ZEBRONICS ZEB-LP3500- LED Home Theater Projectors User Manual

ZEB-LP3500- LED Home Theater Projectors
User Manual

ZEB-LP3500- LED Home Theater Projectors

Dear Customer,
Thank you for purchasing ZEB-LP3S00 LEO Projector. Please read the user manual carefully before usage & save it for future reference.

Precautions:

1. Kindly use the cable provided along with the product to provide a stable power supply from AC 100-240V, 50/60Hz power source.
2. Avoid self-disassembly of the product to avoid failure of warranty.
3. Avoid looking directly at the projector lens while it is active,
4. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
5. The apparatus shall not be exposed to dripping or splashing of water or liquids.
6. The device must be kept in a well-insulated surrounding for proper functioning.
7. Open flame sources, such as candles, should not be placed on top of the device.
8. It is recommended to power of the projector after continuous usage of 6 Hours.
9. CAUTION: to avoid accidents, this appliance must be fixed properly on the floor or on the wall according to instructions for installation.
10. CAUTION: Danger of explosion if batteries are incorrectly replaced or not replaced by the same type or equivalent.
11. In case of inquiry regarding the projector, email us at [email protected] or contact us at 044 4000 0004.

Features:

• Home Theatre Projectors for Movies, TV & Gaming etc.
• The projector comes with AV IN, AUX OUT, USBx2, HDMIx2
• Built-in Speaker
• Wide Compatibility
• Ceiling Mountable
• Remote Control
• Matt Finish

Specification:

H.264
Input Voltage| : AC 100-240V, 50/60Hz
Product Dimension (Wx Dx H)| :260 x 210 x 100 mm
NET Weight| : 1.87 kg

Package contents:

Projector:…………….1 U
Remote Control:………………………. 1 U
Power Cord:…………………. 1 U
AV cable:…………………………… 1 U
HDMI Cable………………: 1 U
Support Base. ……………………..1 U
QR Code Guide:…………………………… 1 U
Micro fabric lens cleaner:…………………1 U

PROJECTOR CONTROL AND BUTTONS

Right Side
Back Panel

1. AV Input
2. AUX Port
3. HOMI Input 1
4. HDMI Input 2
5. USB Input x 2
6. IR Receiver
7. Ventilation Inlet
8. Speaker
9. Ventilation Outlet

TOP PANEL CONTROL AND BUTTONS

Control Panel

Bottom View

Note: The adjustable support base con assures the mox projection angle by 15°, The best display effect will be obtained by projection angle ranges of 0° – 8°.
Front View
Left Side
Remote Control

Note: if the remote is not used for a long time, kindly make sure to remove the batteries to avoid leakage of the battery.

Setting up the projector

1. Connect the power cord to the projector and turn it ON, You’ll be indicated with the white color LED near the power button.
2. Before turning ON, make sure to place it in a flat surface for a proper projection then Press the power button / turn it on by using the remote.
3. Align the projector as shown in the image below to ensure proper projection.
   

Keystone and Focus

If the projected image is in a trapezoidal shape, it can be resolved by Keystone Adjustment. (Do Manual Keystone Adjustment).

Note: lime neuron correction Jan to resolve image snape, please reduce the vertical height of the projector in relation to the center of the screen.

Interface

• USB Connection: Insert the USB device into the USB port and choose USB1 or USB2 from the source input menu. Press the Play button to play or pause the selected file.
• HDMI Connection: Use an HDMI cable to connect the HDMI output of the source device to the projector and choose the required signal source “HDMI1” or “HDMI2” from the source input menu.
• AV Connection: Use the AV cable to connect the AV output of the source device to the projector and choose the “AV” source input from the source input menu.
• Audio Out Connection: Use an AUX 3.5mm cable to connect speakers or other audio output devices with the projector.

ISO 9001:2015 Certified Company
www.zebronics.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>