RUGGED RIDGE 11651.07 Body Armor Rear Corner Guards Installation Guide
- June 13, 2024
- RUGGED RIDGE
Table of Contents
**RUGGED RIDGE 11651.07 Body Armor Rear Corner Guards Installation Guide
**
Contents:
-
(1) Left Rear Body Armor
-
(1) Right Rear Body Armor
Required Tools:
- Phillips screwdriver
- Socket Driver
- 7 mm. Socket
- Flathead screwdriver (Only for 2 Door)
-
Remove the license plate using Philips screwdriver.
(For 2 Door using a Flathead screwdriver) -
Remove the license plate holder using a socket driver and 7 mm. socket.
-
Remove the driver side and passenger side tail light using a Philips screwdriver.
-
Clean surface with isopropyl alcohol (rubbing alcohol).
-
Apply 3M© Adhesive Promoter 06396 to mounting surface. Avoid areas that tape will not contact. Allow 90 seconds for Adhesive Promoter to dry before proceeding.
Note: For best results, install within 10 minutes of installing Adhesive Promoter. -
Test fit Body Armor to the vehicle before removing plastic liner from mounting tape. This will aid in aligning the item before adhesion.
-
Remove only enough plastic liner to be easily gripped when item is installed.
Note: The plastic liner of the shorter tape sections may need to be fully removed before installing. -
Install item in proper mounting position while keeping partially removed liner ends accessible.
-
Firmly hold the Body Armors in proper mounting position while pulling the exposed plastic liner to completely remove. Maintain pressure on installed item for 30 seconds to ensure proper contact. Full adhesion occurs within 24 hours of application.
rears where promoter may be visible can be cleaned with acetone solvents or methyl ethyl keystone (MEK). See promotor manufacturer for further detail.
can cause cosmetic damage to plastic surfaces. See promoter manufacturer for further detail. -
Reinstall the license holder, license plate and tailgate lights.
460 Horizon Drive #400 | Suwanee, GA 30024 USA | www.omix-ada.com | Copyright © 2013 Omix-Ada® , Inc
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>