RUGGED RIDGE 11549.07 Stamped Steel Overrider for Arcus Front Bumper Installation Guide
- June 13, 2024
- RUGGED RIDGE
Table of Contents
RUGGED RIDGE 11549.07 Stamped Steel Overrider for Arcus Front Bumper
Components
- Right Overrider Mounting Bracket (1)
- Left Overrider Mounting Bracket (1)
- Stamped Overrider (1)
- M10 Bolt (2)
- M10 Washer (4)
- M10 Nut (2)
ATTN: STATE OF CALIFORNIA CONSUMERS
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov
Perform steps 1-5 on the Front Bumper’s Instruction Sheet.
Assembly and Installation Instructions
-
Reusing OE bolts, loosely attach overrider mounting brackets to frame.
Complete steps 7-8 on the Front Bumper Instruction Sheet. -
Align stamped overrider to overrider mounting brackets and bumper shell. Using supplied M10 bolt, nut, and washer, loosely attach stamped overrider.
Customer Support
OMIX-ADA® TECHNICAL SUPPORT
PHONE: M-F 8am – 5pm EST
1-800-449-6649
FOR WARRANTY OR TECH CONCERNS EMAIL:
webmaster@omixsupport.com
460 HORIZON DR. | SUWANEE, GA 30024 | PHONE:
770-614-6101 | FAX:
844-270-0593 | www.Omix-ADA.com
Copyright © 2020 Omix-Ada®, Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>