RUGGED RIDGE TJ Body Armor Rear Tailgate Sill Cover User Guide
- June 13, 2024
- RUGGED RIDGE
Table of Contents
RUGGED RIDGE TJ Body Armor Rear Tailgate Sill Cover
Product Information
- Part Number: 11650.15
- Manufacturer: Omix-ADA
- Address: 460 Horizon Dr. Suite 100, Suwanee, GA 30024
- Phone: 770-614-6101
- Fax: 770-614-6069
- Email: info@omix-ada.com
Description:
The Body Armor Rear Tailgate Sill Cover is designed for use with TJ & LJ
models. It is a high-quality product manufactured by Omix-ADA, a reputable
brand known for producing reliable automotive accessories.
Product Usage Instructions
- Clean the tailgate surface thoroughly to ensure proper adhesion of the sill cover.
- Peel off the backing from the adhesive side of the sill cover.
- Align the sill cover with the tailgate and press firmly to adhere it in place.
- Smooth out any air bubbles or wrinkles using a squeegee or your hands.
- Allow the adhesive to fully bond with the surface before exposing it to water or extreme temperatures.
- Maintain the sill cover by cleaning it regularly with mild soap and water. Avoid using abrasive cleaners or tools that may damage the surface.
For any further assistance or product-related inquiries, please contact Omix- ADA using the provided contact information.
Body Armor, Rear Tailgate Sill Cover; TJ & LJ
-
Step 1: Remove lower tire bump stop if so equipped.
-
Step 2: Clean mounting surface with a strong cleaner or rubbing alcohol. Avoid areas that the product will not be adhered to.
THIS MUST BE DONE FOR ADHESIVE TAPE TO PROPERLY STICK. FAILURE TO CLEAN COULD RESULT IN POOR ATTACHMENT AND FAILURE OF PRODUCT TO STAY ATTACHED.
Allow area to dry completely before attaching body armor. -
Step 3: Test fit the Rear Seal Armor to the vehicle before removing the plastic backing film. This will aid in aligning the piece properly before securing with the two-sided 3M tape.
-
Step 4: Position armor onto lower body seal. Make sure that it is evenly spaced before applying any pressure to armor. When satisfied with placement apply pressure to all areas to properly secure armor to vehicle. Reinstall lower rubber tire stopper.