RUGGED RIDGE JL-JLU Spartan Front Bumper Standard Ends Overrider User Guide
- June 13, 2024
- RUGGED RIDGE
Table of Contents
RUGGED RIDGE JL-JLU Spartan Front Bumper Standard Ends Overrider
Product Information
Product Name| Spartan Front Bumper – Standard Ends + Overrider, JL/JLU &
Gladiator
---|---
Part Number| 11548.42
Manufacturer| Omix-ADA
Components|
- Spartan Overrider (1)
- Winch Plate (1)
- Spartan Front Bumper (1)
- D-Shackle Tab (2)
- M12 Bolt (8)
- M12 Washer (8)
- M12 Lock Nut (8)
- M12 Nut Plate (2)
- M10 Bolt (12)
- M10 Washer (4)
- M8 Bolt (11)
- M8 Washer (16)
- M8 Nut Plate (2)
- M4 Bolt (8)
- M4 Washer (16)
- M4 Nut (8)
- Fog Light Adapter – Left (2)
- Fog Light Adapter – Right (2)
- Fog Light Adapter – Washer (10)
- Badge Logo (1)
Product Usage Instructions
- Remove the original equipment (OE) front bumper and inner frame horn support brackets.
- Loosely install the Winch Plate to the inside of the frame using the supplied M10 hardware.
- If installing Sport model fog lights, remove the black plastic mounting bracket from the light by depressing the tabs on the light housing. Replace the mounting bracket with the supplied Fog Light Adapter components as shown.
- Install the fog lights using the supplied M4 hardware.
- Loosely install the Spartan Front Bumper and D-Shackle Tabs using the supplied M12 hardware. The M12 Nut Plates are designed to be mounted behind the Winch Plate.
- Fasten the Spartan Front Bumper to the Winch Plate using the supplied M8 hardware. Tighten all fasteners and reconnect fog lights.
- Install the Spartan Overrider using the supplied M8 hardware and nut plates.
- If desired, apply the Badge Logo above the passenger side D-Shackle Tab.
Components
- Spartan Overrider (1)
- Winch Plate (1)
- Spartan Front Bumper (1)
- D-Shackle Tab (2)
Hardware Components
- M12 Bolt (8)
- M12 Washer (12)
- M12 Lock Nut (4)
- M12 Nut Plate (2)
- M10 Bolt (2)
- M10 Washer (2)
- M8 Bolt (10)
- M8 Washer (10)
- M8 Nut Plate (2)
- M4 Bolt (8)
- M4 Washer (16)
- M4 Nut (8)
- Fog Light Adapter – Left (2)
- Fog Light Adapter – Right (2)
- Fog Light Adapter – Washer (6)
- Badge Logo (1)
Installation Instruction
- Remove OE front bumper and inner frame horn support brackets.
- Loosely install Winch Plate to the inside of the frame using supplied M10 hardware.
- If installing Sport model fog lights, remove the black plastic mounting bracket from the light by depressing tabs on the light housing. Replace the mounting bracket with the supplied Fog Light Adapter components as shown.
- Install fog lights using supplied M4 hardware.
- Loosely install Spartan Front Bumper and D-Shackle Tabs using supplied M12 hardware. M12 Nut Plates are designed to mount behind Winch Plate.
- Fasten Spartan Front Bumper to Winch Plate using supplied M8 hardware. Tighten all fasteners and reconnect fog lights.
- Install Spartan Overrider using supplied M8 hardware and nut plates.
- If desired, apply the Badge Logo above the passenger side D-Shackle Tab.
Warranty
FOR WARRANTY OR TECH CONCERNS EMAIL: webmaster@omixsupport.com.
Contact Information
- ADDRESS: 460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024
- PHONE: 770-614-6101
- FAX: 844-270-0593
- WEBSITE: www.Omix-ADA.com.
- E-MAIL: webmaster@omixsupport.com.
Copyright © 2018 Omix-Ada®, Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>