RUGGED RIDGE 11142.02 Euro Side Marker and Turn Signal Guard Kit Installation Guide
- June 13, 2024
- RUGGED RIDGE
Table of Contents
RUGGED RIDGE 11142.02 Euro Side Marker and Turn Signal Guard Kit
Installation Guide
Instruction
Step (1 ) Remove the front turn signal mounting screws. Place front guard over lamp and attach with longer supplied screws. Repeat for other side.
Step (2 ) To mount the side marker lamps place one guard over the lamp and mark the mounting hole location with a scribe or pen. Use a 3/16” drill bit and drill drill holes in the flare at the scribed spots. Use the supplied allen head bolts and nuts to secure the guard to the flare.
Note: Some Jeep models will require the use of the black spacers to clear
bulges in the flare in relation to the side marker lamps. Not all of the
spacers may be needed
460 HORIZON DR. SUITE 400
SUWANEE, GA 30024
PHONE: 770-614-6101
FAX: 770-614-6069
info@omix-ada.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>