RUGGED RIDGE 13594.36 Savannah Brief Top Installation Guide
- June 13, 2024
- RUGGED RIDGE
Table of Contents
RUGGED RIDGE 13594.36 Savannah Brief Top
Product Information
- Product Name: Savannah Brief Top, JT
- Part Number: 13594.36
- Manufacturer: Omix-ADA
- Address: 460 Horizon Dr. Suite 400, Suwanee, GA 30024
- Contact: Phone – 770-614-6101, Fax – 770-614-6069, Email –
info@omix-ada.com
INSTALLATION INSTRUCTION
-
Pre-Installation Requirements
For correct installation, the mounting surface of the part should be between 70-95° F (21-35° C) prior to installation. Remove existing hard or soft top. For OEM (original/factory) soft tops, also remove the windshield header channel, Tube hardware, and side door surrounds can be used if wanted. Brief Top works with or without door surrounds.
Unfold your new Savannah Brief Top and lay it on a flat surface. -
Lay the header channel on top of the fabric tucking inside and secure it with snaps as shown.
-
Secure with snaps as shown.
-
Place the top onto the vehicle. Placing header channel onto windshield front. Unfold the cover fabric then pull over the sound bar and roll the cage, working toward the rear of the vehicle.
-
Attach the windshield header to the windshield using the bolt and curved washer provided.
-
Pull the top all the way back and attach the rear strap to the hole in the back of the roll bar. Tighten the strap until snug.
-
Open all doors. Attach the hook and loop straps around the roll bar to secure the brief to the vehicle. Attach the two middle straps together behind the window pillar as shown in the picture.
Care and Cleaning
Wash the product only with mild soap and dry with a clean cloth. Do not use any cleaning solvents.
CONTACT
- ADDRESS: 460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 |
- PHONE: 770-614-6101
- FAX: 770-614-6069
- info@omix-ada.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>