RUGGED RIDGE 13552.50 Windbreaker 07 18 Jeep Wrangler JK 2 Door Installation Guide

June 13, 2024
RUGGED RIDGE

RUGGED RIDGE 13552.50 Windbreaker 07 18 Jeep Wrangler JK 2 Door Installation Guide
RUGGED RIDGE 13552.50 Windbreaker 07 18 Jeep Wrangler JK 2
Door

Instructions

  1. SOFT TOP VEHICLE: Refer to owner’s manual for instructions on lowering factory top. Once open, unscrew shoulder bolts fastening top to sport bar and remove soft top.
    HARD TOP VEHICLE: Refer to owner’s manual for instruction on removing factory hard top
    Instructions

  2. Orient windbreaker with window on top and vinyl side facing rear of vehicle. Start with top straps and thread end of each strap around sport bar and through each buckle as shown. Loosley tighten each strap to hold windbreaker in place.
    Instructions

  3. Thread side straps loosely around side sport bars as shown.
    Instructions

  4. Secure windbreaker to seat brackets. Pull down gently on the fabric and thread straps through back of seat brackets. Buckle straps and tighten all straps.
    Instructions
    Note: If installing with optional tonneau cover proceed to Step 5. Otherwise, installation is complete

  5. Zip windbreaker to tonneau cover using zipper under flap of windbreaker.
    Instructions

460 HORIZON DR. SUITE 400
SUWANEE, GA 30024
PHONE: 770-614-6101
FAX: 770-614-6069
info@omix-ada.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

RUGGED RIDGE User Manuals

Related Manuals