with a dry microfiber cloth to optimize light output. Ventilation grilles and openings should always be cleaned of dust and dirt. Suitable compressed air sprays are recommended for this application.

Environmental Protection:
The company MUSIC STORE professional GmbH always strives to reduce the burden of packaging to a minimum. The use of environmentally friendly and recyclable materials is of fundamental importan- ce to us. Please recycle the packaging components after use.

Disposal of packaging:
Ensure that paper packaging, plastic material, etc. are recycled separately. Observe the labels and the corresponding regulations.

Disposal of batteries:
Batteries do not belong in the garbage! Please dispose of batteries in accordance with official regulations at collection points or disposal stations.

Disposal of your old device:
Do not dispose of the device with household waste! This device is subject to the WEEE Directive (Waste Electrical and Electronic Equipment) in its currently valid version.
The device is to be disposed of by an approved disposal company or your local waste disposal service. The regulations applicable in your country must be observed!
Manufacturer: MUSIC STORE professional GmbH, Istanbulstr. 22-26, 51103 Cologne, Germany

CONNECTING SOCKET

POWER LINE CONNECTION
When in use, the power cord is connected according to the figure. One end is inserted into the power outlet in the back socket board, and the other end is inserted into the 110-240V household power outlet. (Fig. 1)
When you do not use this product for a long time, please pull out the plug and keep it properly.
AUDIO INPUT/OUTPUT PLUG
Audio output outlet can be connected with large speaker equipment. (Fig. 2)
Audio input socket can connect external sound source to electric piano for playing. (Fig. 2)
MIDI INPUT/OUTPUT AND USB INTERFACE
MIDI interface and USB interface of digital piano can interact with music equipment with MIDI.Through the pre-installed Music software on computers and tablets, we can learn or play keyboards for playing.
Write music works, storage and other functions. (Fig. 3)
SINGLE PEDAL JACK
Connecting the single pedal socket and then stepping on the pedal can control the delay effect of the digital piano. (Fig. 4)
Note: This socket is a simplified version with only one pedal socket. The 3 pedal socket with wooden footrest is at the bottom of the host.
THREE PEDAL JACK
Insert the pedal wire end plug into the circular socket at the bottom of the piano to connect three pedal sound effect functions. The order is: weak tone, follow-up delayed tone, delayed tone.(Fig. 5)
DOUBLE EARPHONE SOCKET
Connecting the headphone will automatically cut off the output of the built-in speaker of the electronic organ. Playing does not disturb others.This product has two headphone jacks, which can be inserted into two headphones at the same time. (Fig. 6)

INSTALLATION

Left / right supporting plate
Footplate crossbeam
Digital piano
Back fixing plate
Flat head screw M6 *50 = 4 PCS)
Self tapping screw M6 x 60 = 4 PCS
Flat head screw M6 *20 = 4 PCS)

Note!

Simple edition only mainframe, no scaffolding, this assembly drawing is only suitable for the installation with wooden scaffolding!

OPERATION GUIDE

PIANO PERFORMANCE
Push the “POWER” switch to the open position, and you can play on the keyboard.
Turn off the power supply when not in use for the time being.
Processor chips of this product are complex, similar to computer systems. Sometimes they can not respond. Please turn off the power switch and then turn it on to work properly.
VOLUME ADJUSTING
Use the “VOLUME” adjusting knob to increase or decrease the piano volume, please adjust the volume to a satisfactory position.
DEMONSTRATION SONGS
Hold down the “TONE/DEMO” button and press a corresponding “keyboard” in the demo area to play different demo tracks.
Different keyboards correspond to different songs. If you want to choose other tracks, you can repeat the previous step.
Stop playing demo music: Hold down the “TONE/DEMO” button and press the “white key A2” to stop playing demo music.
**Demonstration Song List:

