RUGGED RIDGE 11231.28 Elite Fog Light Guard Instruction Manual
- June 13, 2024
- RUGGED RIDGE
Table of Contents
RUGGED RIDGE 11231.28 Elite Fog Light Guard
Product Information
- Product Name : Elite Fog Light Guard
- Part Number : 11231.28
Product Usage Instructions
- From underneath the vehicle, locate the 4 Phillips Head Screws connecting the fog lights to the bumper.
- Remove the screws and lights, and set them aside for later use. Removing the plastic air dam may provide easier access.
- If using the O-Ring, place it around the outside of the Guard.
- Insert the Fog Light Guard into the fog light opening. If applicable, make sure the O-Rings contact the bumper.
- Reinstall the fog light guards and tighten the screws.
For warranty information, please visit www.Omix-Ada.com.
Contact Information
- Address : 460 HORIZON DR. SUITE 100, SUWANEE, GA 30024
- Phone : 770-614-6101
- Fax : 770-614-6069
- Email : info@omix-ada.com
OMIX-ADA® TECHNICAL SUPPORT
PHONE: M-F 8am – 5pm EST
1-800-449-6649
EMAIL: techsupport@omix-ada.com
FOR WARRANTY INFORMATION VISIT: www.Omix-Ada.com
460 HORIZON DR. SUITE 100
- SUWANEE, GA 30024
- PHONE : 770-614-6101
- FAX : 770-614-6069
- info@omix-ada.com
Elite Fog Light Guard
-
From underneath vehicle, locate 4 Phillips Head Screws connecting fog lights to bumper. Remove screws and lights and set aside for later use. Notice
Removing plastic air dam may provide easier access. -
If using O-Ring, place around outside of Guard.
-
Insert Fog Light Guard into fog light opening. If applicable, O-Rings should contact bumper.
-
Reinstall fog light guards and tighten screws.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>