Fame ARU-03 Wireless System For Guitar User Manual

Fame ARU-03 Wireless System For Guitar

Safety Instructions

RISK OF ELECTRIC SHOCK. DO NOT OPEN!

WARNING: To prevent the risk of electrocution, do not open the device.
Please leave all maintenance and repairs to a qualified service workshop or contact your distributor.

• The lightning flash symbol warns the user about non-insulated current and the risk of electrocution.
• The exclamation mark symbol warns the user about important maintenance and operating instructions in the manual.
• Intended for indoor use only.
• Read the manual.
• Please recycle the packaging correctly to protect the environment.
• Occasionally a new product may cause undesirable odours or even emit smoke for a short period of time. This reaction is normal and will disappear after a few minutes.
• To prevent condensation from forming in the device, please allow the device to adapt to the surrounding temperature before operating.
• Please position the device in a well-ventilated area, beyond the reach of flammable materials or liquids.
• Do not block any ventilation openings, as it may cause overheating.
• Please remove the power cable if the device is not operated for extended periods of time or maintenance is to be conducted.
• This device is designed to operate in environments with a maximum temperature of 40° Celsius.
• In case of a damaged power cable, it must be replaced by an original replacement part from the manufacturer.
• Ensure that the supply voltage does not exceed the voltage capacity indicated on the housing of the device.
• In case of failure of the device, please contact the distributor and stop all operations of the device immediately.

WARNING: Do not look directly into the light source! Do not operate this device in the presence of persons suffering from epilepsy!

OVERHEAD INSTALLATION
The installation must be performed exclusively by qualified personnel. Incorrect installation can cause serious injuries or da-mage. Note the load limits of the selected installation position. Ensure that during installation or dismantling/ maintenan-ce there are no unauthorized persons below the device.
Manufacturer: MUSIC STORE professional GmbH, Istanbulstraße 22-26, 51103 Köln, Germany

Congratulations on your new Fame ARU-03!!
Thank you for choosing a Fame product. Thanks to efficient development and economical production, Fame makes high-quality products at a best price possible. Please read these operating instructions carefully to be informed about all functions of this product and keep them for future reference

Have fun with your new product!
Your Fame Team

Guarantee:
The current general terms and conditions and guarantee conditions of Music Store professional GmbH apply.
Can be viewed under: www.musicstore.de
If you have any questions or suggestions, please contact us:
Music Store Professional GmbH
Istanbulstr. 22-26
51103 Köln
Managing Director: Michael Sauer
WEEE-Reg.-Nr. DE 41617453

Intended use:
The product Fame ARU-03 has been designed for the wireless transmission of musical instruments with electromagnetic pickups to a suitable amplifier. The device may only be used for this purpose and in accordance with the operating instructions. Other purposes as well as operation under other operating conditions are expressly not intended and can lead to damage to property or personal injury! No liability is assumed for damage resulting from improper use. It must be ensured that the device is operated exclusively by trained and competent users who are in full possession of their mental, physical and sensory abilities. The use of other persons is expressly only permitted at the request of a person responsible for their safety, who instructs or supervises the use.

Scope of delivery

Safety Instructions

• DANGER! (For babies and children)
  Packaging, plastic film and other packaging materials must be properly stored or disposed of. It must be kept out of the reach of babies and children due to the danger of suffocation. Ensure that children never use the appliance unattended! In addition, make sure that children do not remove any (small) parts from the appliance, as they could suffocate by swallowing them!

• Note! (Fire hazard)
  Ensure that the unit is not exposed to a direct source of heat and that it is used away from an open fire. Never cover or tape ventilation slits or the device itself.

• Note! (Operating Conditions)
  Due to its structural characteristics, the device is designed for indoor use. Never ex-pose the device to rain, moisture or liquids, as this can lead to damage. Vibrations, dirt or solar radiation can also lead to damage, avoid them!

• Note! (Power supply)
  It is essential that you check that the device voltage matches your local mains voltage. It is highly recommended that you fuse your main socket with a residual current circuit breaker (FI). If you do not use your device for a longer period of time, disconnect the device from the mains. to minimize dangers. The same applies to storm conditions such as thunderstorms or floods, etc.

Installation

Be sure to inspect the product for damage before using it. Optimally, use the original packaging or suitable transport or storage packaging to protect the product from dust, moisture, etc. when not in use.