CHOOSING INSTRUMENT TIMBRE
Hold down the “TONE/DEMO” button and press the corresponding one in the timbre area. “White key c4-c5” can play different instrument timbre.
The default is “piano triangle” timbre whenever you are powered.
DOUBLE INSTRUMENT TIMBRE
Hold down the “TONE/DEMO” button and press two arbitrary white keys “c4-c5” in the timbre area to select different timbre effects.
Hold down the “TONE/DEMO” button and press the “white key C5” in the timbre area to turn off the timbre function of double instruments.3. In the dual-instrument timbre mode, holding the “TONE/DEMO” button and pressing the “white key A3 or b3” in the balance area can adjust the volume balance of the timbre of the two instruments.
METRONOME
Hold down the “EFFECT” button and press the “white key F1” to start and close the metronome.
Hold down the “EFFECT” button and press a corresponding “white key G1-E” in the metronomic selection area to select the metronomic type. There are six types.
Hold down the “EFFECT” button and press a corresponding “white key G-A” in the speed regulation area to adjust the metronome speed.
TOUCH ADJUSTMENT
Hold down the “EFFECT” button and press a corresponding “white key c1-e1” in the strength selection area to adjust the keyboard response time.
There are three levels of regulation, the strongest in “c1” and the weakest in “e1”.
CHORUS SOUND EFFECT
Hold down the “EFFECT” button and press a corresponding “white key e3-b3” in the chorus effect area to produce the chorus sound effect. There are five effects to choose from.
Hold down the “EFFECT” button and press the “white key c4” to turn off the chorus sound effect.
REVERBERATION EFFECT
Hold down the “EFFECT” button and press a corresponding “white key e4-a4” in the reverberation effect area to produce reverberation effect. There are four kinds of effects to choose from.
Hold down the “EFFECT” button and press the “white key c5” to turn off the reverberation effect.
RECORDING
Track 1 Recording and Playing:
Hold down the “EFFECT” button, and press the “white key A2” in track 1 area to start track 1 recording.
When you play the keys or step on the pedals, you begin to record notes.
Hold down the “EFFECT” button again and press the “white key A2” in track 1 area to stop track 1 recording.
Hold down the “EFFECT” button and press the “white key B2” in track 1 area to start playing the notes recorded in track 1.
Track 2 Recording and Playing:
Hold down the “EFFECT” button, and press the “white key C1” in track 2 area to start track 2 recording.
When you play the keys or step on the pedals, you begin to record notes.
Hold down the “EFFECT” button again and press the “white key C1” in track 2 area to stop track 2 recording.
Hold down the “EFFECT” button and press the “white key D1” in track 2 area to start playing the notes recorded in track 2.
Track 1/2 joint broadcasting:
Hold down the “EFFECT” button and press the “white key E1” to play the notes recorded by track 1 and track 2 at the same time. Operate the metronome before recording with the metronome. The metronome will be recorded. The type of metronome can not be changed while recording, and the speed of metronome can not be changed when recording.
TRANSPOSE
The transfer function can change the pitch of the keyboard without changing the keyboard finger movement.
Hold down the “MIDI/TRANSPOSE” button and press the “white key F2 and f3” to select the transpose function.
Hold down the “MIDI/TRANSPOSE” button and press the “white key f3” to close the transpose function.
MP3 PLAY
Insert the flash disk with MP3 songs into “USB socket” and play MP3 songs automatically in about 3 seconds.
By pressing the “PLAY/PAUSE” key, MP3 songs can be paused or replayed.
Press the “MP3 SELECT” control button in a short time to select the front/back MP3 songs.
Pressing the control button of “MP3 VOLUME” for a long time can adjust the volume of songs. Maximum peak sound requires volume runner control.
Note! Only MP3 format songs can be played!
POWER SUPPLY
This product can be powered by standard indoor wall sockets. Please only use the power cord specified in this product. When not in use, please turn off the power supply. When not in use for a long time, pull out the power cord and keep it properly.