RUGGED RIDGE 13552.51 JK 4 Door Windbreaker Installation Guide

June 13, 2024
RUGGED RIDGE

**RUGGED RIDGE 13552.51 JK 4 Door Windbreaker Installation Guide


**

Installation

  1. SOFT TOP VEHICLE: Refer to owner’s manual for instructions on lowering factory top. Once open, unscrew shoulder bolts fastening top to sport bar and remove soft top.
    HARD TOP VEHICLE: Refer to owner’s manual for instruction on removing factory hard top.

  2. Orient windbreaker with window on top and vinyl side facing rear of vehicle. Start with top straps and thread end of each strap around sport bar and through each buckle as shown. Loosely tighten each strap to hold windbreaker in place.

  3. Secure windbreaker to seat brackets. Pull down gently on the fabric and thread straps through back of seat brackets. Buckle straps and tighten all straps.

NOTICE
If installing with optional to nneau cover extension proceed to
Step 4. Otherwise, installation is complete.

  1. Zip windbreaker to tonneau cover extension using zipper under flap of windbreaker.

460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024
PHONE: 770-614-6101
FAX: 770-614-6069 | info@omix- ada.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

RUGGED RIDGE User Manuals

Related Manuals