MiBOXER WL5 5 Inch 1 LED Strip Controller User Manual
- June 13, 2024
- MiBOXER
Table of Contents
Mi- Light
Subordinate New Brand
WiFi 5 in 1 LED Strip Controller
Model No.: WL5
Please read the instructions carefully before using the controller.
Features
The controller is adopted by the most advanced PWM control technology, and has memory function(The light status will keep same as the status before you turn off the light); Wireless and 4G controlled by MiBoxer APP.
| Support amazon alexa and google assistant control
---|---
| Smartphone APP control
| RGB colors to choose
| Color temperature 2700~6500K
| Group control randomly by APP
| WiFi Wireless Control
| Compatible with 2.4GHz RF Remote Controller
| Dimmable Saturation control
| Timing ON/OFF the lights
| 16 Color Changing modes
Parameters
Model No.: WL5
Input Voltage: DC12V~24V ( 5.5*2.1mm)
Output: 6A/Channel ( Total Output Max.15A )
Working Temperature: -20~60℃
Communication Mode: WiFi-IEEE 802.11b/g/n 2.4GHz
RF: 2.4GHz Weight: 65g
SET Button: Long press “SET”
for 3 seconds; When red indicating light blink quickly, device reset and go
into Smart Link mode.
Switching Output Mode: Short press “SET” button to switch the output mode; The
indicating lamp flickering means switching successfully; Different colors
flickering correspond to different output mode; Details see below sheet.
White Light
Flickering| Yellow Light
Flickering| Red Light
Flickering| Green Light
Flickering| Blue Light
Flickering
---|---|---|---|---
Single Color
Mode| Dual White
Mode| RGB
Mode| RGBW
Mode| RGB+CCT
Mode
Indicating light instruction:
| Red light | Red light | Green light | Green light | Yellow light |
|---|---|---|---|---|
| always-on | blinking | always-on | blinking | blinking |
| Disconnected | Smart Link | Networking | Received | Device |
| from network | mode | successfully | signal | malfunction |
Auto-synchronization function
Different controllers can work synchronously when they are started at
different times, controlled by the same remote, under same dynamic mode and
with same speed.
Remark:
- Indicating Auto-transmitting.
- Controller will be auto-synchronizing in the same dynamic modes and within 30m controlling distance.
Auto-transmitting Diagram
One strip controller can transmit the signals from the remote control to
another controller within 30m, as long as there is a strip controller within
30m, the remote control distance can be limitless.
Connect to LED strip diagram
Controller input voltage must be in accordance with the required voltage of
LED Strips.
Remote Controller
Compatible with these remote controls (Purchased separately).
For more details, pls read the remote instruction.
Attention
- Please check whether the input voltage of the constant voltage power supply is in accordance with the controller, and please check the connection of both the cathode and anode.
- The working Voltage is DC12~24V, the controller will be broken if the voltage is higher than 24V.
- Non-professional user cannot dismantle the controller directly, otherwise, it may cause fire and electric shock.
- The working temperature is -20~60℃; Do not use the device to direct sunlight, moist and other high temperature area.
- Please do not use controller around the mental area and high magnetic field, otherwise, it will badly affect the control distance.
MiBoxer APP User Instruction
-
APP Downloading
For IOS System: Pls search “MiBoxer” on APP store. (Above IOS9.0)
For Android System: search “MiBoxer” on Google Play (Above Android 5.0) or Scan below QR-code to download APP.https://www.futlight.com/app/1.html -
Register MiBoxer Account
Open APP and click Register button;Complete the register and log in. -
Add Device
1. Click the right top “+” on the device list.
2. Please select the device type you will add, then complete the adding according to the hint of APP.
3. Back to device list after adding successfully, then pull down refresh in list to get the device status. -
Modify device name or delete device
Slide device list to left, click ” Edit ” to modify device name; click ” Delete ” to delete device.
Note: If the device was shared to others, then the device will also be deleted on your friends’ device list. -
Group Control
1. Click to switch to Group list, then click the right top icon on the Group list to create groups.
2. Slide the Group list to left to Edit / Delete groups.
Note: The group just work on APP Controlling, cannot work on Voice control. Please open third party APP for Group Voice control. -
APP Control
Click the device or group that you want to dim on device list and group list into Dimming Interface.
Click speed+ under dynamic mode.
Click speed- under dynamic mode.
Sunset mode: Gradually OFF within 10 minutes.
Good night mode: Gradually OFF within 1 minute. -
Third Party Voice Control instructions
Search “Mi-Light Smart” on third-party platform APP and set up.
Click left top “ ” icon on the home page;
Then click “ ” to check detailed instructions. -
Sharing Device
Share the device to friends, Let your friends can control this device.
1. Click the left top “ ” icon on the home page.
2. Click “ ” to My sharing, then click”Add sharing”
(Note: the receiving sharing device cannot be shared again).
3. Click “ ” to edit sharing, slide to left to delete sharing.
jack@milight.com
https://miboxer.com/light/video/wifi.html
Scan QR code to watch online video for
WiFi pairing Controller not suitable for use under moisture
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>