Putting into operation:

ARU-03 Transmitter (black)

1| 6.35 mm audio jack plug, for connection with instrument
2| press and hold POWER button for 2 seconds to turn on/off the unit. Press to change channel
3| 3-colour LED, 1 colour per channel
4| Aerial
5| Micro USB socket
ARU-03 Transmitter (white)

1| 6.35 mm audio jack plug, for connection to amplifier or other suitable products
Other functions identical to ARU-03 Sender

Operating instructions:

1. Press the POWER button (2) press and hold the POWER button (2) on the transmitter and receiver for 2 seconds each to turn on the unit. The LED will light up. The LEDs of the transmitter and receiver must have the same colour.
   If the colors of the LEDs differ, press the POWER button on either ARU-03 until both LEDs light up in the same color. Both devices are now connected to each other on the same channel. The transmitter LED will stop flashing and light up continuously.

2. Insert the transmitter into the instrument and the receiver into an amplifier or other suitable device. nt stecken und den Empfänger in einen Verstärker oder ein anderes geeignetes Gerät.

LED Anzeige

Akku Ladezu- stand| ARU-03 Trans- mitter| ARU-03 Receiver
Connection successful| Connection failed
Power An / Ladung > 30%| LED lights up in color of the selected channel The current channel indicator color flashes| The current channel indicator color flashes
Ladung < 30%| LED flashes slowly in the colour of selected channel
Ladung < 10%| LED flashes quickly in the colour of the selected channel
Ladung < 5%| LED flashes quickly and device switches off automatically
Während Auf-ladung| LED flashes slowly green
Aufladung abge-schlossen| LED lights green throughout
LED colours and frequency

LED colours| red| green| blue
Frequency| 863.7 MHz| 864.3 MHz| 864.7 MHz

Note

1. The transmitter and receiver may become warm after prolonged use, this is perfectly normal.
2. Do not use the transmitter or receiver during charging.
3. The receiver automatically turns off after 30 minutes of no signal received from transmitter.

Components and functions

Connector and terminal assignment
Configuration 6.3 mm mono jack plug:

1. Signal
2. Mass

ARU- 03

 | ARU-03 Transmitter| ARU-03 Reciever
Power supply| Rechargable 3.7V 380MAH Lithium Ion Battery
Audio connection| 6,35 mm Mono jack plug
Channel| 5 UHF Channels
Frequency| 863.7/864.3/864.7 MHz
Transmission power| > 10dBm
Signal-to-noise ratio| < -85dB
Frequency range| 40Hz~18KHz+-3dB
Delay| <1ms
Distortion| <0.5%
Max. range| >20m (without obstacles)
Max. service life| 4.5 hours.
Ladezeit| < 2.5 hours
ARU-03

 | Transmitter| Reciever
Weight| 50 g| 48,5 g
Dimensions| 120 x 22x 24 mm| 120 x 22 x 24 mm

Troubleshooting

The following overview serves as an aid for quick troubleshooting. If you are unsure, contact the manufacturer, the dealer or the appropriate specialist personnel. Never open the device yourself!

same channel.

Cleaning

Regular cleaning of the device from impurities and dust increases the shelf life of the product. Always disconnect the device from the power supply while cleaning it Optical lenses showuld be cleaned with a dry microfiber cloth. This will also optimize the light output. Never clean the device wet! Ventilation grilles and openings should always be cleaned of dust and dirt. Compressed air sprays are ideal for this application.

Environmental Safety:
Music Store professional GmbH always endeavors to reduce the burden of packaging to a minimum. The use of environmentally friendly and recyclable materials is always of fundamental importance. Please recycle the packaging after use.

• Disposal of packaging:
  Ensure that paper packaging, plastic material, etc. are recycled separately. Observe the labels and the corresponding regulations.

• Disposal of batteries:
  Batteries should not be thrown away! Please dispose of batteries in accordance with official regulations.

• Disposal of your old device:
  This device is subject to the WEEE directive (Waste Electrical and Electronic Equipment) in its currently valid form. The device must not be disposed of with normal household waste. The device is disposed of via an approved disposal company or your local waste disposal centre. The regulations valid in your country must be observed!

References

• Music Store Online-Shop für Musikinstrumente | MUSIC STORE professional

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>