RUGGED RIDGE 11231.26 Elite Turn Signal Guard Instruction Manual
- June 13, 2024
- RUGGED RIDGE
Table of Contents
RUGGED RIDGE 11231.26 Elite Turn Signal Guard
Product Information
- Product Name : Elite Turn Signal Guard
- Part Number: 11231.26
- Manufacturer: Omix-Ada
- Address: 460 Horizon Dr. Suite 100, Suwanee, GA 30024
- Contact Information:
- Phone – 770-614-6101, Fax – 770-614-6069,
- Email – info@omix-ada.com
- Website: www.Omix-Ada.com
Product Usage Instructions
- Remove the grille from the vehicle and disconnect and remove the turn signal lights.
- Remove the tape backing from the underside of the Turn Signal Guard.
- Clean the lens of the turn signal and allow it to dry completely.
- Attach the Turn Signal Guard to the turn signal using the clip on the bottom of the outer ring. Hook the bottom clip first and then press the bottom surface of the light guard into place.
- Replace the grille on the vehicle and reconnect the turn signal lights.
Elite Turn Signal Guard
- Remove grille from vehicle; disconnect and remove turn signal lights.
- Remove tape backing from underside of Turn Signal Guard.
- Clean lens and allow to dry completely.
- Attach Turn Signal Guard to turn signal using clip on bottom of outer ring. Hook bottom clip first then press bottom surface of light guard into place.
- Replace grille on vehicle; replace and reconnect turn signal lights.
OMIX-ADA® TECHNICAL SUPPORT
PHONE: M-F 8am – 5pm EST
1-800-449-6649 | EMAIL:
techsupport@omix-ada.com
FOR WARRANTY INFORMATION VISIT : www.Omix-Ada.com
Copyright © 2016 Omix-Ada®, Inc.
Documents / Resources
|
RUGGED RIDGE 11231.26 Elite Turn Signal
Guard
[pdf] Instruction Manual
11231.26 Elite Turn Signal Guard, 11231.26, Elite Turn Signal Guard, Turn
Signal Guard, Signal Guard, Guard
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>