Tribit BTS10 Storm Box Micro User Manual

Tribit BTS10 Storm Box Micro

Packing List

Product Illustration

Charging

Connect this speaker to a SV power outlet via the providing USB-C charging cable.

Battery Indicator

Indicator Instruction

Button

Power on/off

Bluetooth Connection

• The Stormbox Micro Speaker will automatically connect to the last paired device again if available. If it fails, the speaker will enter to pairing mode.
• The speaker can remember up to 8 paired Bluetooth devices.
• Better still, it can connect to 2 devices simultaneously at a time.

Conversion between 2 Connected Devices

1. Pause the playback of the current device
2. Play the audio file of the other device

Volume Adjustment

Multifunctional Button

(MFB)

PartyMode

1. Make sure both two speakers are turned on.
2. Press on one of the speakers for 2S to enter the pairing state.
3. Press on the other speaker for Ss, then release the button to enter Stereo pairing when you hear the “Party mode”, the “Party mode”is on.

Note : The function of party mode can be realized only when you have 2 Tri bit Storm box Micro speakers.

Stereo Mode

1. Make sure both two speakers have entered party mode.
2. Short press the Bluetooth button on any of the two speakers.
3. Release the buttons when you hear the voice of Stereo Mode. One speaker will sound “Left” and the other will sound “Right”. and then the stereo mode is activated.

Note : The function of stereo mode can be realized only when you have 2 Tri bit Storm box Micro speakers.

Conversion between Party Mode and Stereo Mode

• Short press the Bluetooth button on any of the two speakers.

Disable the Party Mode or Stereo Mode

• Press and hold the Bluetooth button for Ss on any of the two speakers, then both will re-enter Bluetooth pairing mode.

Specifications

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1 )this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IC Caution
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:

• (1) This device may not cause interference, and
• (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Hereby, Thousandshores Deutsch land GmbH declares that the radio equipment type Portable Wireless Speaker BTSl O is in compliance with Directive 2014/53/EU.
The full text of the EU declaration conformity is available at the following internet address: http://files.tribit.com/e02-1935n-01-de-doc.pdf

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>